Ok boys and girls, I'm looking for the finer points of shooting a right handed action as a left handed shooter. Specifically, I'm talking about the effect of taking the support hand(right) off the rear support/bag to run the action.
What I'm noticing is that my groups are generally about 1/4 moa in vertical spread, but the horizontal spread is greater, generally 3/4 moa. I realize there are other factors that could cause horizontal spread, but I'm noticing that every time I run the action I have to rebuild my position because I lose my rear support.
This is an issued rifle and my personal guns are either left handed or semi autos so I've never paid much attention to this. Any ideas on how to mitigate the issue of losing my position? Weapon info below. As a reminder, it's an issued weapon. I'm limited to an extent on gear.
Rifle: FN SPR A5m .308
Optic: Vortex Viper PST 4-16 Gen I
Ammo: Hornady TAP 168gr ELDm
Bipod: MDT Ckye pod with sling stud mount and spiked feet
Rear Bag: Waxed Canvass Gamechanger with GitLite fill
Suppressor: YHM Phantom .30 cal
Still reading? Well, as background info, I struggled for a while to keep the groups from vertical "surprises". Some people call them "fliers" but I don't like that term. I was originally given a non-canting Harris bipod, but I recently switched to the Ckye Pod which seems to have cleaned that up. My personal rifles are an AI AT and Seekins SP10, and I would generally consider myself to be a 1 to 1/2 MOA shooter. Honestly, I rarely shoot anything tighter than that and consider a 1/2 group to be a good day. But when I first got this rifle I was happy to shoot 1 MOA. 1 1/2 MOA was not uncommon. I've been gradually refining things and eliminating issues like rifle setup etc. Just trying to be consistent with this gun.
Finally, if you want to tell me that I just suck and need to work harder that's fine too. I accept that this rifle shoots better than I do. Just looking for insight and I noticed a difference based on the action side and my left handed shooting.
What I'm noticing is that my groups are generally about 1/4 moa in vertical spread, but the horizontal spread is greater, generally 3/4 moa. I realize there are other factors that could cause horizontal spread, but I'm noticing that every time I run the action I have to rebuild my position because I lose my rear support.
This is an issued rifle and my personal guns are either left handed or semi autos so I've never paid much attention to this. Any ideas on how to mitigate the issue of losing my position? Weapon info below. As a reminder, it's an issued weapon. I'm limited to an extent on gear.
Rifle: FN SPR A5m .308
Optic: Vortex Viper PST 4-16 Gen I
Ammo: Hornady TAP 168gr ELDm
Bipod: MDT Ckye pod with sling stud mount and spiked feet
Rear Bag: Waxed Canvass Gamechanger with GitLite fill
Suppressor: YHM Phantom .30 cal
Still reading? Well, as background info, I struggled for a while to keep the groups from vertical "surprises". Some people call them "fliers" but I don't like that term. I was originally given a non-canting Harris bipod, but I recently switched to the Ckye Pod which seems to have cleaned that up. My personal rifles are an AI AT and Seekins SP10, and I would generally consider myself to be a 1 to 1/2 MOA shooter. Honestly, I rarely shoot anything tighter than that and consider a 1/2 group to be a good day. But when I first got this rifle I was happy to shoot 1 MOA. 1 1/2 MOA was not uncommon. I've been gradually refining things and eliminating issues like rifle setup etc. Just trying to be consistent with this gun.
Finally, if you want to tell me that I just suck and need to work harder that's fine too. I accept that this rifle shoots better than I do. Just looking for insight and I noticed a difference based on the action side and my left handed shooting.