Accuracy International Picture Thread

[BCX]

I’m sure one of the AI experts will chime in…

 

[Fixr]

Spun the 33xc barrel on and realized I never purchased a single shot sled . View attachment 7929562

I'm not familiar with that cartridge, but if that rifle uses a standard AXMC 338LM mag you could print one. If you don't have the capability I could print one for you.

Spun the 33xc barrel on and realized I never purchased a single shot sled . View attachment 7929562

I'm not familiar with that cartridge, but if the rifle uses a standard AXMC 338LM mag, and you have the capability you could print an insert. I can send you an STI file.

 

[Whaburt]

Sounds like he doesn't have to mow then, just blow the leaves into his neighbor's yard, leaving more time for shooting, reloading or general fucking about... Seems like a no-brainer to me!

It's 100% turf and worth every penny. No more mowing, fertilizing and irrigating, more time for bourbon and putzing around.

 

[MOUNTIC]

I just shot my 33xc on my AXMC over the pass weekend. I pierced few primer even at low node. The range master who also a gunsmith suggested me send my bolt with firing pin to LRI for bushing. He told me a lot of AI with large firing pin having this issue.

This is the way unless you want to buy SFP bolt bodies and the 1.6mm firing pin assembly. Just make sure to send in all the LFP bolt bodies you have at the same time. If you go this route and buy a bolt body down the road for 308 just say, make sure you buy the SFP bolt body as your firing pin assembly is already turned down.

I have been shooting a ton of 338 LM hand loads in my AXSR this year, knock on wood…. no pierced primers. I think I read somewhere that the AXSR bolt is already bushed?

The AXSR has the 1.6mm (small) firing pins and bolts from the factory. No need to do anything.

 

[Kopfjager1]

Just got a shipment notification for the AXSR .308 Win Bolt RH from Euro Optic, they are in stock right now for those interested.

 

[lethalsquirts]

Just got a shipment notification for the AXSR .308 Win Bolt RH from Euro Optic, they are in stock right now for those interested.

Thanks for the heads up. I snagged one.

 

[AK74U]

After YEARS & YEARS of dreaming, it has finally come to fruition!! AI AXSA 6.5CM!!

 

[Krob95]

Congrats man! Welcome to being better than everyone else

 

[AK74U]

The setup took me out to 1,950 yards. Worth every penny for sure!

Congrats man! Welcome to being better than everyone else

 

[roberthu526]

Quick question on barrel swap on an AXSA: to change from 308 to 6.5CM, do I only need a new barrel or do I have to do something about the bolt too?

 

[phlegethon]

Quick question on barrel swap on an AXSA: to change from 308 to 6.5CM, do I only need a new barrel or do I have to do something about the bolt too?

Just the barrel. They use the same 0.473" bolt face.

 

[81sfo]

Just the barrel. They use the same 0.473" bolt face.

Just another barrel that Is for a short action AI.

 

[roberthu526]

Sorry about the double post. Deleted now.

 

[LONG RNG]

Quick question on barrel swap on an AXSA: to change from 308 to 6.5CM

Was replied to above....

 

[roberthu526]

Just the barrel. They use the same 0.473" bolt face.

Thank you!

 

[roberthu526]

Just another barrel that Is for a short action AI.

10-4 thanks!

 

[roberthu526]

Was replied to above....

Yeah something happened to my phone and I didn’t realize I already posted it. Thanks!

 

[Hennig]

Whelp - AO/V en route for the Ax, AO en route for the AT.

Double upgrades!

 

[96C]

 

[BCX]

How does that Proof pre-fit shoot?

 

[96C]

How does that Proof pre-fit shoot?

They are good, the 300PRC and 6.5CM on this rifle are excellent. I've had 5 proof barrels (4 CF, 1 steel) now in various calibers, they have all been solid.

 

[Carnifex]

Anyone have the toque value for the 2 silver screws that hold the trigger to the action on an AXMC?

 

[Vivacious Stallion]

Just got a shipment notification for the AXSR .308 Win Bolt RH from Euro Optic, they are in stock right now for those interested.

I picked one up as I slowly continue to save up for an AXSR

 

[Krob95]

Anyone have the toque value for the 2 silver screws that hold the trigger to the action on an AXMC?

Tight.

 

[Krob95]

Had to go drop off and pick up some primers in the springs Saturday and made a little detour out to Buena Vista to the public range where I happened to meet a fellow man of culture shooting an ATX. Hands down the nicest public free range I've been to even if it only went out to 600yds.

 

[Rhed]

I’m assuming these marks are from the spent casings?

 

[Krob95]

View attachment 7934615
I’m assuming these marks are from the spent casings?

Yeah. My receiver has the same marks.

 

[carbonbased]

View attachment 7934615
I’m assuming these marks are from the spent casings?

Those are notches indicating the number of dead steel plates.

 

[blbennett1288]

View attachment 7934615
I’m assuming these marks are from the spent casings?

Put a velcro strip right there to protect that area

 

[Huskydriver]

Put a velcro strip right there to protect that area

 

[Tex68w]

Put a velcro strip right there to protect that area

Ditto, easiest fix if that sort of thing bothers you.

 

[Rhed]

Yeah. My receiver has the same marks.

Oh thank goodness! I seen that when cleaning it after the range. And I said WTF? Out loud. and my wife said what! what happene? I showed her and she said “ cut your dam nails!” Yea, she really thought it was from my fingernails.. wtf!

 

[MysizeisMAGNUM]

I use bubble wrap on mine

My thoughts exactly. Be a man, scuff up your rifle!

 

[Huskydriver]

I use bubble wrap on mine

Pics or it didn't happen.....

 

[Njc]

I saw this picture on the precision rifle blog and it’s been my goal ever since. Have a loooong way to go.

 

[roberthu526]

I saw this picture on the precision rifle blog and it’s been my goal ever since. Have a loooong way to go.

I am getting there. I only have about 16,940 rounds left since I am still waiting for the rifle.

 

[austino775]

I saw this picture on the precision rifle blog and it’s been my goal ever since. Have a loooong way to go.

Its beautiful!!!

 

[TylerN]

I saw this picture on the precision rifle blog and it’s been my goal ever since. Have a loooong way to go.

AI forgot their piece of Velcro on that rifle.

 

[wizardpc]

AI forgot their piece of Velcro on that rifle.

The official AI velcro is $199

 

[Krob95]

The official AI velcro is $199

And is expected q3 of never

 

[wizardpc]

And is expected q3 of never

then the left-handed version only 72 months after that

 

[carbonbased]

Ok I made a sticker for you fags and your little notches

 

[Krob95]

Ok I made a sticker for you fags and your little notches

View attachment 7934826

I only want one if it's buttercup

 

[carbonbased]

I only want one if it's buttercup

 

[Krob95]

Better, I'll take two

 

[kthomas]

The official AI velcro is $199

Is it shaped like an erect cock and balls to match the AI Keyslot?

 

[carbonbased]

Is it shaped like an erect cock and balls to match the AI Keyslot?

Goddamnit people I’m working my fingers to the bone here

 

[metalicat]

I am in for a few if you start selling them !.....not the dick ones....lol

 

[carbonbased]

I am in for a few if you start selling them !.....not the dick ones....lol

NO STICKERS FOR YOU!!!

Except this one

 

[Tex68w]

Those skits were hilarious.