Gear/equipment wish list and new ideas

[317millhand]

Id like to start a wishlist thread, and hopefully some manufacturers or creative people will take notice. We all have something that we would like to have, but quickly realize that its not even produced yet. . Have an interesting idea? Post it up as well.

I'll start with a minor item.

I'd like to see a low profile snap on cover for the Hawk Hill Talon Bipod feet. Something with a rubber foot. Using chair leg covers, is big and looks ridiculous.

 

[b6graham]

2 stage TT diamond

 

[Sniperstud]

.223 conversion kit for AI rifles. I know. I’ve read the threads on why this might not be feasible, or even possible, but I still want it.

 

[WB300]

[QUOTE="317millhand, post: 7468338, member: 52411"
I'd like to see a low profile snap on cover for the Hawk Hill Talon Bipod feet. Something with a rubber foot. Using chair leg covers, is big and looks ridiculous.[/QUOTE]

I'll 2nd this request for a pair of Talon feet rubbers.

 

[steve123]

223 AI - AICS mags that'l take a 2.650" length cartridge because we have the 88-95 grains bullets that are almost equal to the 6's and 6.5's in wind drift and only use 24-25 grains of powder.

 

[OzzyO20]

Another vote for an AI 223 conversion. I'd love to he able to throw a 223 AI barrel on my AI AT to practice with and save my match barrel. I am not aware of the previous discussion of why it's not possible, but if the M24 worked as a LA 308, seems doable.

 

[Grog11]

Atlas Bipod feet that are actually tiny little game changers (for maximum stability, of course).

 

[Grog11]

More seriously, though, maybe some reinforced polymer bipod claws (think magpul or something). More alternatives that don’t cost $80 a pop cuz they are ultra-CNC’d-stainless-to-mostly-just-stick-in-dirt-and-wood. I understand the buy once cry once mentality, but it would be nice to have some cheaper alternative ploy claws.

 

[Hollywood 6mm]

[QUOTE="317millhand, post: 7468338, member: 52411"
I'd like to see a low profile snap on cover for the Hawk Hill Talon Bipod feet. Something with a rubber foot. Using chair leg covers, is big and looks ridiculous.

That's why I run the PASS adapters on my Harris with the Atlas version Hawk Hill feet - pop the talons out, plug in rubber feet. Or spikes. Or leg extensions.

 

[317millhand]

That's why I run the PASS adapters on my Harris with the Atlas version Hawk Hill feet - pop the talons out, plug in rubber feet. Or spikes. Or leg extensions.

I do the same, but the pass adapter also adds more length to the bipod. minor issue, nonetheless

 

[Hollywood 6mm]

I do the same, but the pass adapter also adds more length to the bipod. minor issue, nonetheless

It's not much added, the equivalent of one notch on a BRM-S.Not sure about you, but I've never run one fully collapsed, so it doesn't cause me an issue.

 

[short_mag]

RRS mount for the Leica 2400 rangefinder (Like the one they make for the Sig...)

 

[xNF_9]

2 stage TT diamond

Try the Bix’n Andy TacSport Pro 2 stage. Great trigger and has multiple shoes to choose from. 2nd most used trigger in PRS this year.

 

[JimLee]

Something that visually blocks all the hairy asscracks I am forced to witness at matches. I know they make underwear, and belts, but they don't seem to work all the time.

 

[DaleGribble82]

Something that visually blocks all the hairy asscracks I am forced to witness at matches. I know they make underwear, and belts, but they don't seem to work all the time.

Hilarious ? ?. I’ll be heading back to NC on Friday. Looking forward to doing business with ya.

 

[ballistic1]

Something that visually blocks all the hairy asscracks I am forced to witness at matches. I know they make underwear, and belts, but they don't seem to work all the time.

Duluth Trading
https://www.duluthtrading.com/mens-longtail-t-short-sleeve-shirt-with-pocket-95587.html

 

[PBWalsh]

I’d like Nightforce or someone to make a tier 1 quality 2.5-10x32mm optic, FFP, Mil based reticle like the Mil-Quad/Mil-C/etc., 30mm tube, zero stop, 10 mil turetts, parralax from 25y - Infinity, sub 20oz.

