GAP #6 Contour weight?

[5RWill]

Wondering what the weight of a GAP#6 is, specifically cut to 23? Or full size is fine. Looking at getting a GAP #6 from Bartlein or a LV modified. The LV modified is 1.200x2.00 and finishes at .900 at the muzzle and weighs 5.7lbs, i imagine a decent bit heavier than the GAP #6. I realize the GAP#6 is sort of like the Sendero/Varmint contour but with a 1.5" longer shank and finishes at .900 at 26" but i wonder how much weight that adds over a regular Sendero/Varmint?

 

[nso123]

Bartlein Barrels, Inc. - Contours

Looks like 6.5 pounds at 26 inches.

 

[tigerfan_9]

Plug in various contour specs here to see the weight difference.

PAC-NOR Barreling, Inc. - Barrel Contours

The bartlein HV #6 is not the same thing as a gap #6

 

[5RWill]

Where does it display the weight? Or does it not work on phones?


Sent from my iPhone using Tapatalk

 

[tigerfan_9]

Fill in data and look to right for "custom contour".

 

[5RWill]

I see now thanks.

 

[bkw1911]

my gap 260 had a #6 finished at 26in on a rem 700 in a McMillan A5 and the whole setup without the scope weighed right at 10lbs.

 

[A10XRIFLE]

GAP# 6 is a Remington Varmit with a 1" longer Breach and a .900" muzzle. Its like a Tubb Contour. Its about 1/2 pound heaiver than a remington varmit

 

[5RWill]

GAP# 6 is a Remington Varmit with a 1" longer Breach and a .900" muzzle. Its like a Tubb Contour. Its about 1/2 pound heaiver than a remington varmit

That's what I was wondering thanks George. Cutting it at 23 it would end up probably a good bit lighter than a LV modified at 5.7lbs.


Sent from my iPhone using Tapatalk