Rifle Scopes Badger Ordance 1005-306-07..Base Screws to small!!

bigbore74

National Armory
Full Member
Minuteman
Aug 3, 2012
104
0
PA
I have a Remington 700 338 Police. I ordered a Badger Ordance Scope Mount for the Remington 700 part #1005-306-07. Assuming all is correct today I found out that the BA screws fall in the treads on the barrel? There not even close to specs. Where can I get the correct size mount screws? Where did I go wrong?
confused.gif
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

There seems to be a large lot of #8-40 screws. I feel that I could just find the right length #8?
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

The base was off ebay. When I asked the seller about the specs he did not know, for it was a direct shipment from CA. I emailed Badger not long ago asking the specs on the required length #8-40 or if they could send me a set since it was direct from them.

Ebay seller has a No returns No Refund Policy.
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bigbore74</div><div class="ubbcode-body">The base was off ebay. When I asked the seller about the specs he did not know, for it was a direct shipment from CA. I emailed Badger not long ago asking the specs on the required length #8-40 or if they could send me a set since it was direct from them.

Ebay seller has a No returns No Refund Policy. </div></div>


What have we learned about buying from Ebay? Seriously though ebay is a complete crap shoot, especially for shooting related items, and their prices are almost always crap.
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gunjunkie45</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bigbore74</div><div class="ubbcode-body">The base was off ebay. When I asked the seller about the specs he did not know, for it was a direct shipment from CA. I emailed Badger not long ago asking the specs on the required length #8-40 or if they could send me a set since it was direct from them.

Ebay seller has a No returns No Refund Policy. </div></div>


What have we learned about buying from Ebay? Seriously though ebay is a complete crap shoot, especially for shooting related items, and their prices are almost always crap. </div></div>

agreed, you probably could have supported folks like triad who are using their time to help you threw your problem and i wouldnt have cost you much if any extra.
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

Ok, well can't change the past. Let's move forward. What's the specs for the mount screws. I'm sure I can get the screws at a local shop.
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

Best bet? Call Badger on Monday and tell them what you have and need.

Alternative? Take the screws you have to a commercial bolt & screw supplier and match them for length with #8-40, but you may have a problem with exact length and will require trimming.

You will have to drill the base.

The easiest? Order the right one from Triad, and hang onto this one for another rifle. All other 700LA use this base.

Kevin
 
Re: Badger Ordance 1005-306-07..Base Screws to small!!

If you can have the base drilled out, I can get you the #8 screw set for about $7.00. Send me a PM with your contact info.

Triad is like crack, the first visit never costs that much.......