-
Having trouble using the site?
Contact support
My first ai! Just got it all set up and ready for range time.
No shooting the wildlife! We also had a check fire when the turkeys came across the line.
I like it. You have to reposition the scope a notch or two forward and the NF's objective turns when you add or decrease magnification, which alters the orientation of the TC, but I like it better than the Tactacam 5.0 I also have.
Got a new 45 moa mount and had to get the rail machined to 0 moa. Had to zero and test it out on some more rabbits.
Live @ the sand pit. More Tripod practice.
12" 6.5 CM with Dominus K.
Still figuring which projectile will be best. Heavies for short barrels have given me best consistency and ES versus chasing lighter faster loads. A 140g Hybrid or 156g Hybrid at 2450-2500fps seems achievable.
Still figuring which projectile will be best. Heavies for short barrels have given me best consistency and ES versus chasing lighter faster loads. A 140g Hybrid or 156g Hybrid at 2450-2500fps seems achievable.
Man that's nuts it you can get 2500 with a 140 from a 12. I max pressure with a 140 out of a 16 at 2450
Triggercam 2.1
Aircraft grade aluminum and proprietary anti shock materials: Military grade design, engineered to withstand recoil force and unforgiving outdoor conditions Dimensions L x W x H : 100mm x 50mm x 93.2mmWeight: 453 gramsRifle Scope Eyepiece compatibility: 32mm – 48mmSmart Phone APP: TRIGGERCAM 2.1...
www.nedvedprecisionshooting.com
Man that's nuts it you can get 2500 with a 140 from a 12. I max pressure with a 140 out of a 16 at 2450
It's 100% percent about finding the right powder. With my 308W, I went with a faster powder and medium weight projectiles. With this 6.5CM, a friend ran some figures through QL and almost all of the preferred powders with near 100% powder burn are actually a slower powder type (RL16, 26). H1000 gave me too many secondary ignitions inside the suppressor with a 20" 300WM so it's off the table.
A few of the AI mafia were at Quantico's R4 today shooting 1,000yds today. A 50BMG, 6.5CM, 6CM an me with my AT-X in 6BR were on the line. My 6BR was struggling as it was only going about 2645fps; I need to reload and get this moving at 2925fps or so.
Bonus picture for all our Marine friends who long for the days when they were on a Sunday morning road march in their LAV (sans chain gun) when it's 93 degrees with 82% humidity.
Bonus picture for all our Marine friends who long for the days when they were on a Sunday morning road march in their LAV (sans chain gun) when it's 93 degrees with 82% humidity.
Last edited:
I like how your forend has a full length ARCA for various bipod mounting positions
Had to keep with the factory look
A few of the AI mafia were at Quantico's R4 today shooting 1,000yds today. A 50BMG, 6.5M, 6CM an me with my AT-X in 6BR were on the line. My 6BR was struggling as it was only going about 2645fps; I need to reload and get this moving at 2925fps or so.
Bonus picture for all our Marine friends who long for the days when they were on a Sunday morning road march in their LAV (sans chain gun) when it's 93 degrees with 82% humidity.
Riding Beats rucking.....
That Marine in the back is brave riding open hatch like that while looking forward.... Good way to get a massive Copenhagen long cut spit spray in the face from the TC or gunner...I have seen it happen
I wouldn't know about that being the AF village guy...Riding Beats rucking.....
That Marine in the back is brave riding open hatch like that while looking forward.... Good way to get a massive Copenhagen long cut spit spray in the face from the TC or gunner...I have seen it happen
This is accurate.
Will never forget watching AF bubbas get driven to the flight line in a golf cart… while I slogged along on foot in the FL summer heat, cursing their economy of motion and budget excesses.
I told myself “that’s weak!”… but was probably still 10% jealous.
Pretty decent match day out in BFE Rawlins. First time running the 22GT in a match this year, forgot how great it was to shoot 
hammers pretty good for missing a chunk of groove at the leade 
hammers pretty good for missing a chunk of groove at the leade 
What kind of mileage do you get with your SUV.A few of the AI mafia were at Quantico's R4 today shooting 1,000yds today. A 50BMG, 6.5M, 6CM an me with my AT-X in 6BR were on the line. My 6BR was struggling as it was only going about 2645fps; I need to reload and get this moving at 2925fps or so.
Bonus picture for all our Marine friends who long for the days when they were on a Sunday morning road march in their LAV (sans chain gun) when it's 93 degrees with 82% humidity.
Last edited:
PVA wouldn't even return any of my emails after a couple of times trying to contact them. Ordered my 300NM Proof through Front Range Precision. M27 shank barrels are easy to find since it's 1.250. M30 blanks are much harder to get and even then, not too many people have prefits ready to go. Bugholes usually has some blanks in stock, just search for 1.350
Hope you guys enjoy some AT action. Just filmed and edited today by me, but got some pretty cool trace.
Last edited:
Im so used to right handed actions at this point it doesn't bother me at all lol.
So my fixed pistolgrip AT is now a folder thumbhole, and vice versa with the ATAICS. Yes I know I need to take out the barrel screw plug out
Just 10%? Come on now...be honest...This is accurate.
Will never forget watching AF bubbas get driven to the flight line in a golf cart… while I slogged along on foot in the FL summer heat, cursing their economy of motion and budget excesses.
I told myself “that’s weak!”… but was probably still 10% jealous.
Oh, anyone got a vid for full bolt breakdown? I need to coat the shroud on my AX so figured Id ask before I started pulling things apart.
Just pull it apart and figure it out later.... be a man.
Also, think of all the spare parts you'll have after.
Im kind of ghetto-rigging mine right now but it works. I have a Vortex Diamondback HD 16-48x65 with a phone mount on it, and then I use my iPhone. At some point I'd like to do a Swaro or something with a proper camera, but for now this will do lol.
Last edited:
Just watch for the tiny ball bearing and spring inside the safety when you pull the shroud apart
This is my usual tactic - may as well stick with it.
Piece of cake. Downside it that 3 weeks after buying this rifle… I finally realized I don’t actually have any spare glass for it.
Rip.
Rip.
@trophyhunter will open the bolt face - just looking for feedback on different magazines that are used.
I asked @Sniperwannabee somewhere in a thread and he said he uses Accurate 300 WSM mags without modifications.
So I just placed an order with MHSA for an AI AX. But I just realized the 308 barrel is a 20” plain muzzle. I checked on AI website and it shows the 308 AX comes with a 24” barrel with a muzzle brake. Did I order a super old model? Just want to make sure I am not mistaken…. Thanks in advance
SKU:AI : AXSA : SA30820SBL
SKU:AI : AXSA : SA30820SBL
Call them tomorrow morning. They open at 10am MST. They may be able to swap it out for a threaded barrel before it ships.
Similar threads
