Re: CDI Precision Savage DBM feeler...
Guys, since we had plenty of interest you can just give Jeff a ring and order your DBM when you like. We just needed a sufficient amount of orders up front for him to justify the time & material to do them. These should be a normal order item from CDI Precision from here on out.
Luvman, these are going to use the AICS mags, don't think the AW mags would work without serious modification to the rifle... I'll double check on that and let you know though.
Gregg
Guys, since we had plenty of interest you can just give Jeff a ring and order your DBM when you like. We just needed a sufficient amount of orders up front for him to justify the time & material to do them. These should be a normal order item from CDI Precision from here on out.
Luvman, these are going to use the AICS mags, don't think the AW mags would work without serious modification to the rifle... I'll double check on that and let you know though.
Gregg
Re: CDI Precision Savage DBM feeler...
Any idea about when you can make one for pre-accutrigger 110's?
Any idea about when you can make one for pre-accutrigger 110's?
Re: CDI Precision Savage DBM feeler...
Kilo, we haven't discussed doing one for the long actions yet. I can ask Jeff about it next time I talk to him, or you can drop him a PM on here and see what he says. Pretty sure he'd like to have a quantity of 10 or better like we did on the short action DBMs... never know until you ask though!
Thanks,
Gregg
Kilo, we haven't discussed doing one for the long actions yet. I can ask Jeff about it next time I talk to him, or you can drop him a PM on here and see what he says. Pretty sure he'd like to have a quantity of 10 or better like we did on the short action DBMs... never know until you ask though!
Thanks,
Gregg
Re: CDI Precision Savage DBM feeler...
I was curious about the AW mags because savage originally had double stacked internal mags. It'd be sweet if it were relatively simple to get AW mags to work. Either way there is a CDI DBM in my rifle's future!
I was curious about the AW mags because savage originally had double stacked internal mags. It'd be sweet if it were relatively simple to get AW mags to work. Either way there is a CDI DBM in my rifle's future!
Re: CDI Precision Savage DBM feeler...
Hi Guys. Final prototype is done and works perfect. I will go into production this upcoming weekend and have parts within 2 weeks(anodizing takes about a week). The one I have done is the Center feed newer model, (4.40 Bolt Spacing). I will work this week on the stagger feed model. IT will be similar just a few tweeks. Using AI-AW mags is something I will look into. Tried it on the FN-SPR, but the action requires too much cutting. This may be a bit different.
The pic if the stock shows slight additional trimming the stock requires. It is easy and minimal to make it fit..
Here's some pics
Hi Guys. Final prototype is done and works perfect. I will go into production this upcoming weekend and have parts within 2 weeks(anodizing takes about a week). The one I have done is the Center feed newer model, (4.40 Bolt Spacing). I will work this week on the stagger feed model. IT will be similar just a few tweeks. Using AI-AW mags is something I will look into. Tried it on the FN-SPR, but the action requires too much cutting. This may be a bit different.
The pic if the stock shows slight additional trimming the stock requires. It is easy and minimal to make it fit..
Here's some pics
Re: CDI Precision Savage DBM feeler...
I will be planning on production of the pre paid orders and a few extra.. if you want one of the first run, hit me up.. otherwise you may have to wait a couple more weeks..
I will be planning on production of the pre paid orders and a few extra.. if you want one of the first run, hit me up..
otherwise you may have to wait a couple more weeks..
Re: CDI Precision Savage DBM feeler...
Jeff that looks awesome, just as I expected. I can't wait for mine!!!!!!!
Jeff that looks awesome, just as I expected. I can't wait for mine!!!!!!!
Re: CDI Precision Savage DBM feeler...
I think that once people get these up and running, there will be a lot others coming forward and wanting one.
Like Me!
+1 on center feed
I think that once people get these up and running, there will be a lot others coming forward and wanting one.
Like Me!
+1 on center feed
Re: CDI Precision Savage DBM feeler...
That looks awesome Jeff. totally worth the wait to me! Is that a 5 rd mag in the pic? If so a 10 rounder will make the latch look more proportionate... I'd leave it long for the guys running the 10 round mags. Looking forward to the staggerfeed models & the 223 mags!!!
Gregg
That looks awesome Jeff. totally worth the wait to me! Is that a 5 rd mag in the pic? If so a 10 rounder will make the latch look more proportionate... I'd leave it long for the guys running the 10 round mags. Looking forward to the staggerfeed models & the 223 mags!!!
Gregg
Re: CDI Precision Savage DBM feeler...
I agree with Gregg. the latch looks like it will be fine with the 10 rounders. by the way Jeff it do's look Awesome. great job. Eugene
I agree with Gregg. the latch looks like it will be fine with the 10 rounders. by the way Jeff it do's look Awesome. great job. Eugene
Re: CDI Precision Savage DBM feeler...
Friggin awesome!!!! I'm workng on getting my pennies in order and awaiting news on the AW mag possibility.
Friggin awesome!!!! I'm workng on getting my pennies in order and awaiting news on the AW mag possibility.
Re: CDI Precision Savage DBM feeler...
