Depriming Lapua SRP brass - issue resolved, thanx to those who replied.

[LG65CM]

Looking for suggestions for a hand held tool that I can deprime my Lapua 6.5mm SRP brass with. TIA, lg

 

[longgunJR]

Here's a popular choice

Amazon.com : Frankford Arsenal Platinum Series Hand Deprimer Tool for Standard Primer Removal for Reloading - 909283 : Gateway

Amazon.com : Frankford Arsenal Platinum Series Hand Deprimer Tool for Standard Primer Removal for Reloading - 909283 : Gateway

www.amazon.com

 

[spife7980]

Here's a popular choice

Amazon.com : Frankford Arsenal Platinum Series Hand Deprimer Tool for Standard Primer Removal for Reloading - 909283 : Gateway

Amazon.com : Frankford Arsenal Platinum Series Hand Deprimer Tool for Standard Primer Removal for Reloading - 909283 : Gateway

www.amazon.com

That franklin will work if it’s small primer regular flash hole like for a 223 but a br/x47 case etc will need the pin turned down to match the small flash hole diameter.

I don’t know if any hand held like that which are small pin diameter without filing them down yourself.

 

[LG65CM]

Thanx for reply Spife7980. I've got that tool . The Lapua brass I have is still loaded as I bought a few boxes of Berger ammunition and it is made using Lapua SRP brass. So can't try the tool out. I know a person can sand down regular sized deprimer pins. Though I would rather have a tool that has the size pin needed. I think the flash hole measurement on L SRP is 0.059".

 

[jbmarshtx]

Takes awhile...

Harvey Deprimer

Universal Hand Held Deprimer DEPRIMES LAPUA CASES! Buy Now No Accessories Needed No attachments, accessories, dies, or shell holders needed to catch spent primers. Deprimes Lapua Cases The 0.06″ Universal Pin, available for purchase, deprimes all major cases. Convenient Design Freedom from the...

harveydeprimer.com

 

[LG65CM]

Will look deeper into the Harvey. I did see where they sell the pins and specifically mention for Lapua's SRP. Thanx 'jb'.

 

[Forward543]

I use a lee universal in my press. I had to turn the pin down. Not hand held, but works.

 

[LG65CM]

Thanx Forward543, I have the Lee universal and really like it. But, am looking for a) hand tool method and b) where I don't need to sand or turn down the standard sized pins. So far the Harvey seems to fit the bill.

 

[BullzeyeNJ]

You can use a mighty armory decapping die with their small pin attached and a lee hand held press to do the job. Also gives you the option of moving the die to a single stage or progressive press in the future.

 

[LG65CM]

Thanx Bullzeye NJ. I gave up as I came across Hornady's universal deprime die and their SRP pin and ordered it ten minutes ago from Precision Reloading. I have the Frankfort hand tool for LR primers as well as Lee's universal decapping die/pin. So, I am at least now set up to deprime the Lapua SRP brass.

Thanx to all of you for your replies. lg