Best AR-10 mag thats not a p mag....?

[Texaslongshot]

I have a DD AR-10 (.308). Its been jamming alot and most recently would not pick up the next round off the magazine. I cleaned and lubed and it did the same thing. If i rested the gun on the magazine (p mag) it would pick up the next round. I think i have a magazine issue.

Recommendations on the best AR-10 mag thats not a p mag.......?

 

[nn8734]

KAC

 

[Docsherm]

I have a DD AR-10 (.308). Its been jamming alot and most recently would not pick up the next round off the magazine. I cleaned and lubed and it did the same thing. If i rested the gun on the magazine (p mag) it would pick up the next round. I think i have a magazine issue.

Recommendations on the best AR-10 mag thats not a p mag.......?

Other then PMAGs I use D&H TACTICAL 7.62MM 20RD STEEL. I have had no issues with them at all.

See Here:

MA-308-20-BLK D&H Tactical 7.62MM 20rd SR25 Pattern Steel Magazine

7.62X51MM NATO / 308 CALIBER SR25 PATTERN PLATFORM (KNIGHT’S, P.

dsgarms.com

​

 

[1911hombre]

If that DD rifle is malfunctioning with a known good P-mag the rifle is the problem. Lancer mags are my new favorite.

 

[Asiparks]

Have you tried a couple of different PMags ? If it repeats with others then it might be a slightly out of spec mag catch.

Not a big fan of the 308 Magpuls. I like Lancer, but they're expensive and a pain to find. I've also had zero problems with 30 round ProMags.
My gen 3 PMags bulge noticably towards the top when fully loaded, the Lancer and ProMags don't. On my MWS and POF's, the fully loaded PMags don't insert smoothly. Lancers and Promag are fine.
Empty PMag

Loaded PMag

Loaded Lancer

 

[sinister]

KAC, Larue, IMI.

 

[Downtown]

Another vote for Lancers.

 

[RUTGERS95]

Other then PMAGs I use D&H TACTICAL 7.62MM 20RD STEEL. I have had no issues with them at all.

See Here:

MA-308-20-BLK D&H Tactical 7.62MM 20rd SR25 Pattern Steel Magazine

7.62X51MM NATO / 308 CALIBER SR25 PATTERN PLATFORM (KNIGHT’S, P.

dsgarms.com

​

these are my go to mags. These have never failed me, tough as hell as well.

 

[8up]

What sinister said

KAC, Larue, Lancer, IWI

From metal to polymer, with one in between.

 

[Pappasniper]

KAC, hands down but I've run the D&H mags very hard without issue. Have Lancers and never has issues but have not run them as hard as KAC and D&H.

PB

 

[dogman]

My Pmags have run fine through three guns. I run Lancers and they have run fine through all three guns, as well.

 

[rpoL98]

like others are saying, if you want the absolute best, then KAC.

I'd agree with what others are saying, if it's not working with PMAGS, then it's not the mags.

 

[Milf Dots]

Lancer AWM

 

[Steve_In_29]

Lancers are my preferred mag. I did buy some PMags as back ups (they were half the price) and they work fine in both my PSA's.

 

[sinister]

I've been using Israeli E-Landers and C-Products Defense in my kid's SR-25 recently.

I haven't seen an IMI plastic magazine for a few years now.