I am new to the suppressor world. I recently got a sand man L took it out and tried to sight it in was all over took the can off and in the picture the 3 top shot were with no can( I'm not a professional shooter) put the can on and the two lower shots were the first two shots the next two shots didn't hit paper. Was at a range at 100 with a lead sled. I am shooting a bergara 300 win mag with hornady precision Hunter 200 grain eld-x factory ammo. Any advise on what could cause such a drastic change would be much appreciated.
-
Having trouble using the site?
Contact support
Suppressors Accuracy issues with can
- Thread starter Stewy151
- Start date
My can alters my POI 1.0 mil on both my rifles, doesn’t change group size though. Ditch the led sled and use a bipod and rear bag, that sled will tear that gun up.
I agree the led sled not the most accurate but got a decent 3 shot group with it without the can on and then being that far off with it. Seems like may be a separate issue. I expected to have to rezero but I couldn't get a consistent group at all with the can on I put over a box through it and was all over or off paper completely
Some silencer and rifle combinations just don't work well together. I suspect the weight of Sandman-L is causing the issue. What taper barrel?
I'm not sure what the taper is couldn't find on the website. Possible it could just not be a good match. But I have seen other threads of people using them on the same rifle. I will have to dig into it more and see. Try my can on another rifle.
It might be a slight strike issue. I had a similar issue on one of my seekins SP10 rifles. No visible strike evidence but I changed to a different mount and adapter (saker 762) and it started shooting same sized groups as no can. Maybe look at barrel end profile where it's threaded and see id the mount could be cockeyed? (technical term....)
I will check that. I couldn't get the shims to line the break exactly at 12 o'clock did have to tighten a little more than I wanted to to get the last like 1/16 inch to line it up at 12
Kind of hard to get a picture of but there is a little dimple on the end cap and looks like a bit of a groove can only see on the last 4 baffles is this similar to what you saw with the glancing issue on yours or am I seeing things?
Attachments
T
They are only on the last 4 baffles and the end cap not on all of them is that normal?
I’m not seeing what you’re seeing in the end cap. Take some focused pictures of it.
I was having the same issues with my sandman S/L and K. I have a AX .260 with a 24in barrel and My rifle hates the ELD-X, for some dumb reason it wouldn’t shoot the hornady ammo with the can smaller than 1.5in at 100. I used some 130 Berger’s from coppercreek and it would bring the group back to .3-.5in.
If I could get to 1.5 inch group I'd feel ok with that I had 2 bullets not hit paper and 2 growing lower each shot. I will try a different ammo. I don't know anyone else with a 300 win but have one buddy with the S and one with the TI shooting Hornady eldx with a 6.5 creedmoor really well
The group I shoot with have sandman’s, thunderbeasts and sakers. Lately we all have issues with the ELDXs and were not sure why.
I just checked all of the cans and none of them have a mark like that. The photo is a bit out of focus but it might be a strike. I had strike from a bad brake, dead air made it right and painted the can (burned off doing full auto)...for free.
This looks like a strike... Have to verified the supressor/mount/barrel thread alignment with an alignment rod?
I just ordered an alignment rod Friday night waiting for it to show up so I can verify. I have been in touch with dead air sent them the pictures as well will hopefully hear back from them and get the rod soon so I can verify.
I will
I have been in touch with them I've heard good things about them making things right when there is an issue. I don't reload all I've seen for factory ammo with Berger bullets is HSM I can't purchase their ammo any recommendations on a factory ammo to try? Thanks for the info
From the pictures you provided I think those Notches are normal. My saker has similar notches in the first couple of baffles. Still worth looking at alignment. Like I mentioned, I changed mounts and adapters on 2 of my rifles and it fixed the issue. Nothing visible on the end cap. Hope DeadAir can help you figure it out.
The keyhole notches in the baffles are normal as it had been stated several times already. The small clip inside the end cap he posted does not look normal though
Damn in that picture that looks normal now that it's clear. Pull the end cap off and take a pic of the back
That is the same mount I had problems with (the Dead Air mount for the saker.) The Silencerco mount sucked. I launched my can down range once due to a Bad lock up. I changed to the 51T ACC tri tip flash suppressor and adapter and that fixed it. YMMV.
not sure that’s an option for your can.
not sure that’s an option for your can.
I think at this point until I'm at a stand still until my alignment rod comes. Van check it on my gun with my break and have a friend with multiple rifles set up for sandman cans will put the can on his rifles and check alignment on multiple guns. I pulled the brake and used new shims and retourqued it. If it's still all over will try different ammo. If that doesn't work I'll have a really expensive paperweight
