Nice setup, and yes it’s a bit bigger than the XII . I had one and would say this is right on par.
That's a sexy AT you have there. Makes me want to get a set of green skins now lol.
Is it sacrilege if it's rustoleum? Lol.
I’m still trying find an old school square back folder. Was to stupid to understand folders back then
This is just perfect…tan would be even better
Don’t let anyone fools you that Steiner is tits on an AI
Oh yeah, I'm good with the steiner. It's the GLX on the AX that makes me question my sanity!
This is the way
Attachments
I have an All Black AXMC Kit: 338LP, 300NM, 308, 6.5CM. Wondering if any of y'all have Rattled caned yours. If so post some pictures please.
Wait y’all take your guns out of the safe after you bought them?
What if you aren’t afraid to paint but you possess the one true color. The elite of the elite. The color to end all colour. The sands of greatness. The. Elite. Sand.
???
I expected to paint mine the day I got it. Had the paint ready to go. …until I laid me gaze upon the glorious sands. The unmatched beauty hypnotized me. The cans rattled out of my hand. Euphoria washed over my quivering soul. Knowing that it’s embrace would keep me warm throughout the winter, as I ran my fingers along the supple crest of the lines.
*Ahem*
Umm where was I? Oh yea. So umm yea painting is the way to to if you don’t have ES.
I have an Elite Sand and two Sage Greens. I love both colors, wouldn’t dream of defiling them. But Black…? Yeah, I probably would.
Why not elite sand and some sage?
Sounds a lot like you dropped some acid and thought you were looking at Sage Green. Only explanation I can think of.
Haven’t seen that much variation in color since I eyed a scar
The only thing your ES blends into is the empty spot left in your heart from getting the wrong color in the first place
Roses are red
AI’s are green
You may be offended
But my conscience is clean
YOU DON’TKNOW MEEEEEEEThe only thing your ES blends into is the empty spot left in your heart from getting the wrong color in the first place
Roses are red
AI’s are green
You may be offended
But my conscience is clean
Honestly it’s the best AXSR color.
The overall best color they ever put out was Sage Green. That’s a fact no sane person (AKA a “non-poor”)would ever argue.
But the AXSR is where we are now as a people. Mature competent adults in 2023 don’t stay satisfied with a short quad rail 14.5” pinned A2 flash hider with a FSB and fixed A2 carry handle with MAYBEEEEE a PEQ-2 and Gen 1 PVS-7Bs. Such is the passing of the torch when it comes to the title of the best…the most moist, succulent, glorious shade of glory.
It’s so fucking great that Toyota, AKA the AI of the truck world, also dedicated a new color of their vehicles to it. Lunar Rock IS a direct nod to Elite Sand. #Confirmed #TheCompanyThatSponsorsTrucksInEveryModernWarAcrossEveryContinentSupportsTHEColor
#MakeSandEliteNotWar
Pic Tax
#IHGRewardsElite
#RoomForActivities
#IYKYK
#Hashtag
Factory colors are for Ned Flanders to keep
In his safe.
This is the ideal color for real men who use their rifles :
In his safe.
This is the ideal color for real men who use their rifles :
Nope, you have that backwards. Only Poors would rattle can an AI. Kinda like curb feelers on a Cadillac.
Any option other than "preserving resale value" is 
Rattle can it if that's your style.
Get a custom Cerakote job if that's your jam.
Either way add your personal taste and make it yours. And if your happy with the factory color such as the delusional ES squad the that's Ok also. Just don't make your decisions about your gear so you can sell it to the next owner .
Rattle can it if that's your style.
Get a custom Cerakote job if that's your jam.
Either way add your personal taste and make it yours. And if your happy with the factory color such as the delusional ES squad the that's Ok also
. Just don't make your decisions about your gear so you can sell it to the next owner .
Any option other than "preserving resale value" is
Rattle can it if that's your style.
Get a custom Cerakote job if that's your jam.
Either way add your personal taste and make it yours. And if your happy with the factory color such as the delusional ES squad the that's Ok also
People only care about resale of AIs because they didn't buy it in Elite Sand
Elite Sand is for life, not just for Christmas
Elite Sand is for life, not just for Christmas
Dudes who paint their rifles but leave scopes are worst than the ones who don't paint theirs at all.
Negative. People who sue their rifles know they will get scratch’s and scuffs and a fresh paint job takes 5 minutes.
