I couldn't resist Mile High's sale. Now the wait begins for the AXMC in 300PRC...
-
Having trouble using the site?
Contact support
I couldn't resist Mile High's sale. Now the wait begins for the AXMC in 300PRC...
You will NOT be disappointed. Absolutely lives up to the hype.
I have happy tears from 2 areas for the gun and the fact that you are one of the few putting the gun correctly into a case.
I couldn't resist Mile High's sale. Now the wait begins for the AXMC in 300PRC...
Love my 338 ultra Sr
Sorry lolTalking suppressors homie not chamberings
Alert brought me to yours lol
Plus I’m in NY so my mind is never on suppressors
Looking to get into a large magnum suppressor. Gen2 338SR or a Magnus SR. Don't ever planning on shooting 338LM, and not a huge fan of it being 11" so that's why I'm considering the Magnus.
I really like it so far, but I’ve only had it about a week. Maybe 200 rounds with it.
I like where the level is and that you can move it.
One unexpected thing I really like is that the gap in the rings aligns perfectly with the hash marks on the turret. Has made it easier/faster for me to see exactly where I am on the tightly spaced DT turret on the S&B. For that reason its definitely my favorite mount that I’ve had that SB in.
The magnus is where it's at if you're not planning on shooting 338. I have both the 338SR gen 1 and MagnusSR. On 300NM AIs side by side I can not tell the difference.. Behind the rifles, I can't tell a difference on recoil impusle or noise. They feel identical. Shooting the same handloads, exact same rifles, except the suppressors.
I have not been behind the gen2 338SR next to these two I have, for what it's worth.
Size really isn't all that different when it's on the end of a MC or SR. If there is any chance you will ever shoot anything 338, get the Gen2 338SR. If not, you won't regret the Magnus one bit.
Attachments
All I can say about the gen 2 338SR is holy shit. I have it on my 338/300wsm, it’s insanely quiet. I also put it on my 300wsm. It blows my gen 2 ultra 9 out of the water.
It is big, but damn does it suppress
There are some good choices out there: the 338SR, Magnus and the Hekate were all in the box. In the end, the MHS sale on the the Gen 1 338SR pushed me over the year-long edge I've been on for the 300PRC. I'm also on a square range and carrying the rifle all of 25yds so, the size of the 338SR doesn't affect my situation.
New 22GT barrel is done for my ATX 
How can I keep scratch's off the barrel? I have the full enclosed forend... /s
How can I keep scratch's off the barrel? I have the full enclosed forend... /s
Last edited:
I’m all for saving a buck. I was super impressed when I felt the weight. You see it and think, it’s gonna be heavy.
Ya got to stick it in very carefully
Still scratch the piss out of it
Then remember you cant see the scratches cause you were smart and got fully enclosed forend
Still scratch the piss out of it
Then remember you cant see the scratches cause you were smart and got fully enclosed forend
Last edited:
You f’ing TIGER, you. Rawroor!New 22GT barrel is done for my ATX
How can I keep scratch's off the barrel? I have the full enclosed forend...
View attachment 8069195
Maybe wrap some packing paper or plastic around barrel. Place rifle vertical. Lower that sumbitch down. Screw in stuff. Leave paper on for the base of your ghillie / ’nam-Charlie-hunter look.
? Ok obv remove paper.
It's a joke, poking fun at some guy that was concerned with scratching his barrel 
if your being seriousNew 22GT barrel is done for my ATX
How can I keep scratch's off the barrel? I have the full enclosed forend...
View attachment 8069195
i use sports/ hockey grip tape
still soft to the touch and comes off pretty easy
usually ill spray paint it up a little and when i get bored ill pull the tape and play again
I have a Sandman-L and a SOCOM 7.62RC, both 300PRC rated, but I just didn't feel comfortable shooting either long term in the 300. The Sandman is incredible on the AT-X in 6BR (quiet and no POI shift) and the SOCOM will reside on the .260 gas gun.
You could always give it what it deserves and wrap a “his and his” condom on itIt's a joke, poking fun at some guy that was concerned with scratching his barrel
New 22GT barrel is done for my ATX
How can I keep scratch's off the barrel? I have the full enclosed forend...
View attachment 8069195
Could always clear coat it
The nomad L has alot more volume. I dont think id run a sandman long-term on a big caliber either
That's the reason I'm looking for a bigger suppressor. I had the Silencerco Hybrid on the 300NM, but it can not sustain longer strings of fire. I launched the core down range to never be seen again. Silencerco warrantied it since I still had the tube. Also have a 30P-1 and Ultra 9 and still don't feel safe shooting the 300NM on those cans. I had a friend launch a Ultra 9 twice down range in his 300WM. Also warrantied. I am pretty sure it's rate of fire of which we both shoot is what contributed to the warranty claims lol
For all us guys with the old, 3 lug, short actions, and way to get replacement bodies or firing pins? Sending mine off to finally have LRI work some magic.
This thread has helped me become thousands of dollars poorer .. here is my contribution
AT with bartlein 6.5CM barrel hopefully many more pictures to come
AT with bartlein 6.5CM barrel hopefully many more pictures to come
Anyone know of any large AI schematic drawings that you could get printed onto mouse mats etc?
Check Sporting Services UK or Mile High. I have emailed them in the past for parts not on the site and have always gotten a response.
No disrespect for the old school wood and steel, but it looks like you're doing alright for yourself without this thread.
Anyone have a line on one of the ASR rifle cases (ECS loadmaster weapons case) or know someone who may sell theirs?
Or, does anyone know the model number of the ECS case?
Or, does anyone know the model number of the ECS case?
Last edited:
Waiting for lri on the bolt, haven't set lop/ocular yet. Mockup of the AX/S5 since all you guys like to argue about ZCO, NF, TT, & S&B.
Just got my teaser pic from Primal Finish on my AX…
The before wasn’t quite this sexy
The grip is just for mock up
Before…
After…
The before wasn’t quite this sexy
The grip is just for mock up
Before…
After…
I looked at the top pic before reading and thought, “Gdamn California ruined his AIAX
”
He didn’t go for the neon themed cock-n-balls I initially requested, so we settled on burnt bronze based snake skin.I looked at the top pic before reading and thought, “Gdamn California ruined his AIAX
Daniel come on man, don’t be gay, put your cock and balls all over my gun please
I was talking about the lack of grip. First pic looks like those Cali-neutered “featureless” AR15 contraptions.
Paint job is fine man. Although I’d kill to see a cock ‘n balls AIAX, if only to give it to @Buddly or something.
Closet pic I found, thematically, to ze balls und ze cack.
Last edited:
For a few hundo, you can pay me and I'll do a dick camo on my ATX
Dude, you know you’d do that for me for free.For a few hundo, you can pay me and I'll do a dick camo on my ATX
If not, I’ll throw in a can of Jheri curl bro
(my emph)You drive a hard bargain
I want to joke further, but I also don’t want to go (further?) down Gay Porn Theater Boulevard either…dagnabbit a man’s got ‘ta know his limits
Pretty sure this is how we all look after a gun related purchase
This shit is fabulous!!!!
Speaking of muzzle brakes, anyone know where to pick up a single port AI no suppressor thread brake? The old school type?
Similar threads
