-
Having trouble using the site?
Contact support
K-Bars Half-Face Blades enthusiasts thread
- Thread starter sirhrmechanic
- Start date
Nice job and a new treatment to boot, talented and luck getting it I’ll assume. HFB Innovation always in motion.
Last edited:
Heck noThat’s a nice collection but the Cavners don’t match with the closed tang. You should sell them to me so you can keep working on a matching set.
but I appreciate your smooth attempt Andy just sold $140,000 in blades in two minutes. I wanted one of the collectibles, but I just couldn’t put $2,500 down on a blade. Not today. Still some production DJs up.
I had an alarm set for today. Then the wife sent me to the store and I forgot....until I hit the parking lot and my alarm went off. 
Doubt I would have scored one anyway, but dang....
Doubt I would have scored one anyway, but dang....
Hello everyone. New member here and my first post. I just became aware of Half-Face Blades earlier today. On another forum a guy posted a pick of his Nighthawk alongside a Half-Face knife. A top gunsmith for Nighthawk commented how he loved Andy's work. So I thought let's check this out. When I looked into it a bit I learned he's just another one of those small custom makers who can't keep up with demand with a crazy secondary market. They're cool knives but I don't do drops, lottos, or auctions. I never really understood what it is about knives that make people lose their friggin mind. Maybe it's the Unobtanium factor. We want what we can't have.
I am in the same boat. I have an ordinary used one I bought from a guy on here, but have been wanting a "fancy" one.
I've tried every Saturday for months and can't get one. I really don't know how they can be all gone in 2 seconds. I actually had one in my cart this past weekend, but by the time I got to where you could proceed with payment, it vanished out of my cart. Fuck 'em. I'm done playing the game. There are a lot of other blade smiths out there who do excellent work.
It's pretty common with a lot of these small knife makers, unfortunately. Whether it's a lotto, drop, or auction it's mostly just an incredible waste of time. Try getting a Hawk Deadlock or a Holt Haptic. I've come to realize the only way to win this game is not to play,.
Gonna be a drop today at noon PST. Y’all start doing your finger exercises and stretching now so you don’t pull something trying to get one.
Since noone has posted... this is the set of Snipers Hide Team Patriot Hawks.
Handful of guys here started this project in 2020. They all got delivered in Feb/March.
They are scattered to the winds now. But here is the 'team' picture before they left the mothership.
Sirhr
Handful of guys here started this project in 2020. They all got delivered in Feb/March.
They are scattered to the winds now. But here is the 'team' picture before they left the mothership.
Sirhr
Not the biggest collection but I’ve got all the bases covered
Welp, thanks for turning me onto this HFB knife addiction. Fuckers! I've managed to pick up two production drop leftovers after I failed at getting whatever I was tryin for.
Big learning curve for sure. Not only do you have to fly through the pics and make your selection, but you have to win the cart war and then fill in CC info with lightning speed in order to not be sniped (I think) . You would think that if you won the cart war, checking out would not be a race too.
Kwaikens last sat were awesome. Yep, missed on those too. Fun for sure.
Big learning curve for sure. Not only do you have to fly through the pics and make your selection, but you have to win the cart war and then fill in CC info with lightning speed in order to not be sniped (I think) . You would think that if you won the cart war, checking out would not be a race too.
Kwaikens last sat were awesome. Yep, missed on those too. Fun for sure.
You may consider saving your CC information in your phone, if you feel comfortable. That will help on timing. I’ve never won a custom piece on the drop but I’ve grabbed a couple of decent productions.
I’ve got a couple for sale if you have anything specific you’re looking to grab.
Never used my phone for a purchase before. Heck, ive made like 10 fb posts in my life. Kids thought i should have a page cause i own a hardware store so its a “necessary” evil.
I need to learn.
Looking for knives to be used. Would like a few for butchering as well as a Bito and breacher. Doesnt need to have all the bells and whistles.
Let me know if you have anything along those lines.
I need to learn.
Looking for knives to be used. Would like a few for butchering as well as a Bito and breacher. Doesnt need to have all the bells and whistles.
Let me know if you have anything along those lines.
Got a combat filet that might be a good fit. Have a couple others. Will send you pictures via message and you can tell me what you think.Never used my phone for a purchase before. Heck, ive made like 10 fb posts in my life. Kids thought i should have a page cause i own a hardware store so its a “necessary” evil.
I need to learn.
Looking for knives to be used. Would like a few for butchering as well as a Bito and breacher. Doesnt need to have all the bells and whistles.
Let me know if you have anything along those lines.
New feather light
Stonewashed blade rock work
OD green and black scales with black carbon fiber pins
Leather and kydex sheaths
Stonewashed blade rock work
OD green and black scales with black carbon fiber pins
Leather and kydex sheaths
Recently a lot of fake accounts have popped up. Fake Half Face Blades accounts.
If you have a recent spam can you post a picture of the spam or just the logo.
If you have a recent spam can you post a picture of the spam or just the logo.
I am not an expert at knives. However, I am a man who respects hard work, being humble, and being a genuine person. I reached out to HFB a few weeks ago about a polished Crow Jr. I was able to grab one shortly after. More importantly though, I had the pleasure of meeting Andy, Kelsie, Crow, and his team a few days ago. He is truly one of the most humble and down to earth people you will ever meet. Took the time from his busy schedule to personally take me on a tour of the shop. He would pick up all sorts of blades in various production stages, talk about it, and hand them to me. Several one off customs and this guy just hands it to me and asks what I think. Stopped for 5 minutes or so talking to one of his guys about milling handles. I asked him questions about my particular one, knife/kydex care, and my purpose for the blade. Answered every question thoroughly. Andy has a small team that busts their asses to put out QUALITY tools. They do no stock pile finished tools to drive up demand. They just can't keep up the high demand that impatient customers complain about. Good things come to those who wait. Trust me.
Lucky you, congrats !….that’s a cool thing to get to do for sure. Would love to do that one day
It was crazy to hold some custom stuff for a few Team guys also. It's a small shop with a great team. Seeing the stuff in person is epic.
Never seems to fail,find my old ones everywhere. Hope you're enjoying my old scout and flag!
Got a few up for grabs for anyone interested. Should be very affordable versus the eBay mercenaries.
www.snipershide.com
SOLD - Reposted
Have a few from my collection for sale. Incredible edges and heft/hold. Combat Filet- never used, brown micarta, stonework, stone wash finish -$500 shipped Sold! Gula Gula- $575- super sharp, never used, micarta with inlays. Stonewash finish. Hunter/skinner- used on one white tail, $375...
www.snipershide.com
Yes brother still one of my favorites
… my custom order is up very soon so I finally get to choose.
Here's a custom paring/boning knife I had done with copper and Oosik. It shows well with my Colt and ivory.
Similar threads
