Accuracy International Picture Thread

#251
HarryHaD said:
Anybody else have problem with AX pistol grip? I was desperate, for my hand is extremely uncomfortable... And I have Ergo grips on other rifles... Sooo, I had to cut the AI grip and replace it by the same Ergo grip, as I have on other rifle. Now I am happy ;)
Click to expand...

Would you put up a thread about how you did it, with pictures of the way you mount the grip? I've found a satisfactory position with mine, but am always interested in chopping on $7,000 rifles.
 
#253
RoterJager said:
Anyone running a Dasher in their AX/AT's? Do you have to modify the mags and do you have any feeding or extracting issues?
Click to expand...

Talk to Josh at PVA if you really want to run one. Supposedly the new ARC mags will work, but it's the extraction of fired cases that are the problem. The cases are so small that they tend to flip around 180° in the chamber rather than ejecting out.
 
#255
I hear ya on the H4350. In that case, if you're shooting it out of the AX then 6x47L seems like the clear choice. No fireforming, no additional mags or adapters needed, great brass, and a bit more velocity.
 
#256
The ARC mags didn't work on my AX. One guy had a dasher made for his AT and use the AW mags with the mods that Josh at PVA did for him. I guess he started having problems feeding and what not so he had to dump it. Good thing I followed up on him, as I was going to have Josh chamber a 6BR. I just went with the 6x47 instead.

You're better off shooting a 6x47, 6CM or 6XC in the AX/AT. You can always tune down the load to make it feel like a dasher lol.
 
#257
HarryHaD said:
Anybody else have problem with AX pistol grip? I was desperate, for my hand is extremely uncomfortable... And I have Ergo grips on other rifles... Sooo, I had to cut the AI grip and replace it by the same Ergo grip, as I have on other rifle. Now I am happy ;)
Click to expand...

The size and shape of the AI pistol grip is definitely not a good fit for my hands. Haven't modified mine yet, though.
 
#258
NoLegs24 said:
The ARC mags didn't work on my AX. One guy had a dasher made for his AT and use the AW mags with the mods that Josh at PVA did for him. I guess he started having problems feeding and what not so he had to dump it. Good thing I followed up on him, as I was going to have Josh chamber a 6BR. I just went with the 6x47 instead.

You're better off shooting a 6x47, 6CM or 6XC in the AX/AT. You can always tune down the load to make it feel like a dasher lol.
Click to expand...

I ended up ordering a 6xc barrel.
 
#261
This is my new baby. A.I. AT in tan. Running an Accurate Ordnance 26" 6.5 CM barrel, Atlas Bi-pod, S&B PMII 5-25. The can is a Rugged Surge. I absolutely love this rifle. It's easily THE most accurate rifle I have ever shot. So far, I've stretched it out to 1250 with Hornady 140 ELD-M.
 

Attachments

  • photo70784.png
    photo70784.png
    8 KB · Views: 203
#262
This thing just keeps evolving.
Just back from the Cerakoter, colour is 'as close to AI Sage Green as you can get without actually getting the official recipe'
Union Jack is in Burnt Bronze.
Muzzle brake is prototype Gemtech QM Lantac Dragon (Ser No. 001)


 

Attachments

  • photo71767.jpg
    photo71767.jpg
    46.2 KB · Views: 115
#263
Gundoc said:
This thing just keeps evolving.
Just back from the Cerakoter, colour is 'as close to AI Sage Green as you can get without actually getting the official recipe'
Union Jack is in Burnt Bronze.
Muzzle brake is prototype Gemtech QM Lantac Dragon (Ser No. 001)

Click to expand...

That looks amazing. I keep on thinking of doing mine up but am not sure if I have the balls.
 
#265
Gundoc said:
This thing just keeps evolving.
Just back from the Cerakoter, colour is 'as close to AI Sage Green as you can get without actually getting the official recipe'
Union Jack is in Burnt Bronze.
Muzzle brake is prototype Gemtech QM Lantac Dragon (Ser No. 001)

Click to expand...

