• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Anybody got any info on 6.5-06?

Been shooting 6.5-06 for years at 1000 and up to 1600 yards with 142 smk bullets. Make my brass from 25-06. A friend makes his from .270 brass.
Have over 2300 rounds thru the barrel, but is due for a new one as soon as I get time. Starting to get a few fliers.
 
I have a 6.5 06 AI, it is my hunting rifle. It will almost duplicate 6.5 mag. speeds. I make brass from 270 because we have 2, 25-06 so we don't mix brass. If you get excited about this I have PTG reamer and go gauge. This is a very accurate round and with the 40° shoulder it is easy on brass. I shoot 140 gr Bergers and they will feed though DBM. RLW>
 
I have a 6.5 06 AI, it is my hunting rifle. It will almost duplicate 6.5 mag. speeds. I make brass from 270 because we have 2, 25-06 so we don't mix brass. If you get excited about this I have PTG reamer and go gauge. This is a very accurate round and with the 40° shoulder it is easy on brass. I shoot 140 gr Bergers and they will feed though DBM. RLW>

How much to rent this said reamer and go gauge. So far this is the route I'm going sounds like a really good round with good performance from what I have read.
 
I had the standard chamber and now own an AI. I use h4831sc, because it gives great velocity and SUPER low ES, right before max pressure. I shoot 140 Bergers @3100 fps into very tight groups. The longrange performance of the 06 AI is phenomenal, I am surprised how little fanfare it enjoys here. I have never tried 7828ssc or h1000, have both sitting on the shelf waiting, but h4831sc is so good I haven't played with anything else.
 
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.