Accuracy International Picture Thread

#16,101
VSP968 said:
Only if it is an AT AICS chassis that looks like this will the hinge work on the AT rifle because the hinge is bolted and bonded to the chassis.

View attachment 8280632

View attachment 8280646

Earlier AICS like this are pinned with 8mm pins and bonded together and will not “bolt on” the AT rifle chassis.


View attachment 8280634

View attachment 8280644

The front skins absolutely will not fit, however the butt skins are a direct bolt on to the hinged AT butt skeleton because the dimensions of the L shaped skeleton have never changed on any folding AI rifle with a thumbhole.


View attachment 8280635
Click to expand...
Thanks @VSP968 very helpful

Thae chassis i'm looking at is the newer type.

I incorrectly assumed you could buy a hinge and add it to the AT.

Might have to break out a hammer and blowtorch to convert it and run the AT chassis on the bergara 22 trainer...
 
#16,103
A decent showing of AT-X's in our club. Interestingly, all three of us finished the season in the top 10 with the owner of the red one actually winning the season.
received_1425265908097181.jpeg
 
  • Like
Reactions: Woodland_Wolf_M81, xxflyingturtlexx, kdhope and 11 others
#16,108
TheBigCountry said:
Sheesh got enough stuff
Click to expand...
Never! Still a few things I "need"
Dr. Strangeglove said:
Curious to hear your thoughts on the ELR bipod vs the ATAC
Click to expand...
ELR is obviously more competition focused than the ATAC. It's good. Tightening enough to lock out all the cant can be difficult but not as bad as on the ATAC. Certainly a good option if you can justify the extra few hundred for a Ckyepod. I've got a Gen 1 ELR. I'm working on getting the newest Gen to try that.
rbutcher said:
He forgot his pack of condoms, when you win a match with an AI, gorgeous women throw themselves at you with reckless abandon.
Click to expand...
I won't be winning that's for sure. Maybe Limited Division I might! Does that count?
 
#16,117
JayjayUK said:
Never! Still a few things I "need"

ELR is obviously more competition focused than the ATAC. It's good. Tightening enough to lock out all the cant can be difficult but not as bad as on the ATAC. Certainly a good option if you can justify the extra few hundred for a Ckyepod. I've got a Gen 1 ELR. I'm working on getting the newest Gen to try that.

I won't be winning that's for sure. Maybe Limited Division I might! Does that count?
Click to expand...
I was curious because I had an ELR that, in messing with it, just didn't really jive with the way I use a bipod for PRS. I've sent it back and been considering an ATAC instead. Definitely appreciate the info!
 
#16,118
MOUNTIC said:
Just a heads up fellas, price increasing on some AI stuff is taking effect today. Barrels, chassis, etc. Guns and other items going up after first if the year. For guys on the fence, time is now before we see another $500 jump on SRs.
Click to expand...
I was gonna say, $10,400 for an AXSR was starting to feel too low
 
  • Haha
Reactions: J-Ham, vh20, TylerN and 1 other person
#16,133
PrecisionRifleGuy said:
View attachment 8286072Brand new rooftop barricade at our club. The AT-X did well on it.

Im loving shooting 6 creedmoor through it for PRS comps. What are people doing to get BR variants working well in their AT-X? Is it worth going to 6 GT?

Im running 108gr ELDM fast at 3158fps
Click to expand...
AX mags with HRD gears 6mm mag kits have worked well for me in an AX and ATX with zero issues for 6BR
 
  • Like
Reactions: xxflyingturtlexx, TheBigCountry and PrecisionRifleGuy
#16,134
I was just putting together my new AI AT and I was installing the thumbhole stock and I think one of the screws is missing and maybe the washer. Does anyone know the specs on the screw and confirm that the washer is missing? I bought it from sporting services in the UK some years ago. Who would I need to contact for the screw and possible washer? Any help would be appreciated. Thank you

AB7F05C3-30E3-4FF5-93D5-C7D48AE0862A.jpeg
9B19C2DB-8609-4ECA-8C31-A6D6F33C2A3D.jpeg
 
  • Like
Reactions: JonKleman
#16,135
Doctorwho1138 said:
I was just putting together my new AI AT and I was installing the thumbhole stock and I think one of the screws is missing and maybe the washer. Does anyone know the specs on the screw and confirm that the washer is missing? I bought it from sporting services in the UK some years ago. Who would I need to contact for the screw and possible washer? Any help would be appreciated. Thank you

View attachment 8286556View attachment 8286558
Click to expand...
Call MileHigh

I had the same thing happen and they can get em
 
  • Like
Reactions: Doctorwho1138
#16,136
Any one knows what's the spec of the forend grip screw of AX? I'm so dumb that I lost both of them in abyss during disassembly. Now I have to find a replacement for them. Did some search on the internet and no luck.
 

Attachments

  • 6406_grande.jpg
    6406_grande.jpg
    29.4 KB · Views: 40
#16,138
PrecisionRifleGuy said:
What are people doing to get BR variants working well in their AT-X? Is it worth going to 6 GT?
Click to expand...

I had nothing but problems with AW mags (tried all 9) with HRD spacer kits and Lapua 6BR brass with 108ELDM. Probably an 80% stoppage rate (At least one stoppage out of each magazine, generally towards the last few when spring tension was easing off). It was amazingly accurate, easy to shoot but feeding from double stack mags didn't work.

