It measures only cca 1.5m in front of the sensor but it makes measurements at a much higher frequency than Labradar
-
Having trouble using the site?
Contact support
Bulletseeker Mach 4 doppler chrono
- Thread starter Mr.BR
- Start date
Yes, of course. I can send it immediately as application will be officialy issued.
BS measures V0 only. No export restriction if country is in Europe now. Other countries are in progress.
Is that site live to order here in the US ?
I see the link, site, etc, but is that good to go, or are we all just guessing at this point it will arrive ?
I see the link, site, etc, but is that good to go, or are we all just guessing at this point it will arrive ?
I ordered a couple of them yesterday, I’ll report back after they arrive and I have a chance to take them out and try them on a few different rifles from 22lr to 375CT.
Is it a rocket, is it a plane ?
no its a spherical radar lens prototype ,sort of booster to better measure fast varmint loads in .17-.22 cal , that will in one form or another be offered as an accessory as the tests seem to confirm it works well.
no its a spherical radar lens prototype ,sort of booster to better measure fast varmint loads in .17-.22 cal , that will in one form or another be offered as an accessory as the tests seem to confirm it works well.
Last edited:
SCIENCE!!!Is it a rocket is it a plane ?
Just order it so I live vicariously through you on Range 4 please.
Hello from France
Just ordered one on Armeca website as soon as it was available.
Link to the Bulletseeker : Armeca-vpc.fr
Bruno PUT owns the shop and with his collegue Jeremy DELETRE, are some of the best long distance shooter/spotter in Europe
King Of 1Mile 2022 in France
King Of 2Miles 2022 in France
Take care
Habu34
Just ordered one on Armeca website as soon as it was available.
Link to the Bulletseeker : Armeca-vpc.fr
Bruno PUT owns the shop and with his collegue Jeremy DELETRE, are some of the best long distance shooter/spotter in Europe
King Of 1Mile 2022 in France
King Of 2Miles 2022 in France
Take care
Habu34
Last edited:
Hello from France
The 120 GHz Transceiver TRA_120_002 is coming from « Silicon Radar GmbH (SiR), Germany »
siliconradar.com
Habu34
The 120 GHz Transceiver TRA_120_002 is coming from « Silicon Radar GmbH (SiR), Germany »
120 GHz Transceiver TRA_120_002 - indie Semiconductor FFO GmbH
A compact 120 GHz radar transceiver on a chip in the 120-GHz ISM band. It is characterized by a high measurement resolution.
siliconradar.com
Habu34
Last edited:
Id bet you can just duct tape it on
i'd be curious how close it needs to be. i.e. can it just sit on the ground/bench between the bipod legs (provided visibility down range)
And the Bulletseeker Instructions:
Products can be mounted from 10.5" to 24" behind the muzzle. This applies to all calibers.
Last edited:
And the air rifle conversion kit is not available for all calibers ;-) (It was the first version of the Bulletseeker limited to 350m/s)Why would you send that demo version to me, there are not much posse on the forum, that do hear or read Portuquese
Tikka T3X CTR 24" 6.5 Creedmoor on MDT LSS-XL GEN2
As the detection begins at the muzzle, on my rifle there is only 100-33 = 67 centimeters available for measurements instead of 100 cms announced) (The Bullet seeker should be between 27cm and 60cm behind the muzzle according to the instructions supplied. (10,5 to 24 inches).
Initially the Bulletseeker was designed for Air rifles, so the detection could start at the muzzle until the end of first 100 centimeters.
Last edited:
It should be possible to 3D print an arca rail adapter instead of the picatinny rail adapter and to mount it with the two existing screws..(and less bulky)
Maybe Longseeker could also sell a tripod adapter with 1/4" and 3/8" Thread Holes (Or just a small picatinny rail with with 1/4" and/or 3/8" Thread Holes like below)
Source: https://www.facebook.com/armecaTLD
The first accessory to be released according to Longseeker : « For difficult situations (especially with strong muzzle clouds) a parabolic adapter is available which enables to receive more data (more detections) . As a standard, it only measure on the first meter. With a parabolic attachment up to 2-3 meters. »
A picture of a prototype :
source: https://www.facebook.com/EasyReloading/
Maybe Longseeker could also sell a tripod adapter with 1/4" and 3/8" Thread Holes (Or just a small picatinny rail with with 1/4" and/or 3/8" Thread Holes like below)
Source: https://www.facebook.com/armecaTLD
The first accessory to be released according to Longseeker : « For difficult situations (especially with strong muzzle clouds) a parabolic adapter is available which enables to receive more data (more detections) . As a standard, it only measure on the first meter. With a parabolic attachment up to 2-3 meters. »
A picture of a prototype :
source: https://www.facebook.com/EasyReloading/
Last edited:
Since you ordered, have you gotten an update on shipping or iOS compatibility yet? Thanks
I finally found someone in Europe willing to sell me one. Will share my experience when I get it.
Just received mine today will use it on a workshop tomorrow with some 26 guns (at least those that have pic rails) and try to compare it with a couple of Labradars
He has both of ours in hand as of last week (we ordered two)Since you ordered, have you gotten an update on shipping or iOS compatibility yet? Thanks
Apple app is supposed to be out soon. It was too windy for him to go over the weekend. Works good in his backyard with his pellet rifle.
I’m sure he’ll have an update for us after this weekend on his 375ct.
He is going to set up both of them as well as his Magnetospeed and Labradar all at the same time to compare velocities.
I have received both of the devices and have the android version 12 app, they are going to send me the Apple app this week as well.Since you ordered, have you gotten an update on shipping or iOS compatibility yet? Thanks
Sorry, only French language with accent ;-)
Otherwise, you have to select subtitles and automatic translation in english with youtube.
Sources :
Benjamin GINESTE (2016 World recordman https://www.thefirearmblog.com/blog/2016/11/03/408-cheytac-at-4-540-yards/)
https://www.facebook.com/Balistique-05-103034977885033/
Armeca
https://www.facebook.com/armecaTLD/
Last edited:
Drawn up a design for a 3d printed mount for Anschutz 64MPR stock
www.thingiverse.com
Picatinny rail for MPR64 by One_T
Picatinny rail bridge for Anschutz 64 MPR stock aded also one for a centerfire riflestock Print with supports
www.thingiverse.com
Last edited:
Yes, app for iOS is loadable for testers and in final phase. Probably it will be published on the end of week or on start of next week
Got mine. Guess I’ll have to find an android something to use in the meantime.
Similar threads
