Group Buys Aftermarket AI "Obsession" Chassis - Group Buy

$799

Yup, you read that right. GCP Rifle Co has the AO/V chassis IN STOCK and ready to ship, cerakoted in your color of choice, for $799. Additional options include:
- Short NV bridge
- Full length enclosed NV bridge
- 20MOA pic rails for either length bridge
- Internal/external weights
- Full de-bond and re-bond by Rick at GCP
- Custom cerakote colors and patterns

If you're even remotely on the fence about upgrading your AW, AT, or AX, you're sick of waiting for other options, or you're looking to take your current AI rifle to the next level for competitions, don't hesitate to call Rick at 440-213-5585. We will get you taken care of for whatever project you're able to dream up!

Thanks,

Sam

07_AI.jpg
08_AI.jpg
02_AI.jpg
03_AI.jpg
04_AI.jpg
05_AI.jpg
06_AI.jpg
 
So I had a idea and bought some stuff. Right now I haven’t had any real time with it. But I think it’s gonna be a big success. I used a BCM mlok to QD to mount the sikes clutch. Picked bcm due to its smooth lines for comfort reasons. Figured I would share. I’ll get more photos and info once I really get to try it.
 

Attachments

  • DC6CCFE4-6959-4BF6-8C2A-0449D9948204.jpeg
    DC6CCFE4-6959-4BF6-8C2A-0449D9948204.jpeg
    507.6 KB · Views: 129
Buddy of mine had one of these at the last match on his KRG and I ordered one the next day. Feels better than the grayops thumb shelf that I have as well. $15 won't too bad for it.



signal-2021-10-03-114432.jpg
 
  • Like
Reactions: bb505 and RS14
Got mine all put together and ready to hit the range. I followed the videos at the beginning of this thread and that made things really simple, didn't see anything about putting the mag catch back in but figured it out pretty quickly. Really liking the balance so far, not sure if I'm going to need weights or not. Without a suppressor it might need some, or possibly just go with a straight contour barrel?

20211019_150214.jpg
 
Got mine all put together and ready to hit the range. I followed the videos at the beginning of this thread and that made things really simple, didn't see anything about putting the mag catch back in but figured it out pretty quickly. Really liking the balance so far, not sure if I'm going to need weights or not. Without a suppressor it might need some, or possibly just go with a straight contour barrel?

View attachment 7724760
Thanks for your business!!!

Personally I run all of the internal weights, and no external weights. It balances perfectly for me on a GC Shmedium. That’s with a 24” MTU and suppressor.
 
Got mine all put together and ready to hit the range. I followed the videos at the beginning of this thread and that made things really simple, didn't see anything about putting the mag catch back in but figured it out pretty quickly. Really liking the balance so far, not sure if I'm going to need weights or not. Without a suppressor it might need some, or possibly just go with a straight contour barrel?

View attachment 7724760
Very nice. Which green is that?
 
What is this little gem? 😀
Post 298
 
  • Like
Reactions: Bravo6niner
The vision is a huge upgrade for positional shooting. I’ve got a couple coyotes with a shmedium bag resting off the top of a fence post and off a piece of farm equipment. It just drops onto the bag so much better than the AX chassis does. Plus with this setup I have a folding stock unlike my ATx at the moment 🤦🏻‍♂️
 
If one were to happen upon an AI action, but not from a bonded chassis, does Mile High have the washers and bolts?

Or does anyone have some aftermarket part numbers from a hardware supplier?

Thanks
 
If one were to happen upon an AI action, but not from a bonded chassis, does Mile High have the washers and bolts?

Or does anyone have some aftermarket part numbers from a hardware supplier?

Thanks
All you will need is the (2) rear action bolts and the (4) brass washers. The front action bolts are different and are included in the AO/V kit.

Mile High should have the parts you need, sorry but I don’t have the part numbers.

If you can’t source them from Mile High let me know, I might have some extras in my parts bin but I don’t know for sure.

Sam
 
All you will need is the (2) rear action bolts and the (4) brass washers. The front action bolts are different and are included in the AO/V kit.

Mile High should have the parts you need, sorry but I don’t have the part numbers.

If you can’t source them from Mile High let me know, I might have some extras in my parts bin but I don’t know for sure.

Sam

Thanks!

Also, I can't remember off hand....are the stocks on the aics chassis the same as AI rifles? I.E., will the stock and folder from an AT AICS stock work on your/vision chassis?
 
  • Like
Reactions: samb300