Oh and same features, but in a 10x50mm fixed, 34mm maintube, sub 25oz.

And AI to sell actions only. That with a .223 bolt face would be great. MCS/MCM jump in and do an inlet for them.

 

[MarinePMI]

And AI to sell actions only. That with a .223 bolt face would be great. MCS/MCM jump in and do an inlet for them.

You may want to keep an ear open for AI's announcements this year...not exactly what you're asking for, but close.

 

[quiksilverj]

Id like to start a wishlist thread, and hopefully some manufacturers or creative people will take notice. We all have something that we would like to have, but quickly realize that its not even produce. Have an interesting idea? Post it up as well.

I'll start with a minor item.

I'd like to see a low profile snap on cover for the Hawk Hill Talon Bipod feet. Something with a rubber foot. Using chair leg covers, is big and looks ridiculous.

I'm a couple days out from releasing those talon cover feet actually. Building up some stock now. There is an issue with my site at the moment I'm working on resolving. Hopefully be fixed today.

www.jklprecision.com

 

[quiksilverj]

You may want to keep an ear open for AI's announcements this year...not exactly what you're asking for, but close.

When you say announcement this year. do you have a timeline?

 

[MarinePMI]

I don't think it'll be an "announcement" in the vein of the response I posted to PBWalsh. More like an "announcement" of a new offering that (if you read between the lines) is a path to what he is asking about (not .223 though).

Edit: There was an inadvertant post about this on the Hide, but it was pulled due to sensitivities from AI. I won't say more about it, since it is in AI's best interest to announce it AFTER other milestones have been met.

 

[b6graham]

Try the Bix’n Andy TacSport Pro 2 stage. Great trigger and has multiple shoes to choose from. 2nd most used trigger in PRS this year.

ive used one. not a fan at all

 

[PBWalsh]

I don't think it'll be an "announcement" in the vein of the response I posted to PBWalsh. More like an "announcement" of a new offering that (if you read between the lines) is a path to what he is asking about (not .223 though).

Edit: There was an inadvertant post about this on the Hide, but it was pulled due to sensitivities from AI. I won't say more about it, since it is in AI's best interest to announce it AFTER other milestones have been met.

Dang, must’ve missed the thread! AI and ARC are the two primary companies I wanna know about.

 

[Danattherock]

RRS makes nice arca bipod clamp with lever for Atlas, which I ordered last night. They should offer same direct mount option for Harris. The option now requires using all the Harris junk up top and I would prefer direct mount to Harris near center. You can buy RRS clamp with lever and add Sawtooth Rifles Harris adapter, to achieve this, but that part is sold out. For a reason...

 

[Danattherock]

Rubber or hard plastic?

www.jklprecision.com

View attachment 7009425

 

[quiksilverj]

Rubber or hard plastic?

Its more like a rubber. hardness is around 80 shore A so a little harder than a tire.

 

[Danattherock]

Great, main use for me would be car hoods, barrels, and kitchen table, lol. Look forward to ordering a set.

 

[quiksilverj]

Great, main use for me would be car hoods, barrels, and kitchen table, lol. Look forward to ordering a set.

Same for me haha. The talons are awesome but destroy everything they touch. They seem like they are staying on pretty solid so shooting off a bench or shooting mat would be good too. The only downside I've seen so far is that the Harris versions like to spin if you really load the bipod. working on something for this but not much I can do I don't think because its the notched legs themselves that spin.

 

[MarinePMI]

Boom! (Frank must have been watching this thread...)

https://www.snipershide.com/shootin...dition-release-for-shot.6923345/#post-7482478

 

[drwood96]

2 stage TT diamond

Coming soon!

 

[b6graham]

Coming soon!

ship date? price?

 

[quiksilverj]

All,

Got the first batch of the Talon covers done this morning. Making more as we speak. Can be ordered from the link below and I try to get all orders shipped by the next morning.

https://jklprecision.com/product/bipod-talon-covers/

Thanks,

Joel