They usually waste no time cashing checks. But then, "waaaah, coooovid!!!" plus political bullshit plus holidays... Doesn't surprise me really. I've got one on paper dating from sometime in January or late December but used a CC so that was handled pretty much the day they got it.
I was checking to see if this was still active, and the code dropped it to 716.66use code tanboi and it drops the price to 766.00
Exactly, plus $10 for shipping, so I really couldn't resist. For 20 plus years I've owned zero cans (used to live in a state where they were prohibited). In the last week I've bought 2 (someone on another forum was selling used SIG 5.56 cans for $350 - LEO trade in). But given the political uncertainty, didn't really want to hold off any longer.
Same... All these years I've wanted them, and put them off. Then, I bought my first 3 after the election bullshit in Dec 2020... And I've bought 2 more since, because of the political bullshit. I'd rather be "in before the lock" than to not be able to get them later. Now all 5 are cashed and pending approval...So, I'm in the system.
My first 3 should be getting approved any day now. 
You've got a jump on me, but at least I'm starting the process. And with the political climate we're all having to deal with I'd rather spend the money now and have them in my possession when Biden tries to prohibit them rather than wait and be frozen out by the Dems. Hopefully anything already in the works will be grandfathered. 
They can't stop progress. And if they ever DID pass something prohibiting them, it would have to be after a predetermined date and time, and not just a "right this very minute" type of thing. When the Democrats and Charlie [butt]Rangel[er] cheated on the vote and illegally passed the Hughes Amendment with no sunset clause, they had determined that nothing submitted after May 19, 1986 would be allowed. So you had a few days to rush to get your Form 1's or Form 4's submitted to the ATF before they wouldn't be allowed to be legally converted or transferred/purchased to an individual.
Feel the same way about pistol braces. Rather have one now and make the dems. try and figure out a way to take it away from me than wait and watch them prohibit/require ATF approval of future purchases.
And thanks again to this forum for helping me find a good deal on a suppressor I've always been planning on buying anyway.
It really should be put at the front of the cue for the $200 they charge for the “privilege.”
I actually don't feel bad about it as my expectations are set low. haha Seriously, I knew what I was getting into.
Thank you so much. I promise, no more home movies, but this is Mom (we aren't together but we are still very good friends), son, son's GF, and fat ass me. One of the most happy days of my life. He's a terrific young man.
Exactly! But it's even more asinine that the firearms "accessory" gets charged a tax and requires extra hoops and paperwork in the first damn place, and the gun itself can be bought and transferred INSTANTLY with a 4473 and a NICS check. I'd venture to say the firearm itself is more dangerous than a chunk of metal that is incapable of holding, chambering, or firing ammunition... The fact we even still have suppressors and barrel length laws on the NFA registry is bullshit.
This gives me hope!!! Now we're getting closer to my cash dates (12/29 and 12/31)! Fingers crossed they'll be coming back soon!
Same here, my cash dates were both 12/31. I called the ATF last week and they said "Pending" which I'm guessing means "In a large pile on someone's desk".
Pretty much an accurate description of what "Pending" means when they tell you that.
Form 3 delivered to dealer on 11/24/2020
Where did you get the 1913 rail mount for the Magneto Speed? Will it fit a V2?Form 3 delivered to dealer on 11/24/2020
Tax stamp cashed on 12/15/2020
Took delivery of my OSS 762Ti today! 6/9/2021
Perfect timing as the rifle's first trip to the range was last weekend. Not a soul there but me for four hours straight. Simply awesome and managed to finish up every test so I can start hand loading. Cycles with subs and supers, no issue. Quickest dial-in I've ever had. And now she'll no longer be naked!
Came in at about 14.7oz. as my scale reads a few ounces high. Factory spec is 14.5. Can't wait to enjoy the sound of (relative) silence. This'll make a huge difference on the POF Revolution DI with a muzzle brake. The guy next to me at the range will be thankful!
Magpul makes the adapter for the Magneto Speed chrono? I'll have to look into that. Thanks.
No, they just make the m-lock rail. The Magneto Speed has a rail adapter purchased separately. I have the V3, not sure if it works with the V2. Sorry, misunderstood the question! https://magnetospeed.com/products/v3-rail-adapter
My approval date was April 19th but the postage date printed on the ATF envelope was May 7th. The dealer had it about 4 days later.
Well, I have plenty of space to shoot on my property right outside the door. But let me tell you it's enormously time consuming owning acreage. Bush hogging. Fixing broken bush hog or tractor. Hours mowing the"yard". Pole saw action on infringing branches. It doesn't end. But I wouldn't give it up for anything.
Dead Air has great customer service. If it's just the end-cap, and the baffles appear to be aligned perfectly, then that should be a cheap easy fix for them...Just send you a new cap. If you don't already have the Sandman/Nomad end cap tool, go ahead and get you one. It will let you remove/install without marring or scratching your end cap or suppressor finish.
It's probably just his end-cap. He says the baffles appear to be aligned perfectly, so and end cap is a quick easy fix. Just screws on/off.
It's probably just his end-cap. He says the baffles appear to be aligned perfectly, so and end cap is a quick easy fix. Just screws on/off.
