Badger M2008 Builds.....Where are they?? Pics...

Re: Badger M2008 Builds.....Where are they?? Pics

Hey all,

quick questions about your rifles.

Is there a clearance problem with the Badger M2008 bolt and AICS stock where rubbing occurs? (I recall seeing one for sale here that had a really bad rubbing issue)

Does the Badger M2008 action only come in stainless? What are you guys using to finish the action/barrel in black?

How much are one of these actions? I can't find one for sale anywhere!
 
Re: Badger M2008 Builds.....Where are they?? Pics

with the rubbing of the stock, mine doesnt do it. I have an AICS 2.0, i have no solid evidence but i believe that it has to do with how much material was removed from the chasis. Yea they only come in stainless, mine was duracoated. Call up Marty @ badger and see if he has any instock
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYSHOOTER338</div><div class="ubbcode-body">I'll play. Here are my three.

Urban Flectarn - 6.5x47L
Desert Flectarn - 260 Rem
Multicam - 6.5 CM

2lcwiki.jpg

6dzwd0.jpg

20it9hd.jpg

</div></div>

I hate you haha.
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Johnson184</div><div class="ubbcode-body">Hey all,

quick questions about your rifles.

Is there a clearance problem with the Badger M2008 bolt and AICS stock where rubbing occurs? (I recall seeing one for sale here that had a really bad rubbing issue)

Does the Badger M2008 action only come in stainless? What are you guys using to finish the action/barrel in black?

How much are one of these actions? I can't find one for sale anywhere!</div></div>

I have a folder built up and 1.5, neither one rubs on the skins. GAP did the build on both. Mine are Cerakote coated.

As far as price, I purchsed 2 Gen IIs las Novermber for $980 each plus shipping, standard 308 boltface/short cation. I would check with the Badger's website. The price may have gone up a little. But I'm not sure. A very, very nice action at a very reasonable price.
 
Re: Badger M2008 Builds.....Where are they?? Pics...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg308</div><div class="ubbcode-body">I'm not a Jewel fan but if yours is mushy it is not adjusted properly. </div></div>

Sorry but every Jewel I've ever felt, felt squishy. Felt ones adjusted by GAP, set by Jewel, and I tried my hand at one for 15 minutes. All the same. I dont know about myself or Jewel, but if it came that way from GAP, I dont think its getting much better.

The squishiness is a trait of Jewels it seems.
 
Re: Badger M2008 Builds.....Where are they?? Pics...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg308</div><div class="ubbcode-body">I'm not a Jewel fan but if yours is mushy it is not adjusted properly. </div></div>

Sorry but every Jewel I've ever felt, felt squishy. Felt ones adjusted by GAP, set by Jewel, and I tried my hand at one for 15 minutes. All the same. I dont know about myself or Jewel, but if it came that way from GAP, I dont think its getting much better.

The squishiness is a trait of Jewels it seems. </div></div>

What trigger would you recommend that is not squishy and is crisp?
 
Re: Badger M2008 Builds.....Where are they?? Pics...

Any of the aftermarket triggers are fine. And most are half the cost of Jewels.

Get whichever one your gunsmith likes to install.

Nothing "wrong" with Jewels. But in my opinion, they arent worth what they cost. I dont care if they put more effort into making them... the effort's in vain.
The "squishy" feeling is consistant every time and the trigger probably moves a few thousanths at most before breaking. BUT, thats not the glass rod people expect.



Very nice rifles guys. I cant wait to check out one of those actions.
 
Re: Badger M2008 Builds.....Where are they?? Pics...

No love for the long actions?

frown.gif


Really love to see someone's build for an Edge or Lapua ...


You folks have some gorgeous sticks here.
 
Re: Badger M2008 Builds.....Where are they?? Pics...

On the Jewel topic... I spoke to a smith that said he tunes them to get the squishiness out. Couldn't explain how he does it, but said he can.

So maybe there's a way that I don't know, and jewel & gap don't practice. Cause like I said every jewel I've squeezed felt exactly the same.

If anyone knows a lot about jewels and can edumicate me, on getting the squishiness out, I'd love to hear how.

Keith
 
Re: Badger M2008 Builds.....Where are they?? Pics...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body">On the Jewel topic... I spoke to a smith that said he tunes them to get the squishiness out. Couldn't explain how he does it, but said he can.

So maybe there's a way that I don't know, and jewel & gap don't practice. Cause like I said every jewel I've squeezed felt exactly the same.

If anyone knows a lot about jewels and can edumicate me, on getting the squishiness out, I'd love to hear how.

Keith</div></div>


Just got my jewell in my build from GAP. They took out all the creep. Breaks like glass.
 
Re: Badger M2008 Builds.....Where are they?? Pics

ODbadgerPDC001.jpg


Badger m2008 action
26" Bartlein gain twist 1-10.25-9.5
PDC Custom folding chassis
UNS rail
Cerakoted OD green
Huber 2 stage tactical trigger

I had the bolt melontine coated and then I reworked the firing pin and spring to make the bolt lift easier and smoother.

