Another Picture Thread - All Other Semi-Autos

not exactly a picture...

this is 5 shots from my Scar 20S at some steel hangers at 609 yards.
the one on the right is 12" but not sure what size the left one was to start. maybe 16"?
i didn't see i was a little right until i saw the miss. i should have waited for it to stop swinging and it would have been 5/5.
first time shooting from a bench at a range, so not too bad. bipod and rear bag.

 
  • Like
Reactions: Lawless
B&T APC9K Pro... Imagine a slick telescoping stock on it:

IMG_8368.jpeg
IMG_8369.jpeg
IMG_8370.jpeg
IMG_8371.jpeg
IMG_8372.jpeg
IMG_8375.jpeg
MSTN logo-lg.jpg
 
Last edited:
Couple LWRC’s that I adore. The IC SPR has a SWFA 1-6 that I actually really like (thanks again @Bcamos ). The little guy is their NJ-legal Oscar Foxtrot (other firearm). It the only way we can own anything under 16” barrel and have a pistol brace. Btw, the Cloud Defensive OWL is the shiz!
 

Attachments

  • 046E1209-9813-4AEE-AC0D-6C69A48A173A.jpeg
    046E1209-9813-4AEE-AC0D-6C69A48A173A.jpeg
    66.5 KB · Views: 152
  • C7B6286C-6F4E-44B3-847E-CD89514BED96.jpeg
    C7B6286C-6F4E-44B3-847E-CD89514BED96.jpeg
    41.4 KB · Views: 160
  • 2DF8B048-F98A-4233-87FE-F1CDFDFC8E01.jpeg
    2DF8B048-F98A-4233-87FE-F1CDFDFC8E01.jpeg
    66.8 KB · Views: 161
  • Like
Reactions: Bcamos
Couple LWRC’s that I adore. The IC SPR has a SWFA 1-6 that I actually really like (thanks again @Bcamos ). The little guy is their NJ-legal Oscar Foxtrot (other firearm). It the only way we can own anything under 16” barrel and have a pistol brace. Btw, the Cloud Defensive OWL is the shiz!
You gotta bring that little guy down to Texas so we can have some fun with it.
 
  • Like
Reactions: ManOfSteel
I'll play!

Kriss Super V in 9mm:
IMG_1241.JPG


Steyr FAL w/lots of updates including Jard 2 stage trigger:
IMG_0933.JPG


Integrally suppressed Kidd 10/22, no Ruger parts:
IMG_0837.JPG


M2HB, 6x ACOG plus other high speed shit:
IMG_1020.JPG


SR25 ain't exactly an AR but it ain't exactly NOT one either... So I'll leave that one out. Working on my non-AR shit currently.
 
What we have here is an SG 551 rifle consisting of all 100% new Swiss components with the exception of the six U.S. made parts (all 100% new as well) required to ensure ATF 922r compliance. Several years ago, I wrote to the ATF requesting the list of 922r parts present in the SAN Swiss 550-series of weapons. The better part of three years later, I received a reply. Interestingly, the ATF's list of 922r parts does not quite agree with any such list I've seen on the internet, before or since. By starting with a Swiss 550-series lower receiver group that accepts U.S. format AR' magazines, we simplify the compliance process, since the U.S. magazine (Magpul Gen III Pmag, in this case) consists of three 922r parts, the magazine body, floor plate, and follower. Then, I added the U.S.-made Shooting Sight hammer and disconnector, two more 922r parts, and a surprisingly nice trigger upgrade. These components reduce the trigger pull to a crisp 2-stage pull about 2/3 the weight of the stock Swiss rifle. To the new SAN Swiss Arms SG 551 conversion kit, or upper receiver assembly, I added a new Swiss SG 550 bolt, new Swiss SG 550 charging handle, and a new SIG 556 bolt carrier, the last U.S. made 922r part required. The rifle also comes with a new SG 551 owner's manual printed in Switzerland.



