Suppressors Can you help me mount my suppressor?

[steve13]

i have a trash panda suppressor that I had hoped would work with a browning hells canyon in 6.5 creedmoor, the two cherry bomb adaptors that thread into the suppressor are supposed to be 5/8-24 and 1/2-28, the browning website says the rifle has 5/8-24 SR threads

is there an adapter that will work for me?

thanks

Q Trash Panda - Silencer Shop

Purchase the Q Trash Panda suppressor at Silencer Shop. This is a compact, titanium suppressor that sets the standard for quiet shooting. Purchase one today!

www.silencershop.com

 

[NWnewguy]

The 5/8"x24 cherry bomb should thread right on to the Browning. My friend has one and I'm pretty sure he just put a standard 5/8x24 AAC brake on it.

If that's not the ticket than maybe ask a little more specifically what you need help with.

 

[Threadcutter308]

i have a trash panda suppressor that I had hoped would work with a browning hells canyon in 6.5 creedmoor, the two cherry bomb adaptors that thread into the suppressor are supposed to be 5/8-24 and 1/2-28, the browning website says the rifle has 5/8-24 SR threads

is there an adapter that will work for me?

thanks

Q Trash Panda - Silencer Shop

Purchase the Q Trash Panda suppressor at Silencer Shop. This is a compact, titanium suppressor that sets the standard for quiet shooting. Purchase one today!

www.silencershop.com

There are male/female adapters F/S on fleabay.

 

[Waorani]

You're good w/ the 5/8x24 cherry bomb.

 

[steve13]

it seems that my rifle has metric threads (m13x.75), some hell's canyon owners say they have these and received a message from Browning that they are metric, others were told it is 5/8-24

the 5/8-24 cherry bomb adapter is large enough to slide well past the threaded section since the bbl is a much smaller diameter, it is much closer the the size of the 1/2-28 one

i will try to speak with Browning on monday to see what I have

thanks from the input

 

[Waorani]

That sucks. I'd dismissed the adapter idea as it sounded like 5/8x24 but looks like Browning went w/ oddball thread and adapters are available. And on ebay too as mentioned above.

M13x.75 to 5/8-24 Hell's Canyon Silencer Thread Adapter

www.thesilencerstore.com

M13X1.25 to 5/8-24 Hell's CanyonThread Adapter Silencer Adapter

www.thesilencerstore.com

 

[steve13]

i agree, especially since i checked their website before I bought it and saw it said 5/8-24..i assume they started metric but changed after negative feedback

if this is true, i am going to ask for a new bbl

 

[seawolfxix]

Do you have a link to the Browning page showing 5/8-24?

 

[steve13]

X-Bolt Hell's Canyon Speed – Suppressor Ready

www.browning.com

 

[Waorani]

The 5/8x24 "SR" seemed strange. Is SR just some cute marketing spin and simply means suppressor ready?

 

[PinesAndProjectiles]

Just a heads up. If you do go the eBay route, make sure and buy a suppressor alignment gauge.

You never know where the adapter is coming from and the last thing you want is a baffle strike.

 

[steve13]

browning confirms that i have m13x.75, what is the highest quality adapter so i can avoid any risk of a baffle strike?

 

[esw004]

You don't need adapters just run the 5/8 Cherry Bomb.

 

[NWnewguy]

You don't need adapters just run the 5/8 Cherry Bomb.

He's probably got this figured out by now, but he can't use the 5/8"x24 because his Browning is metric threaded.

I feel like I would give serious consideration to taking the rifle to a smith and have the old threads parted off and then rethreaded to 5/8"x24. Will be interesting to hear what he ended up doing.

 

[BIGREDGEORGIA]

browning confirms that i have m13x.75, what is the highest quality adapter so i can avoid any risk of a baffle strike?

Did you ever decide which way to go with this? I'm having the same issue with my Xbolt Pro...

 

[Jtl4pr]

Keep in mind there are multiple versions of the Browning Hell’s Canyon. The version that is suppressor ready (SR) has the 5/8-24 threads for direct threading capability. The other versions of the rifle will have a metric muzzle brake requiring an adapter - most likely M13x1.25 female to 5/8-24 male adapter

i have a trash panda suppressor that I had hoped would work with a browning hells canyon in 6.5 creedmoor, the two cherry bomb adaptors that thread into the suppressor are supposed to be 5/8-24 and 1/2-28, the browning website says the rifle has 5/8-24 SR threads

is there an adapter that will work for me?

thanks

Q Trash Panda - Silencer Shop

Purchase the Q Trash Panda suppressor at Silencer Shop. This is a compact, titanium suppressor that sets the standard for quiet shooting. Purchase one today!

www.silencershop.com

 

[Odindad]

Browning also makes a Hell’s Canyon Long Range. It has 5/8-24 threads but the muzzle diameter is really too small . It doesn’t have much of a shoulder. Definitely not enough for the cherry bomb . Browning totally screwed up the situation. The SR version has a sporter barrel that flares at the muzzle to give you a good shoulder.

 

[Jtl4pr]

Agreed. I’m going to try an adapter for mine but I think you are right about not enough of a shoulder. Hope it will seat enough but may have just been a waste of money. Kicking myself for not being a thousand percent sure of what I was buying. Too many versions of the rifle and didn’t pay close enough attention to the product numbers. I should have known better.

 

[HansohnBrothers]

Agreed. I’m going to try an adapter for mine but I think you are right about not enough of a shoulder. Hope it will seat enough but may have just been a waste of money. Kicking myself for not being a thousand percent sure of what I was buying. Too many versions of the rifle and didn’t pay close enough attention to the product numbers. I should have known better.

Contact Morgan at class3machine to cut and thread 5/8x24 Q/SIG taper spec. If the barrel taper is too thin, may be able to get by with 1/2x28 thread.