It involved siamese twin nuns
️, Viktor Orbán 
, one coconut 
, ice-making schemes on the Mosquito Coast 
, 37DD tits 
, a tri-hull catamaran 
️, and a tiny pair of men’s gold lamé thongs 
. Other than that I don’t know.
-
Having trouble using the site?
Contact support
️, Viktor Orbán , one coconut , ice-making schemes on the Mosquito Coast , 37DD tits , a tri-hull catamaran ️, and a tiny pair of men’s gold lamé thongs . Other than that I don’t know.
You know how it goes when your husband holds the purse strings….
The pursuit of doing halfway decent in PRS matches lmao
Better than I expected. Started at the middle of b class and took champion of b class lol
?
I haven't had any luck with this on my bolt guns. Brass keeps bouncing back into the chamber.
I think you need something that'll keep the entrance of the bag full open.
I didn't have luck with it either. I couldn't mount it far enough back so brass hits the back edge and bounces back in the gun.
What's going on here my AX mag won't fit in my AT I thought they were all the same? Only have this one mag since my AT didn't come with one so I can't compare them.
Not 100% certain, but I think it should be an AW mag. Couple threads out there on it, I think.
AX mags, with the lip, do not fit in a AT. They require AW mags.
Last edited:
The most elitist of sand crushing kegels and dropping decibels.
I need to stop being a poor and put a TBAC on my STAR card. Didn’t feel like carrying around the 1.6 pound AAC/SF hybrid boomer can of mine.
Oh I was hoping nobody would notice
After a great purge, counseling from members here and an insufferable wait - here is my first proper AI.
I can definitely feel the difference between this and the rifles I've owned before. I read one time, maybe even here, "locks up like a bank vault" and that's definitely how it feels.
Still figuring out a more permanent scope but for the near future here's what I'm working with. First range trip is this upcoming Monday.
I can definitely feel the difference between this and the rifles I've owned before. I read one time, maybe even here, "locks up like a bank vault" and that's definitely how it feels.
Still figuring out a more permanent scope but for the near future here's what I'm working with. First range trip is this upcoming Monday.
Almost lookin a wee bit sage like here.
#ElististOfSand
#TheOneTrueTruth
I took my 5 axis machine (dremel) with the cutoff wheel attachment and cut the center of the bow then with a hammer bang them flat. Been running those mags for 5+years now without issue.
The Lord speaketh through thy photograph, my son. Beware of the the unholy
that may await!#VerdantAsGod’sGreenEarth
#SandCannotBeEliteForItIsUnderfoot
Last edited:
The Lord speaketh through thy photograph, my son. Beware of the the unholy
View attachment 8293635
#VerdantAsGod’sGreenEarth
#SandCannotBeEliteForItIsUnderfoot
With an moa scope....surely you jest sir.....
In case anyone is interested in a the NF limited run:
Nightforce SOCOM Scope Clones
Nightforce SOCOM Scope Clones are available at EuroOptic!
Anyone want to try to buy out all 300 then gloat about it on SH and see how that goes?Nightforce SOCOM Scope Clones
Nightforce SOCOM Scope Clones are available at EuroOptic!www.eurooptic.com
It’s their Ultra Mount. Pretty good mount with a solid RTZ. Bitch ain’t going anywhere with 100in/lb on the crossbolts lol
Also, who the F would pay $6k for something with a T3 reticle??? 
(and that’s coming from a NF whore)
(and that’s coming from a NF whore)Those more advanced, refined persons who did this longer than E4 retirementAlso, who the F would pay $6k for something with a T3 reticle???
AI owners:
“Man I wish they made a model that wasn’t bonded”
- enters ATX and AXSR
NF owners:
“What makes that Mil spec model so much better and more expensive?”
NF:
“Some parts are bonded”
NF owners:
“Man I wish they made a model that wasn’t bonded”
- enters ATX and AXSR
NF owners:
“What makes that Mil spec model so much better and more expensive?”
NF:
“Some parts are bonded”
NF owners:
Similar threads
