Rifle Scopes Big objective on flat top receiver

[Sako man]

Ok, here's the question. I have a optic with a 56mm Objective and trying to mount it on a big AR gas gun, I would like to have 20moa so that makes things even more complex. So what mount does the crowd recommend?

Any advise appreciated.

 

[Maxduty]

https://www.snipershide.com/shooting/threads/ring-height-info-how-to-measure-correctly.20706/

 

[burneyr]

Scope tube size?

 

[Sako man]

Scope tube size?

34mm

 

[burneyr]

Spuhr 4616 ought to do it.

 

[flyright]

Or, 4602 non CL...

 

[Glassaholic]

Is this a large frame AR or small frame? If large frame you may not need a cantilever mount depending on if you have an adjustable LOP stock and have a scope with decent eye relief, here is a shot of my AR-10 with a Bushnell inside an ARC M10 QD-L 1.38" high mount, if I had a full rail the 50mm objective would just barely clear, so with a 56mm objective bell I would say you'd want a mount that was at least 1.5" high, ARC makes a mount that is 1.57" high which should work with your 56mm scope and flat top - https://www.americanrifle.com/shop/product/m10-qd-l-scope-mount-9?category=15

If you feel you do need a cantilever I'd recommend the Aadmount, ERA-TAC and BOBRO but there are other decent ones out there.

 

[strike33]

Used a Geiselle on mine, the pic is on a DT but you get the idea

 

[Glassaholic]

Used a Geiselle on mine

I always forget about Geiselle, they look like a nice piece of kit

 

[strike33]

They’re superb, become my preferred one piece mounts (especially when you can snag one during their 30% off sales) with the ARC as my go to rings