Still waiting on my barrel, but whidden 6gt bushing FL sizer and "The Seating Die" from SAC.
GA Precision 22 GT
- Thread starter psinclair
- Start date
You should be able to up that speed i would think. My 22br ran up to 3150 with the 88's and 31.5 grains n550. I backed it down to 3020 and 30.3 grains where i found a good load. My barrel is 23".
22Gt and 22-250 should be exceeding the BR quite easily
What is the oal of the 22gt? Could a person run one in an ar15?
Wanting to build a couple better .22 cal rifles, same caliber for in a bolt and ar15. Been looking into a 22br, 22 grendel and a 22gt. What are the case lengths and oal case lengths for all 3? I think the gt would be sweet but not sure if it’s an ar15 capable cartridge.
Wanting to build a couple better .22 cal rifles, same caliber for in a bolt and ar15. Been looking into a 22br, 22 grendel and a 22gt. What are the case lengths and oal case lengths for all 3? I think the gt would be sweet but not sure if it’s an ar15 capable cartridge.
I think so. Its still early on this barrel and I switch to N555 powder due to availability. Problem with N555 is the charge approaches being compressed around 38.0 grains. I was using H4350 early on but powder was very low. Also, ran non-magnum primers. Still working on it, but its good enought to shoot coyotes for now.
I’m getting ready to ask a place on Facebook. Baldwin gun works do the grendel and I seen a post about them doing a 6gt in a ar15. That’s way I asked the question here about a 22gt in a ar15…..figured someone surely would know more here.
Hate the 22 nosler brass trasher and I have a Valkyrie but it’s so damn finicky to the point it’s not that fun to reload for. I pissed away a lot of time, resources and components just in my bolt gun to find what works so so and I’ve seen what experienced ppl gone through to try and get an ar15 in that chambering to shoot…….I will never have an AR Valkyrie. I’m looking for something faster with better brass even though I have probably 300-400 once fired starline brass. If I could seek out of the Valkyrie I probably would. I have a love/hate relationship with the Valkyrie.
Someone in the gt fb group has posted about a gt on the ar15 platform that they put together.
If you cant find Varget, I'm running 37.2gr of Winchester Staball 6.5 pushing 88ELDs at 3115fps. It's a laserbeam. Hit at 1016 yds at a match Saturday.
How long's your barrel?
Anxiously awaiting my 16*er to arrive this week from Straight jacket