Bravo!!!
 
#273
Finally got my axmc all finished up and up to get it sighted it. I'm still amazed when you go to sight in a rifle and it moves the poi right where it's suppose to.

So just sighted in with factory 6.5CM Hornady 147gr eld-m. Then added a silencerco omega and it moved the poi up .5".

first target is 3 rounds without the can. Second is 5rounds with the can. No adjustments made.
 

Attachments

  • photo73211.jpg
    photo73211.jpg
    71 KB · Views: 89
  • photo73212.jpg
    photo73212.jpg
    69.2 KB · Views: 85
#279
jbuck88 said:
Finally got my axmc all finished up and up to get it sighted it. I'm still amazed when you go to sight in a rifle and it moves the poi right where it's suppose to.

So just sighted in with factory 6.5CM Hornady 147gr eld-m. Then added a silencerco omega and it moved the poi up .5".

first target is 3 rounds without the can. Second is 5rounds with the can. No adjustments made.
Click to expand...


Looks very nice. Your groups look great. These rifles are crazy accurate. For an out of the box rifle, shooting factory ammo, I've never seen anything so consistent. They are AWSOME!!
 
#280
I have always heard these rifles were incredible and lusted over picture after picture. I've never been able to handle one and I couldn't appreciate the fit and form until I received one today. I bought it from LRShooter101 and it's a 14 AT in like new condition and what a trigger. Unfortunately, it was raining and by the time I got home with it and adjusted it to my liking I was losing the light but managed to take a scope off my varmint rifle and put two shots in one hole! God I like this rifle it's easy to shoot and hit with. Feels like a freshly tailored suit and Just needs a few more tweaks. Right :)

IMG_3579-002-XL.jpg



 
Last edited:
#284
Hondo1 said:
What case is everyone using to carry their AIAX in,in its broken down form? I can't bring myself to shell out the cash for the AI brand case.
Click to expand...

Armageddon Gear modified their M2010 case for me for my AT, so that I could fit a spare barrel and suppressor (apparently I was talking to the owner on the phone and didn't even know it.) They didn't charge me extra.


http://www.armageddongear.com/M2010-Precision-Rifle-Case-USGI
 
#285
Pelican™ Storm iM3100 Case With Foam: $221.04

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/img.pelican.com\/img\/products\/storm\/iM3100\/pelican-rifle-shotgun-ammo-gun-hard-case.jpg"}[/IMG2]

pelican-storm-long-rifle-ar15-hard-case.jpg
 
Last edited:
#292
phlegm said:
Badfinger said:
Nice gun Andy, what case is that?

https://www.amazon.com/Plano-Weather...68VZVK3EAYQXWV

It's a decent little case, if you're not going too be rough with it. It's not deep enough for me to trust it beyond general transport with my AI.
Click to expand...

Almost, :) this is the actual case:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The quality is definitely less than Pelican. I bought because I wanted a short and deep case to throw in the back of my SUV. It's a little easier to manage than my soft case. Plus I got a good deal on it through warehouse deals - $60.46 shipped.
Click to expand...
 
You must log in or register to reply here.

Similar threads

Mj30wilson900
Accuracy international at-x .22 creed
Replies
4
Views
285
JR1200W3
JR1200W3
HKSniper11B
Accuracy International - Alternative Barrel Clamp Torque Specs?
Replies
39
Views
825
BurtG
BurtG
Mozak
SOLD Accuracy international AX Rifle Vision Chassis
Replies
4
Views
787
Mozak
Mozak
J
AI AXMC Magazine Compatibility
Replies
1
Views
312
CollarChoke
CollarChoke
DimDesertNights
Firearms Accuracy International AT (Final price drop)
Replies
14
Views
2K
DimDesertNights
DimDesertNights
Top Bottom
Back
Home
Forums
Merch
Alerts