Accuracy International Picture Thread

[M8541Reaper]

@R.Walters
@Scott Seigmund

Can vets please get access to the LE axmc

Pleaaasssseeeeeeeeeeeeee?
We don’t even want it at a discount. Let LE have their discount or whatever. We just want the design.

Hell, my brother is LE and has no interest in shooting LR. Let me buy the one the inventory gods put aside for his boot ass.

 

[NoLegs24]

View attachment 7545774

@R.Walters
@Scott Seigmund

Can vets please get access to the LE axmc

Go lick some balls with the others crying for Mil discounts..... LOL

 

[NoLegs24]

It would be great if A419, or anyone for that matter, would just release one so we don’t have to drop $225 just to hack it into something that should cost $125.

Something is already in the works... just not with those guys...

 

[Huskydriver]

Go lick some balls with the others crying for Mil discounts..... LOL

Lol hey $20 is $20

I don't care about a discount just access to that model axmc haha

 

[hic28]

 

[Sniperwannabee]

Shot the 6BR with DOMINUS today, I’ll never shoot 6BR braked again.
View attachment 7543170
View attachment 7543171

where is that? private or public land... beautiful

 

[Sniperwannabee]

View attachment 7544320View attachment 7544319

Area419 Arcalock rail mod, cut in half. Lower profile than the RRS, wider and flatter than the factory plastic grip, more stable than nothing... So far, this is my pick of the bunch.

can you post links for those parts? cant find them?

 

[hic28]

can you post links for those parts? cant find them?

I would strongly advise you to wait a few days. You’ll be happy you did

 

[lethalsquirts]

Something is already in the works... just not with those guys...

I would strongly advise you to wait a few days. You’ll be happy you did

Now you got me all curious.

 

[blbennett1288]

where is that? private or public land... beautiful

Private club in Rockford, Alabama.

 

[Krob95]

Oh no. You’re gonna make me spend more money

 

[Sniperwannabee]

Private club in Rockford, Alabama.

Added to the list of possible retirement areas

 

[Sniperwannabee]

Oh no. You’re gonna make me spend more money

Can we get a pkg deal?

 

[96C]

can you post links for those parts? cant find them?

ARCALOCK Rail for AI AX

Over the years we have seen a lot of Accuracy International rifles at matches, and every time we’ve been annoyed watching shooters try to navigate the big plastic booger in front of the magwell. After ending up with a Pre-14 AX ourselves and immediately taking it apart (obviously) it was time to...

www.area419.com

I’m keen to see what @NoLegs24 is going on about.

 

[Sniperwannabee]

ARCALOCK Rail for AI AX

Over the years we have seen a lot of Accuracy International rifles at matches, and every time we’ve been annoyed watching shooters try to navigate the big plastic booger in front of the magwell. After ending up with a Pre-14 AX ourselves and immediately taking it apart (obviously) it was time to...

www.area419.com

I’m keen to see what @NoLegs24 is going on about.

Thank you, I’ll guess I’ll wait

 

[NoLegs24]

ARCALOCK Rail for AI AX

Over the years we have seen a lot of Accuracy International rifles at matches, and every time we’ve been annoyed watching shooters try to navigate the big plastic booger in front of the magwell. After ending up with a Pre-14 AX ourselves and immediately taking it apart (obviously) it was time to...

www.area419.com

I’m keen to see what @NoLegs24 is going on about.

Yeah, I’d get rid of that 419.... Or, that’s what a buddy did pretty much immediately after he grabbed one.

The midnight oil is burning... y’all will be pleased!

 

[M8541Reaper]

Lol hey $20 is $20

I don't care about a discount just access to that model axmc haha

Exactly.

 

[NoLegs24]

Anybody got an OEM AX/ AT trigger they don’t use anymore??

 

[Krob95]

I’ll trade you my OEM ax trigger for that comp trigger it’s even out of an elite sand AX so you know it’s the real deal

 

[NoLegs24]

I’ll trade you my OEM ax trigger for that comp trigger it’s even out of an elite sand AX so you know it’s the real deal

Everything that came with the rifle, I’m keeping. I’m not even going to shoot the 6.5CM barrel, still keeping it. #preproductionlife

 

[Heretoimproveforhunting]

Anybody got an OEM AX/ AT trigger they don’t use anymore??

View attachment 7546350

pm me your address.

