Let's see some sass rifle/builds!!! Post'em up factory or home build anything goes!

[Kosmos]

Took a while to build this myself but I finally got it up and running last month.
Built on a DPMS stripped lower and an 18" SS CMMG complete upper receiver group Mod1 HG
Added at Wilson Combat TTU and a buffer from Heavybuffers. Topped it off with a
Nikon M-308. Recently swapped out the UBR stock for a PRS and added an atlas bipod.
Frist time out at the range I just started to get it dialed in and I noticed that flyer - sadly
that is what happens when you don't torque down your mounts to the right specs. Had
to pack it in since no tools. The target photo was taken with my phone thur my spotting scope
(little blurry) - misc build photos here in this gallery.
Future plans: I'll add a AAC 51T brake and look to upgrade the glass.

With UBR Stock

Now with PRS stock

Maiden trip to the range

Frist 10 rounds on target

 

[HOGTOOTH5R]

Love That COLOR Skg! Great Looking Rig, Thanks for Posting!

That was fresh after the Cerakote job, so the stock isn't adjusted, or anything. The pictures aren't all that great, but I took them in a hurry with a cell phone at our house in town.

 

[Heavy_D]

My Armalite 300 Ultra SASS

Armalite 24" 300 SAUM upper with a 1:10 twist threaded 5/8x24 for the YHM Phantom QD suppressor mount.
Installed a tac latch on the charge handle and replaced the original fiberglass tube with a TROY 13.8" MRF Battle Rail.
Nightforce 5.5-22x56 NXS with the NP1RR glass in a 20 MOA AADMOUNT

Went with an Armalite stripped lower
Armalite NM 2 Stage trigger with 3 lb JP Springs
KNS Anti Rotation trigger pins
Tubbs Enhanced AR10 Flat chrome silicon buffer spring
CAA SRS Sniper Stock with the Monopod
Ergo Tactical Deluxe Suregrip with the palm shelf and a Magpul MOE trigger guard

How do you like the CAA stock. My AR 10 is arriving this week and changing the furniture is the first order of business. I'm debating still between the CAA, Magpul PRS and Magpul UBR stocks.

Also, what carry handle is that? I like it a lot.

 

[Heavy_D]

My Armalite 300 Ultra SASS

Armalite 24" 300 SAUM upper with a 1:10 twist threaded 5/8x24 for the YHM Phantom QD suppressor mount.
Installed a tac latch on the charge handle and replaced the original fiberglass tube with a TROY 13.8" MRF Battle Rail.
Nightforce 5.5-22x56 NXS with the NP1RR glass in a 20 MOA AADMOUNT

Went with an Armalite stripped lower
Armalite NM 2 Stage trigger with 3 lb JP Springs
KNS Anti Rotation trigger pins
Tubbs Enhanced AR10 Flat chrome silicon buffer spring
CAA SRS Sniper Stock with the Monopod
Ergo Tactical Deluxe Suregrip with the palm shelf and a Magpul MOE trigger guard

How do you like the CAA stock? My AR10 is supposed to be here this week and the first order of business will be to replace the furniture but I am still debating between this CAA, the Magpul PRS and the Magpul UBR. Also, what carry handle is that? It looks really good. I like it.

 

[HOGTOOTH5R]

Things are getting a little BORING on here these days! I got a POF P308 Coming this week that I'll post soon. LET'S SEE MORE PICTURES!!!

 

[toyotatrdt]

308

Lancer 308 Ltr
24 inch bartlien
adjustable gas block
rca bolt
adjustable stock

target was shot at 100 yrds with 175 gr sierra handloads

 

[wareagle700]

MA-10 PSCC by wareagle700, on Flickr

 

[buffalowinter]

Springfield NM M1A in Troy Industries stock

 

[HOGTOOTH5R]

Springfield NM M1A in Troy Industries stock

That's Pretty Badass! How much does that sweet rig weight???

