Re: Backpack for tall guys?
One thing to keep in mind with Eberlestock packs is they are designed to "ride high". This the best way to center the load above your hips, instead of at your waist. You shouldn't have any downward hang or pull of the shoulder harness at your shoulders. Before you mount the pack, adjust the shoulder harness to the "tallest" vertical setting. Upon slinging the pack, determine that the lower pad on the pack (called the Lumbar Pad) along with the waist belt are located at the top of your pelvis. Cinch the belt to your desired tightness and then pull the straps at the shoulder harness (these are called the load lifters) until the upper portion of the pack is snug again the upper portion of your back. If it is correctly fitted, there should be no indication of downward pull at the shoulder straps between the top of your shoulders and the top of your pack. In fact, the portion of the shoulder harness at the top of your shoulders should actually be horizontal, with a small space between the strap & the upper back portion behind the shoulder.
Eberlestock packs do not fit like a traditional day pack, where the load is carried at the shoulder straps. With Eberlestock, the shoulder harness is there to give stability & center the load above your hips & as close as possible to your back. If it is fitted correctly, you shouldn't have muscle fatigue at your shoulders or lats (the muscles between your neck & shoulder).
Hope this helps. Yes, pics would help tremendously & I'll try to get some up this weekend. I'm NOT saying that the OP is fitting his pack wrong. He may have done everything above and still not get an adequate fit. However, 99% of the time, when an Eberlestock pack owner, regardless of individual torso length, claims that it doesn't fit, it is usually due to not getting the adjustments done correctly based on how these packs are designed to ride.
Ceylon
deltaoutdoorsman.com