I lusted for The Fix rifle; I just do not want the caliber I got.

It is a shame that more people are here to entertain their adolescent minded habits than it is men sharing their experiences.
It is also a shame that some of you are not available to be punched in the face. Their tendency to be disrespectful would decrease quite a bit.

Oh I'm available. I haven't been punched in the face in a while. I like a good punch in the face, its quite invigorating, really gets my blood flowing.
Where and when for this thing?
I gotta water the garden in a bit and do some more wiring so.....
Any time really. I can make time in between my other stuff.
 
Oh I'm available. I haven't been punched in the face in a while. I like a good punch in the face, its quite invigorating, really gets my blood flowing.
Where and when for this thing?
I gotta water the garden in a bit and do some more wiring so.....
Any time really. I can make time in between my other stuff.

Hi,

Well he is right North of you by about 2.5 hours AND he is an electrician so maybe he can help you run some wires down there in LA....

Sincerely,
Theis
 
1622923995450.jpeg
1622924039248.jpeg
1622924109771.jpeg
 
Comparing 1.5 MOA blasting ammo to 0.5 MOA match ammo

Smh

Yes for blasting ammo 308 is prolly cheaper.
yeah, even in the old days, fgmm was around $0.80/rd for me, but unless i am shooting something small or beyond 500 yards, m80 ball is fine for practice or fun. every patriot should have a .308 gun anyway, so if we end up fighting the blue helmets, we can use their ammo when they run away.
 
Except 6.5cm being more expensive and a ton harder to get components to load for it, and it's not a NATO round and not nearly as available as .308. And .308 does everything 6.5cm does to 1000yds but with a heavier bullet.

Other than that ....

Barring the current insane times, I never had trouble getting components to load for either... I'm also not a member of NATO, where I'm going to need to borrow some ammo from a neighboring country... the fact that's it's a NATO round isn't very helpful for the majority of shooters.

Hornady Match 6.5 ammo was easily available and not expensive... on par with FGMM 308.

6.5CM is flatter shooting and has less recoil. Practically speaking, who cares if it'a slightly heavier bullet? If you are a PRS shooter, that steel plate doesn't care. If you are hunting, 6.5CM is going to be effective enough across the same range of game you would hunt with a 308.

Times change... there is a reason competitions shooters and SOCOM are moving to 6.5cm
 
not for me. until recenty i could get new stock ppu m80 for less than $0.50, and back in 2017 i was able to get it for $0.30.
until last year, lots of folks could get old nato surplus for around $0.40, although accuracy is not always very good.
i can get 1.5moa or better with cheap ppu in my gas gun, which is good enough for zombies and short range duty.
this place is called snipers hide... most guys here do care about accuracy and not just blasting away ;-)
 
Hi,

Stand back boys................You might get "Dojo'd", lolol
View attachment 7640925

Also, just FWIW...ITAR has absolutely ZERO to do with you being able to operate armed overseas OR in the USA for that matter.
An export regulation does nothing in regards to being able to operate armed anywhere.
Only the host countries government can allow you to operate armed within its' borders.
View attachment 7640930

At least his garbage can lid is down, lolol
View attachment 7640928

Sincerely,
Theis

Oh my
Karate huh?
Dang good to know.
So I guess its alright i have a black belt in Karazy.....katiretool, kahammer, kaaxehandle, kanife, kaanyfuckingthingicanpickup against karate.
 
Hi,

Well he is right North of you by about 2.5 hours AND he is an electrician so maybe he can help you run some wires down there in LA....

Sincerely,
Theis

I dont think ill require his services. Someone could get hurt.

Besides....the news comes on at 4....I'll be out of pocket for at least an hour with that.
 
Last edited:
this place is called snipers hide... most guys here do care about accuracy and not just blasting away ;-)
lol, yeah i get it now. i was just thinking about myself as usual, and how i might use a super lightweight 12.5" barreled sbr with a suppressor.
i'd be at the range all operator af. :ROFLMAO:
 
Wait, what was that part about the-engineering suppressor baffles to make the harmonics go away from his barrel?

I’d go back and find it, but I am currently laughing too hard.

@GrumpyOleFart we let you have the last one and you did this to him...




I don’t think we can trust you with another just yet. But soon, ok?

Sirhr

I require constant supervision, I have a tendency to break things.😔
 
Hi,

Stand back boys................You might get "Dojo'd", lolol
View attachment 7640925

Also, just FWIW...ITAR has absolutely ZERO to do with you being able to operate armed overseas OR in the USA for that matter.
An export regulation does nothing in regards to being able to operate armed anywhere.
Only the host countries government can allow you to operate armed within its' borders.
View attachment 7640930

At least his garbage can lid is down, lolol
View attachment 7640928

Sincerely,
Theis
You are an amateur spook; I have not been there in over 9 years.
 
