Or do they…
-
Having trouble using the site?
Contact support
Looking at some AI 1.5 chassis parts. A shop in England has them. Shop is called Sporting Services out of Henfield. Are they legit?
Last edited:
Put some more rounds through the AT-X today. Was getting consistent hits at 1,100 yards off the bag.
They have really good customer service too. I have order stuff from them that wasn't even on their website.
Comtac V. I've had these and a set of Comtac 3 and they've been good. Comfy to wear, good enough suppression and the electronics sound natural and don't cut out or amplify weird buzzing like insects.
This how the AIAW shoots.5shot groups @ 100 yards
Last edited:
Vivacious Stallion
Public Health Authority for the Shadow Gov
Supporter
Full Member
Minuteman
Supporter
Well now that my AXSR is back from AI with a new and not dead trigger, I'll be out sighting that back in today.
On a side note, at least FedEx actually delivered it to the right place, unlike the last several boxes they've shipped me
Spotted at our QSC PRS rimfire match Saturday, an ATX in rimfire (belongs to a Team AI guy), along with an old school Annie they took out of the AI vault.
Your not kidding, I messaged them at 8:00 last night and got an answer back. Super stoked about the thumbhole grip coming in
That gun straight up hammers
Attachments
At the 1000 yard line with some not so accurate AP ammo, punishing the berm and my target frame
Well, at least you didn't hit a sensor...At the 1000 yard line with some not so accurate AP ammo, punishing the berm and my target frame
View attachment 8132080View attachment 8132081
Poor in stupidity wealthy in intelligence. $10,000 plus rigs are a waste of money for most.
We apologize for the interruption. And now, we return you to our regularly scheduled programming.
Last edited:
I've been working on this 16" barreled AE Mark III project for a while now waiting to find the right scope for it. Big thanks to @Silvan for providing it so I can finally start shooting this baby!
It's a 50, you just need to get close to damage stuff, I found the blue sensor about 8 feet away hiding under the catwalk.
Took a couple of new shooters out today. He hadnt shot anything bigger than a .223 and his wife had never shot any sort of firearm. We started with rimfires and worked up to the .338, both managed to get sub moa groups at 100 with the 22-250 and the .260 barrels on the AT. Finished up with a couple of shots each out of the AWSM. Always a good feeling sending people home with a smile on their face. Too busy supervising to take photos so staged these before we packed up.
First time AI owner, owning an AI has always been a holy grail gun for me. Couldn’t be happier with my purchase, had to give it a proper camo job because black guns are boring
AT-X 6.5 Creedmoor
NF NX8 2.5-20
SilencerCo Specwar 7.62 with Dead Air Xeno mount
Magpul K2+ grip
Harris bipod with Area 419 Arca adapter
AT-X 6.5 Creedmoor
NF NX8 2.5-20
SilencerCo Specwar 7.62 with Dead Air Xeno mount
Magpul K2+ grip
Harris bipod with Area 419 Arca adapter
100%. My AI AT became my favorite rifle over night. Wouldn’t rethink my purchase for a second
GRIPPY CHEEKREST FOR ACCURACY INTERNATIONAL
Our overmolded Grippy Cheekrest gives you a proper cheekweld under any conditons. Wet or dry, sun or sweat, your cheek will always have the proper amount of grip.Designed to replace the AICS cheekrest, it utilizes the OEM AICS comb frame and screws. It only takes a moment to install. NOTE:(Does...
victorcompanyusa.com
or
Accuracy International AT-XC AX AXSR AT | hoptic
The HopticUSA Saddle Blanket for the Accuracy International AIAX, AIMC, AIAT, now AXSR Chassis.AT-X AT-XC *Note this platform is being shipped with two differet size cheek risers. Some have the same riser as the AX and some have a new slim line with smaller wings on the side (See photos) If...
www.hopticusa.com
I already have the saddle blanket and the wiebad pad.. and that Victor company one looks the same as the original.
I was wondering if there were any of a completely different design. I'm guessing not.
I was wondering if there were any of a completely different design. I'm guessing not.
I would reach out to @pfl338, He had done some for the MC. He might be willing to do something for the AT.
I Noticed that they sell two separate aw magazines for the AI. One is sold for the At and one for the AT-x. Has anyone noticed more reliability when shooting 6br with the new mags. The older AT mags have been a pain even with the hrd kit. I’m constantly getting my last round nose diving inside the magazine.
I could be wrong. But the AW and AT share the 0726 magazine and the AX and AT-x share the 6677 magazine. Although the AT-x has its own magazine that is now sorta out.
The 6677 has a lip on the top front of the magazine to keep it elevated.
That said I have two 6677 magazines I've used with hrd kits. One feeds flawless and the other will feed rounds 10-4 and I get nosedives with 3rds left occasionally.
The 6677 has a lip on the top front of the magazine to keep it elevated.
That said I have two 6677 magazines I've used with hrd kits. One feeds flawless and the other will feed rounds 10-4 and I get nosedives with 3rds left occasionally.
The Victor Company offering is almost the same dimension and fit as the original, but is made out of some material that IS more grippy and comfortable without the addition of blanket or pad.
Different shape I think. Current one is quite wide and thick.. I think I'd prefer something a little more streamlined.
Ah right okay. So more grip and padding without beefing up the size of it.
I think this is one of my favorite threads!! I wish I could afford one of these beautiful guns.
Everything is attainable with the right planning and dedication.
What happened to your trigger?Well now that my AXSR is back from AI with a new and not dead trigger, I'll be out sighting that back in today.
On a side note, at least FedEx actually delivered it to the right place, unlike the last several boxes they've shipped me
I thought the trigger issues were fixed? Anyone know what build years that the issue was resolved?
They get resolved when you throw em in the trash and get the regular trigger pack.
I really don't get how they could make the things AI does and fail so hard at a "comp" trigger. I won't own one and it doesn't effect me personally but it's one of the things that drive me nuts about AI. They should have that barret contract.
And the regular trigger isn’t bad in the first place
Agreed original trigger always fine IMO.
For the record; the comp trigger is nice and I haven’t had any issues with it up to this point.
For the record; the comp trigger is nice and I haven’t had any issues with it up to this point.
Vivacious Stallion
Public Health Authority for the Shadow Gov
Supporter
Full Member
Minuteman
Supporter
The short answer is sand.
Subjecting guns to this blowing sandy crap for a couple matches every month makes them not feel too good. I've seen several triggertech diamonds stop functioning during matches since moving here last year. The AXSR trigger pack started having intermittent failures to release at a match 2 weeks back. I've never had any kind of malfunction with the system before this. I see lots of AICS style mags malfunction from the sand.
AI said they just wanted me to send the whole gun in to assess. To their credit they turned it around within 6 hours of receiving it. Which is good because I need it for the Coal Canyon match in Raton next week, so I can look cool while missing targets.
Agreed I never felt I needed lighter than the regular trigger can give. My tighter groups I've ever shot have been with the AI trigger at a combined 3lbs give it take.
I will say even my rem700 fancy triggers I've never run less than 1.25# though and even then that's only one gun. Everything else is 2#+. I feel like anything super light is a crunch but that's just my opinion that probably is very unpopular in the match scene.
No ZCO?We apologize for the interruption. And now, we return you to our regularly scheduled programming.
Damn tough crowd, thought the S&Bs would pull me through...
Similar threads
