Suppressors Interesting offer for the knife builder...

[RollingThunder51]

This came across my desk a few days ago. It is rare that one can purchase these items made from these materials. For those of you in the process or considering a knife project with a waterproof hollow handle, this is a good leg up. Before somebody suggests that tang less tubes are inherently weak, please be assurd that issue was resolved in the late 70's. Yes, the tube is threaded out on both ends.

Nice stuff this..

http://store.martinknives.com/auto/detai...artinknives.com

 

[Silverbullet2]

Re: Interesting offer for the knife builder...

Thoes are lice looking! I might just try them as bar ends for a cruizer bike. I just don't have a knife project right now.

 

[fast freddy]

Re: Interesting offer for the knife builder...

whats the length of the tube?

 

[ScottACousino]

Re: Interesting offer for the knife builder...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fast freddy</div><div class="ubbcode-body">whats the length of the tube? </div></div>

<span style="color: #3333FF"><span style="font-weight: bold">From the link above</span></span>

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">These are the same hollow handles that we put on our MCEII as well as other hollow handle knives we make. It comes without the compass. If you want a compass it is another $5. If you want the compass and us to epoxy it in for you then add another $10.

Measurements:
304 Stainless Steel Tube threaded on both ends 4" overall length with .825 diameter bore. Thread size: 7/8-18 UN

6061 Aluminum Buttcap threaded 7/8-18 UN thread. The O-ring is: 3mm inside diameter and 20mm outside diameter.

The compass is a BCB.</div></div>