-
Having trouble using the site?
Contact support
Let's see those semi auto rigs!
- Thread starter GUNNER75
- Start date
Re: Let's see those semi auto rigs!
I would but I do not own any Semi auto rifles after this electon, all I have are slingshots and Bow and arrows. All Semi rifles and high cap Magazines I had just went away?
Just putting this out there
I would but I do not own any Semi auto rifles after this electon, all I have are slingshots and Bow and arrows. All Semi rifles and high cap Magazines I had just went away?
Just putting this out there
My LMT MWS
NF F1 Mlr 2.0 3.5-15x50 Scope with LaRue Tactical LT104 quick release
X Products X25 50 round drum
Dbal-D2 IR light/lazer day and night laser in green allows me to see up to 250 yards with my Night Vision without my scope in full darkness.
Battlecomp 2.0 comp
Magpul UBR stock,Magpul Miad Grip.
Slashes Heavy Buffer and Spring upgrade
KAC rail covers
Ergo Qd forward grip
Harris bipod with LaRue tactical qd mount.
Troy HK flip up sights
Molon Labe ejection port cover
The only thing left i want to add to this rifle is a SSA-E Trigger
Pistol is the HK45 with a Raven Concelment holster Trijicon HD (Orange) sights incoming now
NF F1 Mlr 2.0 3.5-15x50 Scope with LaRue Tactical LT104 quick release
X Products X25 50 round drum
Dbal-D2 IR light/lazer day and night laser in green allows me to see up to 250 yards with my Night Vision without my scope in full darkness.
Battlecomp 2.0 comp
Magpul UBR stock,Magpul Miad Grip.
Slashes Heavy Buffer and Spring upgrade
KAC rail covers
Ergo Qd forward grip
Harris bipod with LaRue tactical qd mount.
Troy HK flip up sights
Molon Labe ejection port cover
The only thing left i want to add to this rifle is a SSA-E Trigger
Pistol is the HK45 with a Raven Concelment holster Trijicon HD (Orange) sights incoming now
LMT MWS 20" CHROME LINED 7.62, VORTEX PST 4-16X50 FFP SCOPE, LARUE LT158 MOUNT, & RTS BUIS and my glock23 & ruger sr1911
ROCK RIVER ARMS EOP VARMINT 18" BULL BARREL 5.56, VORTEX PST 4-16X50 FFP SCOPE, and yes that is as low as you can get a scope to the rail... LOW seekins / vortex rings
DPMS 3G1 18" STAINLESS STEEL BARREL 5.56, VORTEX 1-4 PST SCOPE WITH CAPPED TURRETS, 2" OFFSET VORTEX 1PC MOUNT, RTS BUIS
ROCK RIVER ARMS ELITE OPERATOR2 16" BARREL 5.56, AIMPOINT PRO RED DOT, GG&G FLIP UP REAR
ROCK RIVER ARMS EOP VARMINT 18" BULL BARREL 5.56, VORTEX PST 4-16X50 FFP SCOPE, and yes that is as low as you can get a scope to the rail... LOW seekins / vortex rings
DPMS 3G1 18" STAINLESS STEEL BARREL 5.56, VORTEX 1-4 PST SCOPE WITH CAPPED TURRETS, 2" OFFSET VORTEX 1PC MOUNT, RTS BUIS
ROCK RIVER ARMS ELITE OPERATOR2 16" BARREL 5.56, AIMPOINT PRO RED DOT, GG&G FLIP UP REAR
Last edited:
Thanks man and nice LMT set up yourself! Where did you get your LMT? JK 
How well does that 50round drum set up work?
How well does that 50round drum set up work?
I just did some mod work to fit the Drum on it. I haven't used it with the drum yet . The way it sits now it's a huge fat hog but it's cool lol. I would drop the Drum and the scope and put a T1 on it or a Acog for less weight for sure.
im not sure what is more impressive...... the mad skills or the beard!
group pics please!
group pics please!
Subwofer2's SASS
DPMS SASS with chrome bolt carrier and 18” 1/10” Twist 416R SS Teflon coated barrel
MODS:
Harris HBRMS with BPL-Micro/Stainless from T-Nuts.com
YHM Bi-Pod Mount
Magpul .308 PRS Stock with Extended Rubber Butt-Pad, 0.80"
Accu-Shot BT12-QK – Standard height PRM with QK01 Quick Knob and steel BT07 Tac-Cap
AR10R-XH Buffer with Armalite AR10 rifle buffer spring from Slash
Magpul MADI Grip - tapped and installed set screw in rear takedown detent channel, shortened spring
Magpul PMag
VLTOR BCMGunfighter Mod 4 Medium Latch Charging Handle
Geissele Super Semi-Automatic Enhanced Trigger group
KNS Gen 2 Non-Rotating Trigger/Hammer Pins
Precision Reflex, Inc. GenIII DPMS 308 Carbon Fiber Forearm 15" length
Primary Weapons System FSC30 Flashhider Compensator
US Optics Rail Mounted Fixed ACD
LaRue LT-104 30mm mount
Butler Creek #18 and #43 covers
Nightforce NXS HSZS 5.5-22x50 Mil/Mil MLR
This pic is my rifle but edited with paint to have the longer handguard that will arrive from PRI later this week.
