Anybody got any info on 6.5-06?

Been shooting 6.5-06 for years at 1000 and up to 1600 yards with 142 smk bullets. Make my brass from 25-06. A friend makes his from .270 brass.
Have over 2300 rounds thru the barrel, but is due for a new one as soon as I get time. Starting to get a few fliers.
 
I have a 6.5 06 AI, it is my hunting rifle. It will almost duplicate 6.5 mag. speeds. I make brass from 270 because we have 2, 25-06 so we don't mix brass. If you get excited about this I have PTG reamer and go gauge. This is a very accurate round and with the 40° shoulder it is easy on brass. I shoot 140 gr Bergers and they will feed though DBM. RLW>
 
I have a 6.5 06 AI, it is my hunting rifle. It will almost duplicate 6.5 mag. speeds. I make brass from 270 because we have 2, 25-06 so we don't mix brass. If you get excited about this I have PTG reamer and go gauge. This is a very accurate round and with the 40° shoulder it is easy on brass. I shoot 140 gr Bergers and they will feed though DBM. RLW>

How much to rent this said reamer and go gauge. So far this is the route I'm going sounds like a really good round with good performance from what I have read.
 
I had the standard chamber and now own an AI. I use h4831sc, because it gives great velocity and SUPER low ES, right before max pressure. I shoot 140 Bergers @3100 fps into very tight groups. The longrange performance of the 06 AI is phenomenal, I am surprised how little fanfare it enjoys here. I have never tried 7828ssc or h1000, have both sitting on the shelf waiting, but h4831sc is so good I haven't played with anything else.