Accuracy International Picture Thread

[deersniper]

^thats what I’m saying.

 

[BuLLet]

Hey Burt, you think these would work on those Ass Blasters? Maybe one of the Shriekers?

Not 300NM but 300WM. I backed them down to 3260fps where they were more consistent, loaded up a bunch for a rainy day...



View attachment 7684512View attachment 7684513

 

[deersniper]

Hey Burt, you think these would work on those Ass Blasters? Maybe one of the Shriekers?

I think you could smoke a Graboid if you place your shot right with 3500fps

 

[zerolumens]

Looks like a LGS, I meant your ammo stash.

my ammo stash is nothing to brag about 1,000 round of 6.5 brass that needs prep. I need to quit being so lazy and reload a ton of 6.5cm. I've just been way too busy this last year with work, I do however seem to have an endless supply of 9mm in a purple crown royal bag that I just can't seem to find the bottom of.

 

[Heretoimproveforhunting]

my stock 300NM barrel really likes the berger 230 factory loads. give the 230s a try. 215s shot just about as well

 

[bfk4lyfe]

Has anyone ran a 6gt or similar shorter 308 bolt face sized round out of an AXMC or AXSR (obviously with the appropriate bolt and mags)?

 

[RS14]

Had the boy shooting the AI positionally today for a little bit. Had the 16.5” 308 barrel on. He is shooting his first centerfire match next month at Altus. It will be a guardian match. And he is 11yrs old.

 

[deersniper]

Can’t wait for mine to be old enough ^

today was the day of the step ladder. Shoulda got some pics of the dog house lol

group from doghouse:

 

[pfl338]

AXMC got new glass Thursday! Shout out to Richard @CSTactical, great customer service and the scope showed up 2 months early!

 

[5-0 MTB]

AXMC got new glass Thursday! Shout out to Richard @CSTactical, great customer service and the scope showed up 2 months early!
View attachment 7685208View attachment 7685209

Where’d you find a Quigley in this market??

 

[zerolumens]

@pfl338 that's a pretty rad camo job. always been curious of those tanget scopes.

 

[pfl338]

@pfl338 that's a pretty rad camo job. always been curious of those tanget scopes.

Camo was easy, bought a tigerstripe silicone sheet stencil, hard part was talking myself into rattle canning a multi thousand dollar rifle,lol, at least now during hunting season the rifle will not stand out like a sore thumb.
I am very impressed with the TT, optical quality is out of this world and the eyebox is very generous, really easy to get behind and get a full view. Turret clicks are VERY positive and the toolless zero is great.

 

[zerolumens]

Camo was easy, bought a tigerstripe silicone sheet stencil, hard part was talking myself into rattle canning a multi thousand dollar rifle,lol, at least now during hunting season the rifle will not stand out like a sore thumb.
I am very impressed with the TT, optical quality is out of this world and the eyebox is very generous, really easy to get behind and get a full view. Turret clicks are VERY positive and the toolless zero is great.

that's great to hear. what reticle did you go with?

 

[pfl338]

Now you just need to spray paint that $4500 TT to match....

Gonna let the "New" wear off first...lol

 

[Huskydriver]

Gonna let the "New" wear off first...lol

Bush league..... Just do it man

 

[pfl338]

that's great to hear. what reticle did you go with?

Its the MOA-XR, which as i understand it, is the only MOA calibrated reticle they offer at this point. Very fine markers, can measure down to .1 MOA with it. I will never shoot good enough to utilize that.

 

[Huskydriver]

Its the MOA-XR, which as i understand it, is the only MOA calibrated reticle they offer at this point. Very fine markers, can measure down to .1 MOA with it. I will never shoot good enough to utilize that.

 

[CSTactical]

AXMC got new glass Thursday! Shout out to Richard @CSTactical, great customer service and the scope showed up 2 months early!
View attachment 7685208View attachment 7685209

You're very welcome! Enjoy your new setup

 

[pfl338]

You're very welcome! Enjoy your new setup

Already am, put 50 338LM,50 308 and 50 6.5CM through it Saturday afternoon.

 

[thrashergrant]

Said goodbye to the AT and upgraded to the AX this past weekend. Had to have it in sage green!

 

[J-Ham]

You need a sage green Spuhr for that bad boy... And guess who happens to have one for ya...

Haha

 

[hafejd30]

Said goodbye to the AT and upgraded to the AX this past weekend. Had to have it in sage green!

And just like that he received 115 pm’s regarding selling the AT and another 1,546 pm’s on just selling the folding thumb hole stock

 

[thrashergrant]

You need a sage green Spuhr for that bad boy... And guess who happens to have one for ya...