 

[stigmata]

Here is my M&P15 with a bit of add-ons

 

[buffalowinter]

It's not too bad...around 12 lbs without the scope.

 

[jgs8163]

MatriAero Build 7.62

Krieger 20"
Geiselle DMR
Troy AR10 Rail
MAGPUL PRS
Manticore Nightbrake
Vortex Optic
Bobro Mount
American defense QD bipod adapter
MatrixAero upper/lower

Can't get pics to upload from IPad properly???

 

[delfuego]

260 Remington, for sale too! http://www.snipershide.com/shooting/firearms-sale/250084-ar-260-lilja-w-pst-4-16x-ffp.html

 

[k2v53]

Here's mine:
Mega MaTen keymod upper and lower
Broughton 20 inch 6.5 mm Creedmoor barrel with PRI brake and adjustable gas block
Rainier Arms match BCG
Wilson Combat 3 gun trigger
Vortex Razor 5x20 scope in Spuhr 20 MOA mount
Magpul PRS
Atlas Bipod and monopod. Shoots .4 MOA with factory 140 AMAX, and better with handloads.

 

[HOGTOOTH5R]

I like your style posting the pictures. Makes me thinking about the new Spider Man movie that's out. LOL Nice Rig!

Krieger 20"
Geiselle DMR
Troy AR10 Rail
MAGPUL PRS
Manticore Nightbrake
Vortex Optic
Bobro Mount
American defense QD bipod adapter
MatrixAero upper/lower

Can't get pics to upload from IPad properly???

 

[jgs8163]

I like your style posting the pictures. Makes me thinking about the new Spider Man movie that's out. LOL Nice Rig!

Yeah I know. Not sure why I have struggled with this. Took the pics on the IPad, load upside down. Took pics again holding iPod opposite direction and the same thing.

 

[HOGTOOTH5R]

Just Got a New Toy! Waiting on the GG&G 20MOA Scope Mount to come in this week. It's going to have a Bushnell Elite 3-14x44 FFP with the G2DMR Reticle and Atlas Bipod on it! Will post another Pic once it's all together!

Let's Keep this thread going!

 

[jgs8163]

Here's mine:
Mega MaTen keymod upper and lower
Broughton 20 inch 6.5 mm Creedmoor barrel with PRI brake and adjustable gas block
Rainier Arms match BCG
Wilson Combat 3 gun trigger
Vortex Razor 5x20 scope in Spuhr 20 MOA mount
Magpul PRS
Atlas Bipod and monopod. Shoots .4 MOA with factory 140 AMAX, and better with handloads.

real nice. I have a 20" barrel on the way in 6.5 Creedmoor. What gas block are you running?

 

[Fenix Mike]

With the backup...

 

[HOGTOOTH5R]

With the backup...

That is NICE! Armalite Supper SASS?

 

[Fenix Mike]

That is NICE! Armalite Supper SASS?

Yep!

 

[meyersa88]

Here's my baby, two years it took me to piece it all together the way that I wanted.

Detroit Gun Works receiver set
22" Bartlein barrel
PRI .936 adjustable gas block
YHM rail
Geiselle SSA-E
Magpul PRS
Burris P.E.P.R. Mount
Nightforce 5.5-25X56 MOAR
Les Baer Custom National Match Bolt Carrier
CMMG LPK

 

[EricCartmann]

THE CARTMANN BIPOD FAMILY!

From Top to Bottom:
.308
7mm SAUM
.308
.308
.50 BMG

Here is my Armalite AR10 SASS with the Rest of the Cartmann-Bipod-Family (3rd from top)
- Armalite AR10 SuperSASS
- Armalite SASS Adjustable Gas System
- Armalite SASS Fore-end
- Gas Busting Charging Handle
- Noveske SS 21" Barrel
- NightForce NXS 3.5-15x50 HS/ZS MOA/MOA
- ADM Scope Mount
- Gissele High Speed Match Trigger
- PRS Buttstock
- Tango Down Bipod
- TD Pistol Grip
- PRI Backup Iron Sites
- Accushot Mono-pod
- YHM SS Silencer

 

[HOGTOOTH5R]

Hell of a Family you got there! I'm not a big fan of Flashy but that Bare Metal McCree Chassis looks Badass!