Cerakote your sending it out. Have someone who may or may not reassemble corrextly. Etc
#betterthanany”pro”job
Im gonna be the odd one out and say i like my all black axsr. You really dont see many around that arent tan, green or cement
Or you could be smart about it and just send the parts that need to be cerakoted and disassemble and assemble it yourself…
ES appeals to shooters with a fascination for concrete, velcro sneakers, and heavy bench presses
Same. I love my all black AXMC but I did add a green thumbhole AT recently. I love seeing all the rattle can paint jobs though. They do look nice but just not my rifle. And nope, I am not selling any of my AI. They will stay with me until death. Favorite guns I own.
Meh. Was calculating drops. 1.9 mil was correct for center x. Long range looks closer to 1.4
Gotta say thank you gents for the Christmas present this thread has been the last 12 hours 
..... I have appreciated the chuckles....
Mandatory ai field pic....
#checkthedope
#rainwashedoffmykrylon
#palebrownwinsthefight
#hifromdirtymikentheboys
#merrychristmasyafilthyanimals
..... I have appreciated the chuckles....Mandatory ai field pic....
#checkthedope
#rainwashedoffmykrylon
#palebrownwinsthefight
#hifromdirtymikentheboys
#merrychristmasyafilthyanimals
Been lurking for years...first post cuz i'm about to buy an Ai.
I've decided my first precision LR rifle (used a very lightweight 7mm rem mag for hunting in past) will be an Ai.
What i've gathered from reading all 329 pages of this thread:
Learning long range on 338 lapua magnum is great due to inexpensive cost of ammo and how it helps you learn to deal with recoil via maintaining sight picture.
ZCO good and Nightforce is poor now? - I just bought a pct3 because the reticle looked cool for ranging since I am now too poor to buy a proper LRF. Now that i've spent $4k on an optic i probably need to buy a rifle.
AXSR - just buy it if you ever want to shoot .338 or other long action and save money from buying multiple rifles.
Got a few questions before I pull the trigger on an AXSR that didn't seem apparent from reading this thread.
1. Is the AXSR stock firing pin (Large or small or whatever it is) ok to use with .338 LM, .308, and 6.5CM? I plan to shoot primarily manbun and .308, end the day with some .338 probably. Don't want to pierce primers and it seems like people have been having that issue with 6.5 specifically? Or was that just with the older MC?
2. Is the AXSR too big to fire out of various firing positions like kneeling, siting, standing? It looks really big and awkward in some pics and then manageable in others. I plan to use this for all shooting that I will do, including plinking, hunting (18.5 proof barrel), and potentially competition like PRS which I am learning about.
3. is the AXSR being replaced at shot show and will it be impossible to find conversion parts as a result?
4. are .308 bolts actually hard to get? They look in stock on mile high? as of a week ago people are saying there are extremely long waits on these?
When I get it all set up i'll post a pic in here for absolution for ruining a pic thread with a wall of text.
I've decided my first precision LR rifle (used a very lightweight 7mm rem mag for hunting in past) will be an Ai.
What i've gathered from reading all 329 pages of this thread:
Learning long range on 338 lapua magnum is great due to inexpensive cost of ammo and how it helps you learn to deal with recoil via maintaining sight picture.
ZCO good and Nightforce is poor now? - I just bought a pct3 because the reticle looked cool for ranging since I am now too poor to buy a proper LRF. Now that i've spent $4k on an optic i probably need to buy a rifle.
AXSR - just buy it if you ever want to shoot .338 or other long action and save money from buying multiple rifles.
Got a few questions before I pull the trigger on an AXSR that didn't seem apparent from reading this thread.
1. Is the AXSR stock firing pin (Large or small or whatever it is) ok to use with .338 LM, .308, and 6.5CM? I plan to shoot primarily manbun and .308, end the day with some .338 probably. Don't want to pierce primers and it seems like people have been having that issue with 6.5 specifically? Or was that just with the older MC?
2. Is the AXSR too big to fire out of various firing positions like kneeling, siting, standing? It looks really big and awkward in some pics and then manageable in others. I plan to use this for all shooting that I will do, including plinking, hunting (18.5 proof barrel), and potentially competition like PRS which I am learning about.
3. is the AXSR being replaced at shot show and will it be impossible to find conversion parts as a result?
4. are .308 bolts actually hard to get? They look in stock on mile high? as of a week ago people are saying there are extremely long waits on these?
When I get it all set up i'll post a pic in here for absolution for ruining a pic thread with a wall of text.
Last edited:
Go get a used AT outs the Px. Plenty to choose from
Stay with a SA caliber for now. 308 or 6.5 creed
AIs are addicting and the tend to multiply in the safe. One becomes two, two become four, etc etc