Hi,

What is funny is I actually MET you at KGI when you all first started talking about how you were going to setup security contracting company, manufacturing facility, etc etc in the Philippines...

You damn sure wasn't so tough then when I started lining out all the International violations you all were about to get yourself into, lolol

I was the one doing the investigation, hahahaha

Sincerely,
Theis
 
Hi,

What is funny is I actually MET you at KGI when you all first started talking about how you were going to setup security contracting company, manufacturing facility, etc etc in the Philippines...

You damn sure wasn't so tough then when I started lining out all the International violations you all were about to get yourself into, lolol

I was the one doing the investigation, hahahaha

Sincerely,
Theis
You met me at KGI?! Then you worked for KGI. I never misrepresented myself past, present or future to KGI or anyone else and if you worked for Larry, you were complicit in layers of deception to use me; KGI is the lowest of the low and that is a blatant fact!
I picked myself up, I made back and I prospered.
I should make a KGI thread.
 
You met me at KGI?! Then you worked for KGI. I never misrepresented myself past, present or future to KGI or anyone else and if you worked for Larry, you were complicit in layers of deception to use me; KGI is the lowest of the low and that is a blatant fact!
I picked myself up, I made back and I prospered.
I should make a KGI thread.
Again, you cowards hide behind your screens. Be something like men.
 
Hi,

What is funny is I actually MET you at KGI when you all first started talking about how you were going to setup security contracting company, manufacturing facility, etc etc in the Philippines...

You damn sure wasn't so tough then when I started lining out all the International violations you all were about to get yourself into, lolol

I was the one doing the investigation, hahahaha

Sincerely,
Theis
Wow, small world, isn't it?
 
It is a shame that more people are here to entertain their adolescent minded habits than it is men sharing their experiences.
It is also a shame that some of you are not available to be punched in the face. Their tendency to be disrespectful would decrease quite a bit.
Awesome!
I love it when keyboard warriors imply they want to assault people.
It's self aggrandisement, and totally impotent.
U3sA41kG5afuSRd543.gif
 
  • Like
Reactions: lash and Schütze
Barring the current insane times, I never had trouble getting components to load for either... I'm also not a member of NATO, where I'm going to need to borrow some ammo from a neighboring country... the fact that's it's a NATO round isn't very helpful for the majority of shooters.

Hornady Match 6.5 ammo was easily available and not expensive... on par with FGMM 308.

6.5CM is flatter shooting and has less recoil. Practically speaking, who cares if it'a slightly heavier bullet? If you are a PRS shooter, that steel plate doesn't care. If you are hunting, 6.5CM is going to be effective enough across the same range of game you would hunt with a 308.

Times change... there is a reason competitions shooters and SOCOM are moving to 6.5cm

And when they all do, and 6.5cm is as widely available ect... I will be happy to switch... until then, it's not worth it. The NATO thing means that the ammo will be widely available, and can be gotten from elsewhere if it really were needed. I like 6.5cm as much as the next guy, but if the last year has proven anything, it's been that 308 is easier to come by when things get scarce. Who knows what the future holds? I'd rather go into that future with .308 than 6.5cm if and until that changes.
 
Anyway, I think I'm in the clear.
I'm heading towards a year's ownership of my 6.5 Creedmoor.
No urge to grow a manbun.
No beard, or floral scented beard oil.
Still drinking real coffee.
My Babe is still my hottie, no sly glances towards hipster males, or uniformed men.

Am
I
Safe?
 
Anyway, I think I'm in the clear.
I'm heading towards a year's ownership of my 6.5 Creedmoor.
No urge to grow a manbun.
No beard, or floral scented beard oil.
Still drinking real coffee.
My Babe is still my hottie, no sly glances towards hipster males, or uniformed men.

Am
I
Safe?
Any cravings for the esence of Patchouli Oil ? :unsure: :whistle:
 
If it will shut you little whiney bitches up, how do I "move"a thread?
I went with GCC.

For the record; I am trying to ask for advice.
If you fucking Marine Corp rejects had any readong comprehension, that might be apparent.

What a typical bunch you wannabes are.
Joined Wednesday and already grew balls like this 🤣... I remember my first beer, ban cat's coming tough guy...
 
Ok im in out of the yard now. Watched the news down at the gate.
No action yet.
Neighbor came by asked what I was doing.
Told him watching the news and waiting on some dude from Prattville thats gonna slap my face.
Boy did he laugh his ass off.
Sat and waited with me a while till another neighbor showed up with the beer. Decided we might as well empty the cooler.
 
Ok im in out of the yard now. Watched the news down at the gate.
No action yet.
Neighbor came by asked what I was doing.
Told him watching the news and waiting on some dude from Prattville thats gonna slap my face.
Boy did he laugh his ass off.
Sat and waited with me a while till another neighbor showed up with the beer. Decided we might as well empty the cooler.
Was Boomhower there, Hank? How’s Peggy?
 
  • Like
Reactions: Stevo86