Howa 1500 builds **post them**
- Thread starter stello1001
- Start date
Yeah those are impossible to find it seems like. The first link is OOS and the 2nd is just a reference.
I've looked before and never any luck.
Midway has the #23 in stock. Not sure if it would work on a .300 BO or not...
Nevermind. I'm an idiot. I saw #23 on their chart, but then realized all of them have #23 on the right hand side. Duh
Last edited:
Lemme go check it out and do some research.
Thanks for pointing that out.
If anybody else has some other suggestions, I'm all ears.
Yeah, I have one in .223 and .300BO. I'd rather have one that will fit both, but I'm not sure. I contacted PH, but I'm not holding my breath on a response...
Well technically they both use the same bolt face diameter so I think they should work for each other. Unless the rod guide extends all the way forward to the neck case of the chamber. In which case, the 300BO would most likely not fit in the 223, and would not fit on my grendels.
I never saw one advertised back when I started building rifles on the Mini action, so I bought some 6061 T6 aluminum tube & white delrin rod, and a brass bolt, set stuff up in the 3-jaw on my lathe, and turned one out for myself. More or less copied the commercial ones I've seen for Rem 700 actions, just scaled-down to fit the smaller Howa Mini. That was several years ago - I'd have thought someone like Possum Hollow would've started making something for them by now??