DPMS SASS with chrome bolt carrier and 18” 1/10” Twist 416R SS Teflon coated barrel
MODS:
Harris HBRMS with BPL-Micro/Stainless from T-Nuts.com
YHM Bi-Pod Mount
Magpul .308 PRS Stock with Extended Rubber Butt-Pad, 0.80"
Accu-Shot BT12-QK – Standard height PRM with QK01 Quick Knob and steel BT07 Tac-Cap
AR10R-XH Buffer with Armalite AR10 rifle buffer spring from Slash
Magpul MADI Grip - tapped and installed set screw in rear takedown detent channel, shortened spring
Magpul PMag
VLTOR BCMGunfighter Mod 4 Medium Latch Charging Handle
Geissele Super Semi-Automatic Enhanced Trigger group
KNS Gen 2 Non-Rotating Trigger/Hammer Pins
Precision Reflex, Inc. GenIII DPMS 308 Carbon Fiber Forearm 15" length
Primary Weapons System FSC30 Flashhider Compensator
US Optics Rail Mounted Fixed ACD
LaRue LT-104 30mm mount
Butler Creek #18 and #43 covers
Nightforce NXS HSZS 5.5-22x50 Mil/Mil MLR
This pic is my rifle but edited with paint to have the longer handguard that will arrive from PRI later this week.
Thought I'd share this even though it was only 50yds, but cut me a break I'm using a 4x Burris MTAC. .118" center to center.
Bushmaster Mass Legal M4/A3, not too much I could change. Tele stock pinned to a shorter length, Aimcomp ML2 and 3 power magnifier on an ARMS mount
Started as a M1A standard loaded: J-Allen stock, Fulton Armory op-rod, NM gas block, Vortex flash hider, Sadlak NM piston, spring guide, oversized mag release, scope mount. Nikon monarch X2.5-10x44, Leupold medium prw rings. Shoots 1/2 moa with factory 168 gr match.
that's awesome gator! very nice....
Family photo here, but my 1903 and 1911's are now crying in the corner....
Thanks man, it looks like I need another black rifle to balance the group out though...decisions, decisions. I think an A2 style w/ 20" barrel would look good in there.
LOL, i'm always a sucker for a A2 stock & an owl ear sand bag.... inexpensive but works great.
Last edited:
6mm Fat Rat
6mm Fat Rat upper build by Accurate and Reliable Rifle in Iowa. 26" Kreiger 1-8" twist, 2" extended gas system, JP Adjustable Gas Block, Suppressed Armament Systems Brake and Carbon Arms Hand Guard. Currently doing a writeup on this upper elsewhere on the Hide.
Untitled by FriedChickenBlowout, on Flickr
6mm Fat Rat upper build by Accurate and Reliable Rifle in Iowa. 26" Kreiger 1-8" twist, 2" extended gas system, JP Adjustable Gas Block, Suppressed Armament Systems Brake and Carbon Arms Hand Guard. Currently doing a writeup on this upper elsewhere on the Hide.
Untitled by FriedChickenBlowout, on Flickr
Black Rain Ordinance receiver
DPMS heavy fluted SASS barrel
Magpul Prs stock
Troy FDE 13.5 hand guard
Aadland 35mm base
Bushnell elite tactical G2dmr optics
Sub 1/2MOA system...
Love this thing!
DPMS heavy fluted SASS barrel
Magpul Prs stock
Troy FDE 13.5 hand guard
Aadland 35mm base
Bushnell elite tactical G2dmr optics
Sub 1/2MOA system...
Love this thing!
Still trying different clip-on NV's, luckily my friend is kind enough to let me "test drive"
Vectronix Nite Spot 50 cnvd on the OBR
Yes it is a large unit (had to take off my front buis for extra rail space) but the image quality is great. The scope is a Night Force F1.
Vectronix Nite Spot 50 cnvd on the OBR
Yes it is a large unit (had to take off my front buis for extra rail space) but the image quality is great. The scope is a Night Force F1.
Colt CRP-18 .223 with SWFA SS MRAD 5-20
LaRue OBR 5.56 18" barrel with Vortex Razor 5-20
I'll be running these side by side with various types of ammo on Saturday, and next week one of them will be for sale, and the other one will be getting a Magpul PRS.
LaRue OBR 5.56 18" barrel with Vortex Razor 5-20
I'll be running these side by side with various types of ammo on Saturday, and next week one of them will be for sale, and the other one will be getting a Magpul PRS.
Similar threads
