-
Having trouble using the site?
Contact support
Cadex Defence, flaunt it if you've got it!
- Thread starter Shawn Bevins
- Start date
I had originally posted this in the other rifle pic thread. Had it out to 1580 yards so far.
6.5 Creedmoor
Cadex Lite Competition Chassis
Cadex DX2 Trigger
Surgon 591 action
Bartlein barrel (26" medium palma)
APA Little B. brake
Vortex Razor HD AMG Scope
6.5 Creedmoor
Cadex Lite Competition Chassis
Cadex DX2 Trigger
Surgon 591 action
Bartlein barrel (26" medium palma)
APA Little B. brake
Vortex Razor HD AMG Scope
Finished my tikka 6.5 build. Bought the Tikka T3X CTR 20" stainless in 6.5cm and dropped it in the Cadex Competition Lite chassis.
-Factory T3X CTR 20"
-TBAC Ultra 9
-factory 0MOA Tikka rail
-Spuhr 20MOA 1.5" rings
-Vortex AMG
FYI I barely had enough clearance with the 1.5" height spuhr with the AMG if anyone is building something similar.
waiting on a front rail for the bipod. Surprised it didn't come with it...
Cheers
-Factory T3X CTR 20"
-TBAC Ultra 9
-factory 0MOA Tikka rail
-Spuhr 20MOA 1.5" rings
-Vortex AMG
FYI I barely had enough clearance with the 1.5" height spuhr with the AMG if anyone is building something similar.
waiting on a front rail for the bipod. Surprised it didn't come with it...
Cheers
One is not enough.
Also want to say thank you to Cadex defense customer service they go above and beyond .
a pair 260 imp 30* mags without blinder plates feed ramp cut to set em long
Also want to say thank you to Cadex defense customer service they go above and beyond .
a pair 260 imp 30* mags without blinder plates feed ramp cut to set em long
For some there not an all position rifle , this critique is all I can think of . Otherwise pay attention to torque specs use quality wrenches and you can rest assured this will be a foundation to work from .
Stiller Tac338 in a Strike Lite Chassis any way
24" Pac-nor, Heavy Palma Barrel, fluted
Last edited:
So, you guys that run the cadex chassis. Do any of you run barrels that are heavy varmint contour or thicker?
Also,
Where’s the go to place to order one and get it in a timely manner?
If my barrel will work without clearance issues, I would be interested in picking up a field competition, big horn TL3 and one of the stealth brown colors.
Thanks for any and all help
Also,
Where’s the go to place to order one and get it in a timely manner?
If my barrel will work without clearance issues, I would be interested in picking up a field competition, big horn TL3 and one of the stealth brown colors.
Thanks for any and all help
Im running a proof bull (1.25”) with plenty of clearance in the dual strike. I’m not sure what the clearance is for their lighter profile chassis’
I’m running the M24 contour in the comp forend (which is slimmer than their standard). Clearance is fine. Pic is up a little higher on the thread......
Take a look on my set up from prior post here. Rifle with rattle can camo .
Bbl is 30" H.V. cut on both ends .
IMHO if you plan to build a 50 cal or egual dual strike is ample.otherwise field chassis will fit tighter 30 cal 6.5 6mm
[email protected]
Scott is a stand up guy . He knows all details regarding Cadex Defense.
You will not regret going with Cadex
Thanks everyone. Is the price increase for the lite competition worth it over the field competition?
Any one here have some pics of a surgeon action in a lite comp. I want to see if theres enough clearance for an arc barloc to access the screw, for the part to fit and if theres enough space for the recoil lug version. Thank you in advance
I do. I have a couple of the FDE ones with SKMR3 reticles. But sold one to try out the Minox ZP5 with MR4. I like the glass better on my ZP5 but it has the MR5. Want to give the MR4 reticle a go.
I also have two of the Kahles K624i, but i would really like to see the Minox.
Have heard only good word about those scopes.
Have heard only good word about those scopes.
Swapped the Kahles to another rig for the time being. ZP5's on it currently.
Last edited:
When I purchased my chassis Cadex chassis, they didn’t have much of a presence, the only pictures online were what Cadex had released. Since I needed a left hand chassis to fit a 338 action, it took a while to have the chassis made. But it was well worth the wait, Cadex attention to details really makes them a stand out.
Attachments
I was going to put a Remington 700 - 338 lapua into a Cadex Chasis, any recommendation on which one? Looks like a lot of peeps are doing the skeletonized chasis as well. better for price?
For the record, I don’t like the adjustments for cheek riser for the skeleton (too much per increment). Other than that, it’s great.
Here's my Surgeon 1086 300 Win Mag in Cadex Dual Strike with Jewell Trigger close up..... and it's for sale
I'm in Illinois, but will ship anywhere in the US as long as it's to an FFL. Here's the link I listed it under: https://www.snipershide.com/shootin...al-strike-300-win-mag-mint-condition.6900405/
A close up of my Rem 700 in 6.5 Creedmoor with a modified MPA grip. In what I call "caliche tan"
Hey Im new and just bought this chassis....What mags you use...What should I look for?
I used Magpul AI and Alpha mags without any issues. I think they should run any of the mags available.
Similar threads