Excuse my manners, the only thing I said was the tab looked too long to me, and forgot to say how bad ass the dbm looks. Makes me want to buy a Savage just to try one out. Good job!
Excuse my manners, the only thing I said was the tab looked too long to me, and forgot to say how bad ass the dbm looks. Makes me want to buy a Savage just to try one out. Good job!
Re: CDI Precision Savage DBM feeler...
No worries.. its the same lever I use for everything else. IT isnt that long in person. its pretty hard to hit inadvertently. thanks for the kudos..
No worries..
its the same lever I use for everything else. IT isnt that long in person. its pretty hard to hit inadvertently. thanks for the kudos..
Re: CDI Precision Savage DBM feeler...
Very nice work! Please keep us informed when the staggered feed is completed. I have a Manners T4 being put together, one of these would complete my build.
Very nice work! Please keep us informed when the staggered feed is completed. I have a Manners T4 being put together, one of these would complete my build.
Re: CDI Precision Savage DBM feeler...
Concidering staggerfeed was the reason for this thread in the first place
Just kidding, nice work Jeff and I am impatiently waiting for mine. Thanks for doing this.
Concidering staggerfeed was the reason for this thread in the first place
Re: CDI Precision Savage DBM feeler...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mprtech</div><div class="ubbcode-body">Concidering staggerfeed was the reason for this thread in the first place
Just kidding, nice work Jeff and I am impatiently waiting for mine. Thanks for doing this. </div></div>
yep, This started out as a staggered feed build and was sold to me as such with center feed to come later
How it went from a staggered feed build to center feed I have no idea.
They do look good though!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mprtech</div><div class="ubbcode-body">Concidering staggerfeed was the reason for this thread in the first place
yep, This started out as a staggered feed build and was sold to me as such with center feed to come later
They do look good though!
Re: CDI Precision Savage DBM feeler...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Muddawg</div><div class="ubbcode-body">What is the pricing on one of these? Will it work in the HS Precision stock without inletting? Where do you get the magzines that work in it?</div></div>
Seriously.. take a few minutes to actually read the thread... or even just the first post.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Muddawg</div><div class="ubbcode-body">What is the pricing on one of these? Will it work in the HS Precision stock without inletting? Where do you get the magzines that work in it?</div></div>
Seriously.. take a few minutes to actually read the thread... or even just the first post.
Re: CDI Precision Savage DBM feeler...
I don't remember which one I said I would do first honestly, but I could buy a newer one quicker and had it here first. I have a stagger feed one here and it will only be a week behind the center feed.. no worries..
I don't remember which one I said I would do first honestly, but I could buy a newer one quicker and had it here first. I have a stagger feed one here and it will only be a week behind the center feed..
no worries..
Re: CDI Precision Savage DBM feeler...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mattj</div><div class="ubbcode-body">No worries. Grumpy morning. </div></div>
Cous, there's nothing grumpy about common sense.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mattj</div><div class="ubbcode-body">No worries. Grumpy morning. </div></div>
Cous, there's nothing grumpy about common sense.
Re: CDI Precision Savage DBM feeler...
I wish the trigger guard was a little thicker like CDI's R700 BDM. Even if it required more inletting, you might not need the rear screw.
I wish the trigger guard was a little thicker like CDI's R700 BDM. Even if it required more inletting, you might not need the rear screw.
Re: CDI Precision Savage DBM feeler...
Good News.. Im running BOTH the Stagger feed and Center feed right now. I should have them to the anodizer Monday. Then I have to make the levers. I can make them while the anodize is getting done.. were almost dome folks..
Good News.. Im running BOTH the Stagger feed and Center feed right now. I should have them to the anodizer Monday. Then I have to make the levers. I can make them while the anodize is getting done.. were almost dome folks..
Re: CDI Precision Savage DBM feeler...
I'm not sure what exactly this does, does it use AR15 magazines or something else? I wouldn't mind having a 20 or 30 round in my Savage 12fv.
I'm not sure what exactly this does, does it use AR15 magazines or something else? I wouldn't mind having a 20 or 30 round in my Savage 12fv.
Re: CDI Precision Savage DBM feeler...
I will give you the benefit of the doubt that you read the first post and just don't know what 'AI' means...
AI = Accuracy International -- AI mags are what most of the after-market DBM setup are using these days (badger, surgeon, CDI, etc). Even Seekins, who designed his own mag due to shortages of AI mags at the time he designed his DBM system is coming out with an AI mag version now that they are available again.
But yes, basically gives you a heavy duty trigger guard/detachable mag setup that uses AI mags.
I will give you the benefit of the doubt that you read the first post and just don't know what 'AI' means...
AI = Accuracy International -- AI mags are what most of the after-market DBM setup are using these days (badger, surgeon, CDI, etc). Even Seekins, who designed his own mag due to shortages of AI mags at the time he designed his DBM system is coming out with an AI mag version now that they are available again.
But yes, basically gives you a heavy duty trigger guard/detachable mag setup that uses AI mags.
Re: CDI Precision Savage DBM feeler...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GCMxVeGeTa</div><div class="ubbcode-body">I'm not sure what exactly this does, does it use AR15 magazines or something else? I wouldn't mind having a 20 or 30 round in my Savage 12fv.
