Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The Proof 6.5x47L barrel is not disappointing me on the Tungsten AX. I’m getting about 2760fps out of Berger 140 Hybrids.
That first group was horrible because I was having trouble getting used to the terrible mirage. I also wasn’t overjoyed when I broke the trigger before I was ready for shot 3 of the last group, quadrupling the group size from a .140” to a .520”, but can’t really complain about anything.
@Scotch_egg It’s a 24”. That’s the only length Proof offers in the small tenon prefits for most calibers. I actually prefer the 24” compared to my old OTM Gradous barrel that was 26”. The 2” makes the 24” a lot more maneuverable, especially with the Ultra 9 hanging off the end. I’ve been extremely happy with the Proof barrel, it has shot great with every load I’ve tried in it (even without any load dev), seems to be on the fast side, and it balances the rifle almost the same as my 16” .308 barrel. It also looks sweet with the tungsten cerakote, which is at least worth something.
I have noticed that it deflects quite a lot. You can easily push it around inside the handguard, but it is extremely consistent in how it vibrates when shot. I expect it would likely be heavily effected if any force were applied to the barrel externally when you shot, but I haven’t actually experienced it.
@Basher My 16” .308 barrel is a factory AX barrel that was cut, so I think it is fairly close to a Medium Palma in contour, but am not 100% on that. I have no complaints about the length or contour, though I’m not using it in any comps or anything, and I also have the 24” 6.5 barrel as well if I was looking for velocity.
I also have Factory AX barrel cut to 18”. If you’re looking to save weight I’d think you’d still have a pretty good sized muzzle with a light Palma cut to 16-18”. I can take a picture of the 308 barrel side by side compared to the 24” MHSA 6.5cm barrel if you want even tho I can’t remember what that contour the 6.5 barrel is ?Thanks! I don’t seriously compete (not enough time or money), but local matches are fun. I’ve always just been in this sport/hobby to become a better long-range rifleman, not win matches (though if it happens, I won’t complain, haha).
I’ll see if anyone else chimes in, but I felt that medium Palma was the best overall conpromise, just wanted to see what others were using. Anyone with photos of their, I’d love to see them to see how they look (even if they’ve been posted already, or even just a mention of your post number so I can reference it). Thanks again!
@Covertnoob5 I could only find an old crappy scale lying around the house, but my AX (exactly as in the pic minus the Ultra 9) is reading about 15.5 lb, which seems about right. I was expecting somewhere between 15 and 20.
@Scotch_egg It’s a 24”. That’s the only length Proof offers in the small tenon prefits for most calibers. I actually prefer the 24” compared to my old OTM Gradous barrel that was 26”. The 2” makes the 24” a lot more maneuverable, especially with the Ultra 9 hanging off the end. I’ve been extremely happy with the Proof barrel, it has shot great with every load I’ve tried in it (even without any load dev), seems to be on the fast side, and it balances the rifle almost the same as my 16” .308 barrel. It also looks sweet with the tungsten cerakote, which is at least worth something.
I have noticed that it deflects quite a lot. You can easily push it around inside the handguard, but it is extremely consistent in how it vibrates when shot. I expect it would likely be heavily effected if any force were applied to the barrel externally when you shot, but I haven’t actually experienced it.
Nice! What model Spuhr mount is that? Scope clears that AWM perfectly.
SP-4601Nice! What model Spuhr mount is that? Scope clears that AWM perfectly.
Awesome picture, I’m patiently waiting for my TT to arrive for my AT as well... great looking setup.Finally got the TT mounted up. Weather is shit today, so obligatory picture until I can get her out Monday.
There are still a couple small things I need (throw lever, cheek piece, SAP 2 round holder), but this should be the final product.
View attachment 7035120
Awesome picture, I’m patiently waiting for my TT to arrive for my AT as well... great looking setup.
I’ve been running S&B 3-20 PM2 as Primary and NF ATACR as my secondary for the last 5 years. I’ve been wanting to drop .5mil holds for awhile and no reticle really called my name... That was until I laid eyes on the Gen 3 XR, I knew I couldn’t live without it, it was made for me ?I dont know what scope you are switching from but the aaaaaa-haaaaa moment is a lot like what I had with the ZP5. I got in late last night and looked it over, thinking this is a nice scope, well made, but is it justified by the cost? Then you look through it and immediately say yepppp.
Now to go AX buttstock or keep trying to get more time on AT buttstock that is the question???
I have the thumbhole skins but preferred the originals LOL. I like the the offset adjustability for my shoulder pocket, I’m having a few issues getting comfortable behind AIAT.Meh, I think if you switch to the AX buttstock might as well go with the AX. To me the AT doesn't look right without the thumbhole skins,
Okay I tried the pic again, showing up for you now?A picture would help. It should be perfectly round.
I have no idea what the thread pitch on the bolt handle it, but these are an option. They look identical.
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.www.mcmaster.com
Okay I tried the pic again, showing up for you now?
Saw you snag this in the EE, great purchase. I'm waiting on my optic and Spuhr mount in the mail....After running R700 actions in AI Chassis I was finally able to make the jump to an AIAX. I haven't taken it out yet but so far it's everything I thought it would be.
Decided to steal a scope off another rifle for the time being.
View attachment 7035343
Saw you snag this in the EE, great purchase. I'm waiting on my optic and Spuhr mount in the mail.... View attachment 7035525
Now to go AX buttstock or keep trying to get more time on AT buttstock that is the question???
I snagged another Razor Gen II, one of the new EBR-7C reticles. I got an insane deal on it. Possibly wanting to try one of the Minox ZP5 5-25 sometime.What optic did you settle on?
So it is factory but is it factory for an AW? While the bolt you posted looks like mine I'm pretty sure the one you posted is from a newer AT not an AW. Notice the 6 lugs, my AW has 3. Heres some images of actual AW bolts I found that point out what I mean by being fully round.Yeah I just had to click it. I thought you meant it was flat and tapered down to the handle.
That is indeed an original factory bolt knob you have.
View attachment 7035199
I'm inexperienced in these guns so I'll just take your word for it. I always just assumed the knobs were fully round so it looked a bit strange to me when I got it since it's my first AI. And it's kind of hard to tell in images since most are taken at angles that doesn't show where the flat part is but that image clears it up. Hey that's good news to me! One less part I need to find for the restoration. Just need a barrel and brake now.Yes, that is a newer bolt.
Not sure how else I can explain this - You have a factory bolt knob as intended to be shipped with that rifle. Same series of photos that you posted. 3-lug, see the flat. Mile High even stated the same.
View attachment 7035691
I'm inexperienced in these guns so I'll just take your word for it. I always just assumed the knobs were fully round so it looked a bit strange to me when I got it since it's my first AI. And it's kind of hard to tell in images since most are taken at angles that doesn't show where the flat part is but that image clears it up. Hey that's good news to me! One less part I need to find for the restoration. Just need a barrel and brake now.
Got the Minox ZP5 put on my AX and switched the AMG onto my 40-X JElrod Repeater Conversion. I’ve wanted a Minox for a couple of years, and was extremely happy with it shooting earlier today.