Accuracy International Picture Thread

[RS14]

You got to see the shit they eat today.... candy, junk... shakes, with who the fuck knows what's in them

The barrel has that caramel look to it.. candy

yeah you got a point. I found out my 12yr old ate three donuts and washed it down with chocolate milk the other night while I was at work. Lol

 

[Huskydriver]

Yea, might end up with one of those for a 223 action I have sitting in the safe.

It's for an AI action

 

[Hennig]

Jesus Christ lads. Bought an AX308, shot it twice, pulled it apart last night for the AO/V .... and then bought a cheap AT today. What is wrong with me?

 

[BuLLet]

Nothing, as long as you avoided the purple paint!

Jesus Christ lads. Bought an AX308, shot it twice, pulled it apart last night for the AO/V .... and then bought a cheap AT today. What is wrong with me?

 

[M8541Reaper]

@Huskydriver

And my range….if we really want to get peanut butter and jealous
View attachment 7898028View attachment 7898029View attachment 7898030

 

[Hennig]

Nothing, as long as you avoided the purple paint!

Now I have been known to do some pretty loud cerakote jobs…

Nah ill slap these skins onto it…. Assuming they fit anyway.

 

[aishooternz]

Fun morning 22-250ing rabbits.

 

[Huskydriver]

Sunsets AIs and Flippy flops n bedrocks are how me and the spotter #1 roll...

 

[Krob95]

Little range practice before the match tomorrow. Blessed with a nice sun set as I was leaving. 8pm sun downs are nice

 

[Huskydriver]

Now I have been known to do some pretty loud cerakote jobs…

Nah ill slap these skins onto it…. Assuming they fit anyway.

View attachment 7898122

What action is that?

 

[Krob95]

Looks like an ultimatum I think.


Edit: googled the ultimatum. It is indeed that action.

 

[Hennig]

Looks like an ultimatum I think.


Edit: googled the ultimatum. It is indeed that action.

Yep, Deadline Gen1.

 

[J-Ham]

View attachment 7898814

Holy smokes, Felipe!

 

[NoLegs24]

Playing around with different variations of the MBR from Sawtooth Rifles. Pretty damn good

 

[wizardpc]

View attachment 7898814

I thought my MC was heavy with a pvs27

 

[Hennig]

Tried to find some last night. Long gone.

Found your pic in my googling.

 

[Heffo]

Jesus Christ lads. Bought an AX308, shot it twice, pulled it apart last night for the AO/V .... and then bought a cheap AT today. What is wrong with me?

Did you get that one for $5300 on used guns? Gotta be bloody quick!

 

[Hennig]

Did you get that one for $5300 on used guns? Gotta be bloody quick!

 

[EOD100]

Just picked this rare beast up

 

[EOD100]

This is an early L96A1 trigger, as used on the AW, which was used as a training aid, fitted with a clear plastic front cover to show the workings.

 

[Silvan]

Just picked this rare beast up

Made in 1996…ATL…What is it?

 

[EOD100]

It's a Left handed, AI Coopermatch Palmamaster action.

They were designated AT before the current AT rifles, with the L designating left handed.

They are single shot target actions, with the two position AE style bolt shroud safety

They are rare actions in RH, but LH are even harder to find.

 

[hafejd30]

 

[SkyScrapin]

Going 12” on the 6.5 barrel.

 

[Huskydriver]

Going 12” on the 6.5 barrel.

View attachment 7900579

Is that flush with the handguard?

 

[SkyScrapin]

Is that flush with the handguard?

Should be close with suppressor cover

 

[Huskydriver]

Should be close with suppressor cover

How much flash do you get with the can on and that short of a barrel?

 

[SkyScrapin]

How much flash do you get with the can on and that short of a barrel?

Not sure yet. Will know in a couple weeks.

 

[Ordnance Locker]

 

[ballisticdaddy]

Finally picked up the Nomad-Ti from my SOT today and had to send a few as soon as I got home!

 

[Hennig]

Anyone know the reason for the flushcup location change between AX rifles and AXAICS chassis? I pillaged a folding AXAICS buttstock to convert my fixed AX and noticed the difference. If there is any reason to use the AX specific buttstock ill swap the hunge itself, but cbf if its no benefit.

 

[RS14]

Anyone know the reason for the flushcup location change between AX rifles and AXAICS chassis? I pillaged a folding AXAICS buttstock to convert my fixed AX and noticed the difference. If there is any reason to use the AX specific buttstock ill swap the hunge itself, but cbf if its no benefit.