</div></div>
It uses Thompson 50 round drums.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GCMxVeGeTa</div><div class="ubbcode-body">I'm not sure what exactly this does, does it use AR15 magazines or something else? I wouldn't mind having a 20 or 30 round in my Savage 12fv.
It uses Thompson 50 round drums.
Re: CDI Precision Savage DBM feeler...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mattj</div><div class="ubbcode-body">I will give you the benefit of the doubt that you read the first post and just don't know what 'AI' means...
AI = Accuracy International -- AI mags are what most of the after-market DBM setup are using these days (badger, surgeon, CDI, etc). Even Seekins, who designed his own mag due to shortages of AI mags at the time he designed his DBM system is coming out with an AI mag version now that they are available again.
But yes, basically gives you a heavy duty trigger guard/detachable mag setup that uses AI mags. </div></div>
Wouldn't AR mags be cheaper? Given they would lock into place differently...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mattj</div><div class="ubbcode-body">I will give you the benefit of the doubt that you read the first post and just don't know what 'AI' means...
AI = Accuracy International -- AI mags are what most of the after-market DBM setup are using these days (badger, surgeon, CDI, etc). Even Seekins, who designed his own mag due to shortages of AI mags at the time he designed his DBM system is coming out with an AI mag version now that they are available again.
But yes, basically gives you a heavy duty trigger guard/detachable mag setup that uses AI mags. </div></div>
Wouldn't AR mags be cheaper? Given they would lock into place differently...
Re: CDI Precision Savage DBM feeler...
They would be cheaper alright, but not possible. The mags are too wide and hold 223 rounds... we're dealing with 308 rifles here. It's best to use magazines specifically designed for bolt guns.
They would be cheaper alright, but not possible. The mags are too wide and hold 223 rounds... we're dealing with 308 rifles here. It's best to use magazines specifically designed for bolt guns.
Re: CDI Precision Savage DBM feeler...
To all you go fast guys.. check this post out..
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1281582&#Post1281582
To all you go fast guys.. check this post out..
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1281582&#Post1281582
Re: CDI Precision Savage DBM feeler...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CDiPrecision</div><div class="ubbcode-body">To all you go fast guys.. check this post out..
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1281582&#Post1281582 </div></div>
How do you handle the steel front pillar in your MCM? Did you just mill it off?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CDiPrecision</div><div class="ubbcode-body">To all you go fast guys.. check this post out..
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1281582&#Post1281582 </div></div>
How do you handle the steel front pillar in your MCM? Did you just mill it off?
Re: CDI Precision Savage DBM feeler...
There is no pillar in the McMillan I have here.. it is a factory A5..What area do u mean?
There is no pillar in the McMillan I have here.. it is a factory A5..What area do u mean?
Re: CDI Precision Savage DBM feeler...
I think mine is the same as 858's. It is an A3 with the blind mag. Has one pillar on the front mount bolt.
Can you inlet my blind mag stock with pillar to work as your example?
It's got the accu-trigger so I'm pretty sure mine is the center feed.
I think mine is the same as 858's. It is an A3 with the blind mag. Has one pillar on the front mount bolt.
Can you inlet my blind mag stock with pillar to work as your example?
It's got the accu-trigger so I'm pretty sure mine is the center feed.
Re: CDI Precision Savage DBM feeler...
If theres a pillar I will either knock it out or cut it(as long as its glued in tight I can cut it).
Yes Blind mag stock is not a problem.
If theres a pillar I will either knock it out or cut it(as long as its glued in tight I can cut it).
Yes Blind mag stock is not a problem.
Re: CDI Precision Savage DBM feeler...
Yeah, my A3 has a steel pillar in the front. I highly doubt it can be knocked out since I 'fixed" it.
Yeah, my A3 has a steel pillar in the front. I highly doubt it can be knocked out since I 'fixed" it.
Re: CDI Precision Savage DBM feeler...
Yeah mine came loose after a year but some epoxy fixed that.
Yeah mine came loose after a year but some epoxy fixed that.
Re: CDI Precision Savage DBM feeler...
Jeff, did you start the DBM project with an A5 all ready inletted for a Savage detachable mag setup? The blind mag A5 that I have, has a front pillar and a brass nut-sert at the rear for the trigger guard.
Jeff, did you start the DBM project with an A5 all ready inletted for a Savage detachable mag setup? The blind mag A5 that I have, has a front pillar and a brass nut-sert at the rear for the trigger guard.
Re: CDI Precision Savage DBM feeler...
Yes, it was already inletted. I bought a factory Savage McMillan A5 equipped rifle.
My DBM uses the factory inlet for the newer center feed Savage DBM units. just needs a little trimming with a dremel.. easy install if you have an existing DBM rifle from savage.
Yes, it was already inletted. I bought a factory Savage McMillan A5 equipped rifle.
My DBM uses the factory inlet for the newer center feed Savage DBM units. just needs a little trimming with a dremel.. easy install if you have an existing DBM rifle from savage.
Similar threads