Surefire quick attach supressor and muzzle brake,
Scope Specs: SN3-2500 5-25x
T-Pal Left -
58mm T-PAL -
EREK 1/4 MOA
U.S. #3 1/4 MOA
35mm
O.D. Green Type III Hard Anodizing -
RDP MOA
11 Pos Rheostat (Red)
Lo Profile Housing -
Rapid Focus -
USO Flipup Objective Cover -
USO Flipup Eyepiece Cover -
44mm Fixed 2" Sunshade -
Polarizer/ARD -
35mm P6M-3500-L
Rail Mounted Swivel Bubble Level - Contoured
 
Re: Badger M2008 Builds.....Where are they?? Pics

Bringing this back up.

Are any modifications necessary to make the M2008 run with AW mags? My configuration is going to be with a A5 and M5 bottom metal if that makes any difference.
 
Re: Badger M2008 Builds.....Where are they?? Pics

Here's mine:

M2008 Gen 1 action
18.5 Schneider Barrel w/ Surefire brake
Jewel Trigger
Manners T4A stock w/ Badger M5 BM
Badger USMC 34mm rings
S&B 5-25x56

2myotp4.jpg


Yes it has a shitty sling on it that I scavenged off a work rifle for the time being.
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: velcroflyer</div><div class="ubbcode-body">Here's mine:

M2008 Gen 1 action
18.5 Schneider Barrel w/ Surefire brake
Jewel Trigger
Manners T4A stock w/ Badger M5 BM
Badger USMC 34mm rings
S&B 5-25x56

2myotp4.jpg


Yes it has a shitty sling on it that I scavenged off a work rifle for the time being. </div></div>

Handy little critter
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bacarrat</div><div class="ubbcode-body">Bringing this back up.

Are any modifications necessary to make the M2008 run with AW mags? My configuration is going to be with a A5 and M5 bottom metal if that makes any difference. </div></div>

no no mods are necessary, you may need to grind down the magazine latch on whatever bottom metal you intend to use, but nothing to the action
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Adam B</div><div class="ubbcode-body">

I have a 7WSM currently being built
</div></div>

Adam, Did you get that 7wsm finished yet?
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bacarrat</div><div class="ubbcode-body">Bringing this back up.

Are any modifications necessary to make the M2008 run with AW mags? My configuration is going to be with a A5 and M5 bottom metal if that makes any difference. </div></div>

Like this?

P1030372.jpg
 
Re: Badger M2008 Builds.....Where are they?? Pics

Saving this spot for mine. Tim Click is building me a 243 with a 7.5 twist bartlein badger m2008 badger m5 bottom metal in a Manners T5a should be sweet. (and I already have my t5a adam) Thanks Tom.
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RADcustom</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bacarrat</div><div class="ubbcode-body">Bringing this back up.

Are any modifications necessary to make the M2008 run with AW mags? My configuration is going to be with a A5 and M5 bottom metal if that makes any difference. </div></div>

Like this?

P1030372.jpg
</div></div>

I need more pics of this please! It's pretty close to what mine is going to be. M2008 in a GAP camo A5 with a M5 bottom metal. I have been emailing Marty about it and he says the modification is going to be dependent on the inlet. Did you have to modify your latch any?
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bacarrat</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RADcustom</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bacarrat</div><div class="ubbcode-body">Bringing this back up.

Are any modifications necessary to make the M2008 run with AW mags? My configuration is going to be with a A5 and M5 bottom metal if that makes any difference. </div></div>

Like this?

P1030372.jpg
</div></div>


I need more pics of this please! It's pretty close to what mine is going to be. M2008 in a GAP camo A5 with a M5 bottom metal. I have been emailing Marty about it and he says the modification is going to be dependent on the inlet. Did you have to modify your latch any? </div></div>


No, but the rifle came to me running AICS mags. I found someone at a match with AW mags and tried one and it fit perfect, so I ordered one. It feeds fine with either type of mag. If there was any modification done to the latch, it was done before I got it.
 
Re: Badger M2008 Builds.....Where are they?? Pics

Easy_E

That's look real great.

I'm planning for my first custom stick. We still have to wait for quite a few more months before we can import .308 or larger rifle into country again. A good opportunity to look around for build options.
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Adam B</div><div class="ubbcode-body">the barreled action is done but I am waiting on manners to finish my t5 and mini chassis for it, hurry up tom you are killing me
wink.gif
</div></div>

I bought the 7WSM and had Robert rebarrel it in 300WM. Now it wears paint by ARP and a Tigershark suppressor.
smile.gif
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYshooter338$</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Adam B</div><div class="ubbcode-body">the barreled action is done but I am waiting on manners to finish my t5 and mini chassis for it, hurry up tom you are killing me
wink.gif
</div></div>

I bought the 7WSM and had Robert rebarrel it in 300WM. Now it wears paint by ARP and a Tigershark suppressor.
smile.gif
</div></div>

Pics, or it didn't happen.
 
Re: Badger M2008 Builds.....Where are they?? Pics

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">RAD-C, now that is a good looking rifle!!
</div></div>

You just like it cause its got a Hensoldt on it.
laugh.gif