 

[JB.IC]

anyone else’s quick-loc screw squeak when the loosen the screw? I torque mine to 45in-lbs but twice now when loosening it squeaks and damn near sounds like it’s stripping

 

[NoLegs24]

anyone else’s quick-loc screw squeak when the loosen the screw? I torque mine to 45in-lbs but twice now when loosening it squeaks and damn near sounds like it’s stripping

Use some lube or spit. That'll fix it for ya...

And aren't the specs 53in lbs with that rifle?

 

[JB.IC]

Use some lube or spit. That'll fix it for ya...

And aren't the specs 53in lbs with that rifle?

my user manual says 49in-lbs but my fix it stick is 45in-lbs

 

[BuLLet]

Mine never squeak, maybe a little lube might help. You can add it when the barrel is off. Not sure if it's the thing to do, but the torque value will change with it wet as well.

 

[Krob95]

53in lb is for the r700 chassis’s. Fix it sticks has a specific 49in lb limited for the AI

 

[BuLLet]

I do believe he's talking the screw for the quick change barrel.

53in lb is for the r700 chassis’s. Fix it sticks has a specific 49in lb limited for the AI

 

[Huskydriver]

Then there is people like me who run 60-65 inlbs lol..

 

[Krob95]

I do believe he's talking the screw for the quick change barrel.

Correct. 49in lb is for the quick loc screw for the barrel. The 53in lb that was mentioned by NoLegs is probably in reference to the AICS chassis that AI made for the R700’s since that’s what they had in the manual for those chassis’s. I’ve had a few and had to buy the specific limiter for the chassis too.

 

[JB.IC]

I threw some 5w-30 on the screw quick-loc screw and it fixed the issue

 

[Huskydriver]

I threw some 5w-30 on the screw quick-loc screw and it fixed the issue

Def wipe off the excess

 

[JB.IC]

Def wipe off the excess

Nah. I like my screws to be with a WAP

 

[NoLegs24]

Correct. 49in lb is for the quick loc screw for the barrel. The 53in lb that was mentioned by NoLegs is probably in reference to the AICS chassis that AI made for the R700’s since that’s what they had in the manual for those chassis’s. I’ve had a few and had to buy the specific limiter for the chassis too.I was saying 53inlbs as thats what the ASR manual says. Figured AXSR would be the same

I was talking in regards to what my ASR manual says. Which is 53in lbs. Thought the AXSR would be the same.

 

[Sniperwannabee]

What the..

 

[Krob95]

I was talking in regards to what my ASR manual says. Which is 53in lbs. Thought the AXSR would be the same.

I didn’t realize he had an AXSR/ASR. Thought he was talking about an AT/AX. My bad man

 

[hic28]

A solid 1.5 ooga doogas with the supplied 4mm hex does just fine

 

[Krob95]

For what ever reason, this AI AWM has been misgendered as a Remington? I almost bought it regardless to add another AI to the collection. Even comes with a real sniper scope. Probably mil dot, MOA turrets

 

[Dave62677]

This rifle might bring Remington back from bankruptcy

 

[Huskydriver]

View attachment 7547089View attachment 7547090


For what ever reason, this AI AWM has been misgendered as a Remington? I almost bought it regardless to add another AI to the collection. Even comes with a real sniper scope. Probably mil dot, MOA turrets

Remington might be getting sued again....

 

[hafejd30]

This rifle might bring Remington back from bankruptcy

The tolerances are probably better

 

[Dave62677]

Anyone dares to bang the butt stock to see the trigger go off?

 

[trophyhunter]

Anyone dares to bang the butt stock to see the trigger go off?

We test that all the time

on our rifles and random customers, right @Dthomas3523

 

[VargmatII]

Remington might be getting sued again....

LEGO will definitely not be too happy about this.

Im just surprised that there is something that resembles a rifle being sold under the Remington name at all.

 

[Dthomas3523]

We test that all the time

on our rifles and random customers, right @Dthomas3523

You throw one rifle across room that doesn’t belong to you........

 

[J-Ham]

I sure wish you'd elaborate @Dthomas3523, this sounds like a amazing story, haha!

 

[Newbie2020]

@Dthomas3523 is a highly effective product failure tester.......

 

[Newbie2020]

I think he likes it...

 

[Dthomas3523]

You buy it, I’ll break it.

 

[J-Ham]

Can't wait to come down & take a class with you guys, haha!

 

[Newbie2020]

Don’t bring your safe queen!