Haha

Shoot, I just picked up the black spuhr for the AX... That is quite the temptation, though. PM inbound

And just like that he received 115 pm’s regarding selling the AT and another 1,546 pm’s on just selling the folding thumb hole stock

No doubt! Fortunately the AT went to a good buddy in our shooting crew, thumbhole stock included... haha

 

[wizardpc]

 

[TacticalPlinker]

16.5” 6.5cm PVA finally showed up. Now I just need to find some paint and a good primer. This thing is instantly my new favorite rifle and fits in the old sneaky bag like it was made for it. 15 lbs with bipod and suppressor. Thinking about taking off the RRS plate and installing the factory skin again to save more weight since the Victor co rail has the RRS dovetail. With factory front of Mag well skin and no bipod it would come it at 13.8-13.9 lbs with no mag.View attachment 7673736View attachment 7673737View attachment 7673738View attachment 7673739View attachment 7673740

Nice setup! I'm doing a similar build in a Cadex. Who makes the pack?

 

[96C]

After fallow deer with the 300PRC.

 

[wizardpc]

After fallow deer with the 300PRC.View attachment 7687473

I am unfamiliar with that camo but it looks like it works pretty well in that environment

 

[BuLLet]

On the shooter or the rifle? I think he did the rifle himself...

I am unfamiliar with that camo but it looks like it works pretty well in that environment

 

[96C]

I am unfamiliar with that camo but it looks like it works pretty well in that environment

The clothes are Kuiu 'Verde' camo that is really very dark but works well in winter months.
The bino harness and front support bag are A-Tacs iX which is by far more suitable most of the year.

 

[M8541Reaper]

After fallow deer with the 300PRC.View attachment 7687473

Fuck, that's beautiful.

 

[SkyScrapin]

@96C Pics once you kill the thing

 

[samb300]

 

[VargmatII]

View attachment 7687515

Have you team up with the Norwegian Vision guys?

 

[samb300]

Have you teamed up with the Norwegian Vision guys?

Yes, the Vision Products is making the AI chassis and it's being distributed and sold in the US by GCP Rifle Co in Florida

 

[wizardpc]

So as a baby AXMC owner, I am having trouble figuring out whats going on here:
Accuracy International AI-6867: AXMC .300 Win Mag Doublestack (12 Round): $98.21
vs
Accuracy International AI-26091BL: AX/AXMC .300 Win Mag Doublestack (10 Round): $152.89

I actually have two questions on this. First, why on earth is a 10 round mag 50% more than a 12 round mag?
And second, does the "AX/AXMC" designation in the 10 round model mean that AX Long Action and AXMC magazines are interchangeable?

 

[hafejd30]

So as a baby AXMC owner, I am having trouble figuring out whats going on here:
Accuracy International AI-6867: AXMC .300 Win Mag Doublestack (12 Round): $98.21
vs
Accuracy International AI-26091BL: AX/AXMC .300 Win Mag Doublestack (10 Round): $152.89

I actually have two questions on this. First, why on earth is a 10 round mag 50% more than a 12 round mag?
And second, does the "AX/AXMC" designation in the 10 round model mean that AX Long Action and AXMC magazines are interchangeable?

One is for the early models (mine is 2013 and uses the $98 in my AXMC)

Other is for newer models

 

[AXMC]

View attachment 7687515

Sam, are those vision weights stackable?

 

[samb300]

Sam, are those vision weights stackable?

 

[Huskydriver]

View attachment 7687515

Clean AF....

 

[AXMC]

View attachment 7687578View attachment 7687579

Nice!
I'm assuming from your statement in the "official" announcement of the Vision/AO chassis today , " External weights compatible with all Vision chassis', as well as all other M-Lok chassis such as MDT ACC" that these will work with a Gen 1 AO chassis?
Thanks

 

[samb300]

Nice!
I'm assuming from your statement in the "official" announcement of the Vision/AO chassis today , " External weights compatible with all Vision chassis', as well as all other M-Lok chassis such as MDT ACC" that these will work with a Gen 1 AO chassis?
Thanks

Yes they will work!

 

[hic28]

 

[trob_205]

Nice setup! I'm doing a similar build in a Cadex. Who makes the pack?

Sneaky Bags

 

[hk401]

Axsr 308 bolt body is back in the stock at milehighshooting. Just heads up.

 

[Huskydriver]

Axsr 308 bolt body is back in the stock at milehighshooting. Just heads up.

@MNTC has one listed here

 

[BuLLet]

EuroOptic has mine in stock as well and shipping out to me today. I thought it was going to be a complete assembly including the firing pin/housing... it's just the bolt. I don't see a complete assembly for an AXSR, so... I'll have to use the shroud and firing pin assembly from the 300 WM or 338 NM bolt I already have.

Axsr 308 bolt body is back in the stock at milehighshooting. Just heads up.

 

[zerolumens]

Went out last night to try my newest acquisition with my Amigos!. the vudoo 360 in the AI chassis suppressed is a riot.
I know it's technically half AI, but there's two other AI's present so it counts @Huskydriver !!! lol btw thanks @Krob95
** I need a higher power scope to see those tiny ragged holes the 318i isn't cutting it.

 

[Krob95]

Muh hart is cracked

Enjoy it brother! I’m glad it went to a good home

 

[jbuck88]

Having some fun this morning. All the lower elevation places to shoot were fogged in pretty bad. So had to head up to the top of the mountain.

 

[deersniper]

Wow^