J Jdaniel343 Sergeant Full Member Minuteman Mar 28, 2011 236 0 71 Casper,WY 82601 Mar 12, 2013 #1 Mar 12, 2013 #1 Is it necessary to uniform the primer pockets on Lapua brass?
avidflyer Sergeant Full Member Minuteman Mar 18, 2011 826 113 St Louis Mar 12, 2013 #2 Mar 12, 2013 #2 On Lapua I never touch them.... take a good look, they should be almost perfect. (no such thing as perfect). Now Winchester ..... always....
On Lapua I never touch them.... take a good look, they should be almost perfect. (no such thing as perfect). Now Winchester ..... always....
ChrisGarrett Gunny Sergeant Full Member Minuteman Feb 2, 2007 2,278 85 63 Miami, Florida Mar 12, 2013 #3 Mar 12, 2013 #3 Jdaniel343 said: Is it necessary to uniform the primer pockets on Lapua brass? Click to expand... Yes and also deburr the flash holes, in my opinion. Lapua's QC has been up and down over the past few years and you'll only have to do those chores once. Chris
Jdaniel343 said: Is it necessary to uniform the primer pockets on Lapua brass? Click to expand... Yes and also deburr the flash holes, in my opinion. Lapua's QC has been up and down over the past few years and you'll only have to do those chores once. Chris
McCrazy Your tax $$$ no longer at work. Full Member Minuteman Jun 4, 2008 1,114 193 Texas Mar 12, 2013 #4 Mar 12, 2013 #4 I agree with Chris. It may not make a difference but your uniformer will remove brass from some pockets that are out of spec. I also deburr the flashholes and sometimes can feel junk getting cut off. Is quick and easy so why leave the doubt..
I agree with Chris. It may not make a difference but your uniformer will remove brass from some pockets that are out of spec. I also deburr the flashholes and sometimes can feel junk getting cut off. Is quick and easy so why leave the doubt..
L lightman Sergeant Full Member Minuteman May 18, 2009 1,460 745 67 England, ar Mar 12, 2013 #5 Mar 12, 2013 #5 I agree with Chris and Mc. To me, its too easy not to do. Lightman
thrusty Patriot Full Member Minuteman Mar 14, 2012 1,496 13 Hedgesville, WV Mar 12, 2013 #6 Mar 12, 2013 #6 No matter who made the brass, I always prep it the same as any other to maintain consistency. +1 to all the guys above who do the same.
No matter who made the brass, I always prep it the same as any other to maintain consistency. +1 to all the guys above who do the same.
McCrazy Your tax $$$ no longer at work. Full Member Minuteman Jun 4, 2008 1,114 193 Texas Mar 13, 2013 #7 Mar 13, 2013 #7 I like your rifle by the way Thrusty. I have one that could be it's brother.