Have searched high/low here, Brownells/Sinclair, most of the usual suspects-anyone know where to dig up a modified case for Hornady OAL loaded length gauge for 6.5x47. Thanks for any leads.
Hornady modified case for 6.5x47 Lapua
- Thread starter bobke
- Start date
Re: Hornady modified case for 6.5x47 Lapua
Just send a spent case to Hornady and they will drill and tap the case for you. You'll need to include a return envelope with postage. I got mine back in less that 2 weeks.
Just send a spent case to Hornady and they will drill and tap the case for you. You'll need to include a return envelope with postage. I got mine back in less that 2 weeks.
Re: Hornady modified case for 6.5x47 Lapua
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mac37</div><div class="ubbcode-body">Just send a spent case to Hornady and they will drill and tap the case for you. You'll need to include a return envelope with postage. I got mine back in less that 2 weeks.
</div></div>
+1
You will have a modified case that is custom formed to your chamber.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mac37</div><div class="ubbcode-body">Just send a spent case to Hornady and they will drill and tap the case for you. You'll need to include a return envelope with postage. I got mine back in less that 2 weeks.
</div></div>
+1
You will have a modified case that is custom formed to your chamber.
Re: Hornady modified case for 6.5x47 Lapua
Or get these 5/16-32 tap and 19/64 drill and do it ur self
Or get these 5/16-32 tap and 19/64 drill and do it ur self
Re: Hornady modified case for 6.5x47 Lapua
Hornady may have one, I've ordered from them in the past when all vendors were out of stock. You might get it sooner this way, as they may fill their orders first?????
DV
Hornady may have one, I've ordered from them in the past when all vendors were out of stock. You might get it sooner this way, as they may fill their orders first?????
DV
Re: Hornady modified case for 6.5x47 Lapua
Thanks, guys. Off to Fastenal I go. Appreciate the heads up.
Thanks, guys. Off to Fastenal I go. Appreciate the heads up.
Re: Hornady modified case for 6.5x47 Lapua
must be 5/16-32, as an industry drill/tap chart i've got open right now shows 5/16-18/24/32-no 36, unless it's a proprietary thread. anyone care to throw in?
must be 5/16-32, as an industry drill/tap chart i've got open right now shows 5/16-18/24/32-no 36, unless it's a proprietary thread. anyone care to throw in?
Re: Hornady modified case for 6.5x47 Lapua
I went thru the same thing... all I could figure is its thread pitch was .70mm not the standard metric fine thread of .75
I got nowhere after that so i to am interested in this tap size.
I went thru the same thing... all I could figure is its thread pitch was .70mm not the standard metric fine thread of .75
I got nowhere after that so i to am interested in this tap size.
Re: Hornady modified case for 6.5x47 Lapua
aha.. could not find 5/16x36 but that translates to #8x36
http://www.travers.com/product.asp?eaprodid=105248%2D12%2D111%2D154&r=s&n=||Cutting%3A+H.S.S.+%26+Solid+Carbide||Taps||UserSearch%3Dblock+id+105248+and+class+level3+id+30238||AttribSelect%3DPitch%3D%2736%27
aha.. could not find 5/16x36 but that translates to #8x36
http://www.travers.com/product.asp?eaprodid=105248%2D12%2D111%2D154&r=s&n=||Cutting%3A+H.S.S.+%26+Solid+Carbide||Taps||UserSearch%3Dblock+id+105248+and+class+level3+id+30238||AttribSelect%3DPitch%3D%2736%27
Re: Hornady modified case for 6.5x47 Lapua
Both Sinclair and Brownells show "discontinued by manufacturer"-was the first place i'd checked.
Both Sinclair and Brownells show "discontinued by manufacturer"-was the first place i'd checked.
Similar threads