IMG_8575.jpeg
IMG_8576.jpeg
IMG_8577.jpeg
IMG_8578.jpeg
IMG_8579.jpeg
IMG_8581.jpeg
IMG_8582.jpeg
IMG_8583.jpeg
IMG_8584.jpeg
IMG_8585.jpeg
 
What we have here is an SG 551 rifle consisting of all 100% new Swiss components with the exception of the six U.S. made parts (all 100% new as well) required to ensure ATF 922r compliance. Several years ago, I wrote to the ATF requesting the list of 922r parts present in the SAN Swiss 550-series of weapons. The better part of three years later, I received a reply. Interestingly, the ATF's list of 922r parts does not quite agree with any such list I've seen on the internet, before or since. By starting with a Swiss 550-series lower receiver group that accepts U.S. format AR' magazines, we simplify the compliance process, since the U.S. magazine (Magpul Gen III Pmag, in this case) consists of three 922r parts, the magazine body, floor plate, and follower. Then, I added the U.S.-made Shooting Sight hammer and disconnector, two more 922r parts, and a surprisingly nice trigger upgrade. These components reduce the trigger pull to a crisp 2-stage pull about 2/3 the weight of the stock Swiss rifle. To the new SAN Swiss Arms SG 551 conversion kit, or upper receiver assembly, I added a new Swiss SG 550 bolt, new Swiss SG 550 charging handle, and a new SIG 556 bolt carrier, the last U.S. made 922r part required. The rifle also comes with a new SG 551 owner's manual printed in Switzerland.



View attachment 7266299View attachment 7266300View attachment 7266301View attachment 7266302View attachment 7266303View attachment 7266304View attachment 7266305View attachment 7266306View attachment 7266307View attachment 7266308
Thats the gangsterest shit I ever seen't
What optic you planning? And you totally gotta put some groups up...
as well - is there any chance we could get a pic with handguard removedd?
Thank you sir, and congrats on the Ferrari of rifles hah ;) (y)
 
  • Like
Reactions: MSTN
What we have here is an SG 551 rifle ...



View attachment 7266299

Way back, I aplied for a Permit for a 551. Gun laws being what they are, in my corner of the world, that got stuck in the bureaucracy, a bit above the local level: too short when folded, for a local decision. I got tired of waiting and made another application. Local Police gave me a permit for an AUG, and I dropped the 551 process...

During a Government Temp job, I got the chance to fire a few shots through a 550 derivative. I recall it was quite nice.
 
This beautifully designed and manufactured Swiss design is over 30 years old and still going quite strong.

Our nation's high speed guys explored the use of SG 550 pattern weapons about 20 years ago and perhaps used them to some extent. Knight's Armament invested a ton of $$$ in developing an aluminum lower receiver group for the SG 552 that used an M4 stock and lower receiver extension on the same Swiss folding stock mechanism, M4 safety, and M4 pistol grip. The KAC 552 lower still retained the SG 550-series magazine and AK' style mag release.
 
  • Like
Reactions: perttime
My most accurate AR is a Wilson Combat Recon Tactical 18" 6.5C.

On the right.

KYfEZky.jpg


Not too shabby, especially since I have a knack for pulling the 5th round.


vANWIOi.jpg
 
oh how i want this
1585298298869.png

and it's semi auto to boot . always wondered why besides the military no one has modernized an ar version of this or have they ? and not the mini gun or vulcan cannons just a multi barreled ar 10 300 win mag hell even a 308 would not be bad or something like that , box fed Gatling gun . this version the one in the pic would look nice to taking it to the range a couple of times per year .
 
Tavor SAR 9mm w/integral Mepro MOR tri power relfex sight and 5mW IR and red lasers, Omega 9k can and ASR mount. Geissele trigger bow and Timney trigger pack. The cable routed to the button in the handguard had to be cut, soldered and heat shrink applied, then ran through a high temp wire cover. Anyway, that's what that button is for in the handguard on a Tavor SAR.

IMG_1283.JPG

IMG_1282.JPG

IMG_1284.JPG