View attachment 7902261

I believe it’s due to some issues with the cup at the top.

If the cheek riser is to low it can make it where you can’t remove/attach the flush cup. It’s never been a big deal to me. However I have had that problem. Just moved the cheek piece for the time being and then move it back

 

[FUNCTIONAL]

Anyone know the reason for the flushcup location change between AX rifles and AXAICS chassis? I pillaged a folding AXAICS buttstock to convert my fixed AX and noticed the difference. If there is any reason to use the AX specific buttstock ill swap the hunge itself, but cbf if its no benefit.

View attachment 7902261

My guess is because a 700 bolt sits in a different position than a ai. I remember my axaics barely cleared when stock was folded. It would never clear with the cup like you ATX is.

 

[RS14]

My guess is because a 700 bolt sits in a different position than a ai. I remember my axaics barely cleared when stock was folded. It would never clear with the cup like you ATX is.

Also very possible reasoning.

I’m sure someone in here knows exactly though.

 

[VSP968]

Anyone know the reason for the flushcup location change between AX rifles and AXAICS chassis? I pillaged a folding AXAICS buttstock to convert my fixed AX and noticed the difference. If there is any reason to use the AX specific buttstock ill swap the hunge itself, but cbf if its no benefit.

View attachment 7902261

The R700 action sits lower in the chassis than the AI action does. Here’s an AX butt (meant for converting AI AT rifles) on AT AICS. Note little/no bolt clearance with R700 bolt knob when folded. The bolt is not completely closed in this picture. This was a failed experiment as far as I was concerned.

If you don’t like the flush cup location, just use the hinge.

Edited to add: here’s an R700 in an AX AICS. Note different sized opening for bolt clearance. Same bolt knob, different barreled action; bolt closed.

 

[Hennig]

Yep, when I actually looked tonight, there are a few more differences between the buttstocks - so I put the real AX buttstock onto the hinge so everything is as it should be.

 

[Hennig]

And picked up the buttstock when it was still red hot from debonding, dropped it, and put a nice dent on the hinge. Oh well, it was gonna get banged up eventually.

 

[VSP968]

And picked up the buttstock when it was still red hot from debonding, dropped it, and put a nice dent on the hinge. Oh well, it was gonna get banged up eventually.

Here’s a R/H AX hinge, although it’s green:

SOLD - AIAT Buttstock Hinge Set

Got a couple builds going. Accumulated some extra parts from AIAT’s. SOLD**Sage Green AX hinge. Folds to right. I’m a lefty, replaced this with left side folding. Never mounted on rifle. Removed buttstock. Touched up area with Sage Green paint where buttstock was removed. Pictured. Selling it...

www.snipershide.com

 

[Hennig]

Ahh Im precious, but not “replace it coz I dinged it” precious hah. Thank you though

 

[CoriolisEffect]

Welcome me home, boys (and girls). I finally made it on the A(I)-team!

Fun fact about this journey, I bought the thumbhole conversion from Mile High all the way back in August of 2020.

 

[Huskydriver]

View attachment 7902693Welcome me home, boys (and girls). I finally made it on the A-team!

Fun fact about this journey, I bought the thumbhole conversion from Mile High all the way back in August of 2020.

Cool now rip it out of there and get it in a ao chassis

 

[CoriolisEffect]

Cool now rip it out of their and get it in a ao chassis

Yea, that’s never going to happen

 

[Huskydriver]

Yea, that’s never going to happen

Why you don't like perfection ?

 

[J-Ham]

Yea, that’s never going to happen

You're back off the team again!

 

[FUNCTIONAL]

Yea, that’s never going to happen

Just as God intended. Thumbhole is the 3rd best hole.

 

[Huskydriver]

Guys in the ai thread waiting to see scope he's going to put on it....

 

[matleez]

I'm going to find an AT next year to rip apart. Or maybe the atx will be available and not have small issues

 

[CoriolisEffect]

Why you don't like perfection ?

You're back off the team again!

I’ll be putting Sam’s thumb rest on it, does that get me partial credit?

 

[CoriolisEffect]

Guys in the ai thread waiting to see scope he's going to put on it....

View attachment 7902725

It’s getting a ZCO, just haven’t decided which one yet.

 

[BuLLet]

Tasco?

Guys in the ai thread waiting to see scope he's going to put on it....

View attachment 7902725