Now with the 6GT, Alpha brass, 110gr ATIP' it's maybe a 0-5% stoppage rate per magazine (From the couple of hundreds of rounds fired, it's maybe had 2 or 3 hiccups, which were probably at least partly my fault short stroking). Without spacers. Absolutely a different kettle of fish. Running them at 2830fps, not pushing them at all. I think 6CM is too fast for our ranges, 6BR didn't feed, the 6GT is a good in between with plenty of gas left in the tank if needed for hand loading.
 
  • Like
Reactions: TheOfficeT-Rex and PrecisionRifleGuy
#16,139
TheBigCountry said:
I know he’s a damn traitor

I’ll probably snag a 6.5 creed barrel
And run the dog shit out of it. Cheaper that way.

Just waiting on a damn AO thumb rest now too
Click to expand...

I heard he's living with some poors terminus trying to get aw mags to actually work lol... Imagine going from running aw mags flawlessly... To well... Not 🤣 sorry @Krob95 you are welcome back any time homie
 
  • Haha
Reactions: carbonbased, Krob95, TheBigCountry and 1 other person
#16,141
96C said:
I had nothing but problems with AW mags (tried all 9) with HRD spacer kits and Lapua 6BR brass with 108ELDM. Probably an 80% stoppage rate (At least one stoppage out of each magazine, generally towards the last few when spring tension was easing off). It was amazingly accurate, easy to shoot but feeding from double stack mags didn't work.

Now with the 6GT, Alpha brass, 110gr ATIP' it's maybe a 0-5% stoppage rate per magazine (From the couple of hundreds of rounds fired, it's maybe had 2 or 3 hiccups, which were probably at least partly my fault short stroking). Without spacers. Absolutely a different kettle of fish. Running them at 2830fps, not pushing them at all. I think 6CM is too fast for our ranges, 6BR didn't feed, the 6GT is a good in between with plenty of gas left in the tank if needed for hand loading.
Click to expand...

I run 6bra flawlessly in the vision chassis with hrd kits...

With no shim or whatever else AI is using on the gen 4.63v.2.1 lol
 
Last edited:
  • Haha
Reactions: MysizeisMAGNUM, carbonbased and Krob95
#16,142
My experience with HRD kits and AX mags:

6 Dasher will occasionally nose dive on the last round if I run the action slow. If I run the bolt fast it works 100%.

22BRA fireforming and formed cases will 100% nosedive on the last round. However if I run the bolt as fast as possible then they work 100%.

I dunno why but I find reliability with bolt speed. And I'm guessing Dasher does better than BR/BRA due to the longer body.
 
  • Like
Reactions: xxflyingturtlexx, TheBigCountry and PrecisionRifleGuy
#16,143
Huskydriver said:
I heard he's living with some poors terminus trying to get aw mags to actually work lol... Imagine going from running aw mags flawlessly... To well... Not 🤣 sorry @Krob95 you are welcome back any time homie
Click to expand...
I actually got 6.5cm to feed flawlessly from AW’s in my terminus / manners TCS. And by me, I mean the head gunsmith at MHSA lol in my newest TCS, 308 feeds so far from AW’s with my impact.

I hope to rejoin the ai master race again. Ya boy just got married and got back from Italy though lol. I’ll give you a timeline you’re used to with AI. Expect Q3 next year but will actually be Q3 of 2026 (maybe).
 
  • Haha
  • Like
Reactions: 5280yotes, J-Ham and TheBigCountry
#16,144
Krob95 said:
I actually got 6.5cm to feed flawlessly from AW’s in my terminus / manners TCS. And by me, I mean the head gunsmith at MHSA lol in my newest TCS, 308 feeds so far from AW’s with my impact.

I hope to rejoin the ai master race again. Ya boy just got married and got back from Italy though lol. I’ll give you a timeline you’re used to with AI. Expect Q3 next year but will actually be Q3 of 2026 (maybe).
Click to expand...
Who are you again? And stay outta my country. Next time you visit, you need to ask my permission.

I’ll tax you for that Terminus and we’ll call it good for now ♠️♠️🤌🤌
 
  • Haha
Reactions: carbonbased and Krob95
#16,150
TylerN said:
My experience with HRD kits and AX mags:

6 Dasher will occasionally nose dive on the last round if I run the action slow. If I run the bolt fast it works 100%.

22BRA fireforming and formed cases will 100% nosedive on the last round. However if I run the bolt as fast as possible then they work 100%.

I dunno why but I find reliability with bolt speed. And I'm guessing Dasher does better than BR/BRA due to the longer body.
Click to expand...
I want to try 6BR in my at-x next summer
 
You must log in or register to reply here.

Similar threads

austino775
The AI Arctic Warfare Picture Thread
Replies
47
Views
2K
Potatosalad
P
5
Firearms SOLD Accuracy International AT 6.5 Creedmoor
Replies
6
Views
1K
556mtjones
5
5
Firearms 308 GAP700, Accuracy International Chassis
Replies
12
Views
2K
556mtjones
5
Mj30wilson900
Accuracy international at-x .22 creed
Replies
5
Views
716
Patrice Dauffer
P
MikeinNC
SOLD Accuracy International 6.5mm Creedmoor 20” AXSR barrel, 1-8” twist, 5/8x24, Elite Sand, New $600
Replies
1
Views
192
MikeinNC
MikeinNC
Top Bottom
Back
Home
Forums
Merch
Alerts