THE CARTMANN BIPOD FAMILY!

From Top to Bottom:
.308
7mm SAUM
.308
.308
.50 BMG

Here is my Armalite AR10 SASS with the Rest of the Cartmann-Bipod-Family (3rd from top)
- Armalite AR10 SuperSASS
- Armalite SASS Adjustable Gas System
- Armalite SASS Fore-end
- Gas Busting Charging Handle
- Noveske SS 21" Barrel
- NightForce NXS 3.5-15x50 HS/ZS MOA/MOA
- ADM Scope Mount
- Gissele High Speed Match Trigger
- PRS Buttstock
- Tango Down Bipod
- TD Pistol Grip
- PRI Backup Iron Sites
- Accushot Mono-pod
- YHM SS Silencer

 

[EricCartmann]

Hell of a Family you got there! I'm not a big fan of Flashy but that Bare Metal McCree Chassis looks Badass!

Thanks, it actually looks better when it is cleaned. It is kinda dull in that pic because I had my finger prints all over it. I need to wax it to keep it shiny! After a good wipedown it really shines!

 

[etxccampbell]

 

[jimmykm21]

Armalite AR10 Super SASS
U.S Optics ER 5-25

 

[scatsob]

Very nice, whose rail riser is that?

Armalite AR10 Super SASS
U.S Optics ER 5-25

 

[jimmykm21]

It's just a Blackhawk I had in lying around . I was only going to use it temporary until I got around to ordering something else.
But the damn thing just works and locks up tight as shit. So I just left it on.

 

[jasonfaz]

.338 Federal
JP supermatch 18" ML barrel & PRI adj GB
JP PSC-12
Shadow Ops Weaponry Lower
Fortis Swiznitch 14.75"
Geissele HS NM Match Rifle
AAC Titan-QD
Bushnell Elite Tact. 4.5-30x50 w/TreMor2
SPUHR Cantilever Mount, 1.46" CL
Cerakote H-Series Chocolate Brown (base), Magpul FDE

 

[blksno]

How do you like the CAA stock? My AR10 is supposed to be here this week and the first order of business will be to replace the furniture but I am still debating between this CAA, the Magpul PRS and the Magpul UBR. Also, what carry handle is that? It looks really good. I like it.

Everyone hates it, which is great for me cause I love them. I got both of mine used and couldn't be happier. I'm considering another for a bolt action rifle with a chassis. The only part that is not on the same level as the PRS is the adjustable comb. That's only because it locks at the rear and can tilt at the front. The PRS adjustment is in the middle which prevents tilt. I've found that you can set it to a sweet spot that allows you to settle into it, and have it stop where you need it. Learn to use it and it's every bit as good.
The PRS has what...3/4" of LOP adjustment. This bad boy has almost 4 inches. The butt plate also has about 2.5" up and down and the bipod that's included, is far superior to the Accushot. Not only that, but the Accushot on a PRS hangs below the standard stock lines like an after though. The monopod on the SRS is out of the way and has roughly 3.5" of adjustments. It's also got built in flush cups that aren't available standard on the PRS.

I don't know that it's worth 400...but easily worth $100 more than the PRS.

The carry handle...that's my RAPTR Grip that I've been developing for a few years. I need to get together with the boys at Horizon Machine to get the Mk1 and Mk2 designs into production.

 

[jasonfaz]

I love those stocks. Especially the fact that you don't have to carry a bag or monopod around in your pocket. Everyone does indeed rail on the "quality" yet I've never had an issue. They're lighter than a PRS with monopod attached as well. That's a clean stick c bass...