I was wondering if anyone has any experience with the air cure version of Cerakote? Is the application any different? How does it hold up? Also, since it doesn't require heating can it be used on polymer parts? Any info you can provide is greatly appreciated. I looked through the forums and did a few searches but didn't find anything on the air cure type so forgive me if I just overlooked a thread with this in it.
-
Having trouble using the site?
Contact support
Gunsmithing Cerakote Air Cure
- Thread starter blaserman33
- Start date
Re: Cerakote Air Cure
We use it.
Its not a two part like the H.
You spray it on and let it air cure for 5 days.
IMO it continues to dry/harden over about 30 days. Could be wrong but month old Cerakote seems tougher than 5 day old Cerakote.
Yes it can be used on stocks, scopes, plastic, anything you can get it to stick to since no heating is required.
It does seem to like sand blasted metal the best though.
We use it.
Its not a two part like the H.
You spray it on and let it air cure for 5 days.
IMO it continues to dry/harden over about 30 days. Could be wrong but month old Cerakote seems tougher than 5 day old Cerakote.
Yes it can be used on stocks, scopes, plastic, anything you can get it to stick to since no heating is required.
It does seem to like sand blasted metal the best though.
Re: Cerakote Air Cure
Do the polymer pieces need to be blasted? If so, should I use a different type of blast media?
Do the polymer pieces need to be blasted? If so, should I use a different type of blast media?
Re: Cerakote Air Cure
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: blaserman33</div><div class="ubbcode-body">Do the polymer pieces need to be blasted? If so, should I use a different type of blast media? </div></div>
I've done a couple Glock frames and I lightly blasted them with the same 100 grit AO media I use for metal.
Seemed to work out just fine.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: blaserman33</div><div class="ubbcode-body">Do the polymer pieces need to be blasted? If so, should I use a different type of blast media? </div></div>
I've done a couple Glock frames and I lightly blasted them with the same 100 grit AO media I use for metal.
Seemed to work out just fine.
Re: Cerakote Air Cure
I did my whole rifle, minus optics. Sand blasted everything from metal to plastic and it's held up great. What I like is that you can touch it after a few hours and put it in the safe, but best to let it cure for the 4-5 days depending on weather of course.
I may experiment with the H Series down the line, but air cure has worked very very well for me in the past.
I did my whole rifle, minus optics. Sand blasted everything from metal to plastic and it's held up great. What I like is that you can touch it after a few hours and put it in the safe, but best to let it cure for the 4-5 days depending on weather of course.
I may experiment with the H Series down the line, but air cure has worked very very well for me in the past.
Similar threads
Suppressors
9mm Carbine Can??
