-
Having trouble using the site?
Contact support
That is out of spec to both STANAG and MIl-STD. In both cases they can be 5.23mm(.2059") and .206" respectively.Has anyone had issues mounting ADM quick release mounts on Elite Iron AI spigots? The recoil lugs on the ADM mounts won't fit into the picatinny slots of the EI mounts. I measured the slots on two different EI spigots using calipers and every slot is 0.197". The ADM mounts will seat properly on my G Mk16 rail and HK416 rail. The distance of the slots on the G/HK rails is 0.208/0.203. I sent EI an email so we'll see what they can do.
Does anyone have experience running the AXSR LA chassis for rem700? Considering it for an ELR build
Just my opinion but if you want to go with a 700 or 700 clone build, buy a tacops. If you want the ai chassis, go the extra mile and get the real deal
And that is completely understandable! I love the look of the chassis an I love and have shot AI's before. That being said, I don't have 9800-10000 to buy one on Euro Optic and the like. I am getting an ARC CDG for my PRS build(6GT) and an ELR Build(7mm PRC) and thought why not try to bridge the two?
Not exactly to your question, but several shooter's at Quantico are running Rem 700s in 30-06 in an AI chassis - absolute hammers.
ETA - In AT chassis.
Last edited:
If it’s what you want then go for it. Watch the px here they come up used. If you go that route you won’t loose much $$ if you decide to part with it in future.
Keep in mind the system is what makes AI an AI. I’ve run a 700 in an AT style chassis and the weight is obviously less with the 700. But the action smoothness, 90° bolt throw and AICS mags I was running made the feel not even close to my AIAT.
For other platforms I really like MDT or KRG options
Actually getting an AI is obviously the best route but it’s understandable a person can’t just jump into that
I reached out to them about this and received this response:
“Currently we do not have any used AXMC's available. Anytime we do get them they get listed on Gunbroker so it is best to keep checking there.”
Can’t hurt to call, though!
I will agree 100%! If it didnt require a special inlet, i would go with the M2013 from badger. I love the design of the new ARC action and thought they might pair well together with a nice benchmark or bartlein barrel. It just blows my mind that this rifle with that, a TT Diamond 2 stage, TBAC Bipod, ARC Mbrace mount and a zc527 is still less than a new AXSR but hey it's a system like you said, not a bunch of mashed up parts
IF you want a 60 degree like the m2013/AI then go with the GAP tempest and toss it in a Ai chassis or whatever of your choice. Bolt is of AI design but sits in a 700 clone platform. Takes 700 triggers and uses the better AW mags.
This was me attempting to scratch my AI wanting itch….as nice as it was it just wasn’t what I wanted. To this day I don’t regret the multiple guns I sold to buy what I really wanted
This was my GAP in a Cadex
Been scratching the AI itch for over 20 years now... thankfully it never required me selling any of my multiple guns to satisfy.
Funny thing is I'm still damn itchy!
Funny thing is I'm still damn itchy!
Didn’t have to sell many for the AT which is what I purchased first. $3300 off the px here. With the folding thumbhole. Don’t see those prices anymore it seems and that’s only a couple years
I don't even think it's been 1 year when I bought my AT for 3k with no barrel. Crazy how the market for them has been.
That said it would still be worth it at the 4k price you can find then for now.
Edit: if you have the itch I'd seriously save up and pick something up used (not from dremel daddy). I spent a lot of money trying to do what you are and still ended up with 2 AIs in the past 5 years. (Didn't learn my lesson the first time) .
If I found one with a shot out barrel, I'd probably be all over it and just rebarrel it. After looking at some of the shooters in ELR(sub 2500 yards mostly) trying out the 7mm PRC and comparing it to a load ive used before in 300 PRC, i'm definitely dead set on a 7 prc, however that manifests
My first one was a AWSM in 338 Lapua.... cost new was about 4k. Only had single port brakes when I first got it, upgraded to this dual port, made a big difference.
Back then, never seen one @ any range I visited.
This is from my old school AI pic
Back then, never seen one @ any range I visited.
This is from my old school AI pic
Still searching for the DE MC to go with this AXSA and DE SR. You sure you don't want to part with yours?That dark earth AXMC just agrees with me
My first one was a AWSM in 338 Lapua.... cost new was about 4k. Only had single port brakes when I first got it, upgraded to this dual port, made a big difference.
Back then, never seen one @ any range I visited.
This is from my old school AI pic
View attachment 8085469
As in your the king of cock?
Bro!! Lay off the cheeseburgersSeems like a homo either way. Which is odd because I can't imagine there's too many of them in Utah. But it checks as his pfp is a Cheytac
and hit the treadmill.
You got me brahAs in your the king of cock?
Oh dang, I thought you'd snagged a DE AXMC and were showing it off.
I wish to keep mine - but hopefully this lights the beacon for anyone else here.
Why spend 30k on hardwood when you can spend 29500 on a thermal and 500 bucks to do linoleum in the entire house?
Idk if you can see it is being removed. Was in here when I bought the place.
Also.
Luxury vinyl tile FTW. Has cushioning , it’s a gun room / kids play room basement lol. Who gaf
Now I see why most say buy once cry once...but it all depends how long that one cry is lmao
New AXSR, full setup(optic, mount, bipod, etc) with a PRS barrel(6gt or 6 creed) and ELR barrel(7 PRC) with appropriate bolts...just a hair over 18 grand lol
Edit:
Brand new AXSR 300 win mag
1x 7mm PRC Barrel 1x 6mm barrel both in FDE and wrench flats
2x suppressor mount brakes(I like the PVA rugged suppressor brake and then attach the rugged mounting system to whatever can im running)
1x TBAC bipod
1x ARC Mbrace mount
1x ZC527
New AXSR, full setup(optic, mount, bipod, etc) with a PRS barrel(6gt or 6 creed) and ELR barrel(7 PRC) with appropriate bolts...just a hair over 18 grand lol
Edit:
Brand new AXSR 300 win mag
1x 7mm PRC Barrel 1x 6mm barrel both in FDE and wrench flats
2x suppressor mount brakes(I like the PVA rugged suppressor brake and then attach the rugged mounting system to whatever can im running)
1x TBAC bipod
1x ARC Mbrace mount
1x ZC527
Last edited:
I drive a car that looks like this:
(13 years old, 185k miles)
So I can drive a rifle that looks like this:
I really need to take an updated version of that pic now that I have a 338 LM barrel and a PVS27
I simply invested the kid's inheritance in AI.
I definitely need to get a better paying job or another stream of income. I'm a clinical RD and the corporate medical industry is pretty shitty.
The other day I told my 3 year old daughter we needed more ammo $$ so she was going to Bangladesh to make sneakers for $.15 an hour to support dads habits
Next two hours she followed me around asking to go to Bangladesh
Let us know how it works out when she tells your wife and you have to explain that one.
Well. Don't come to the oilfield if you’re looking for that better paying job. This is the best I can do 
Similar threads
