Let's see those semi auto rigs!

[Wormydog1724]

Do you have another lower that's painted to go with that? I've painted my bolt rifle and keep going back and forth if I should krylon my black rifle. Not going to lie, I'm really digging the upper painted on the black lower. Nicely done

Not at the moment. I am just weeks away from having a Noveske lower Form 1 approved. I may paint this one or that one. Or I may paint neither. I need one black, but I am having a difficult time deciding which one. They are setup identical so that's not an issue.

Another successful after work 'range' trip.

My can got a little hot and decided to change colors.


Untitled by wormydog1724, on Flickr

 

[elfster1234]

Just got her done today & hitting the range tomorrow!

Rock River Arms ATH 18" stainless steel wylde chamber 1:8twist heavy barrel & mid-length tube/gas @ $1130
Vortex Viper PST FFP 4-16x50 scope @ $850
larue LT158 10moa cant QD mount @ $200
6-9" harris swivel bipod with bipod adapter (integrated rail on the handguard worked perfect for this!) $100
20round PMAG $15
Grand total all decked out = $2295

RELOADS = 60grn v-max, 23.8varget, 2.25coal, off brand nato brass

Wish me luck that she is a shooter! LOL

 

[jn_fsu]

 

[stangguyaz]

here are 2 of mine Armalite ar10 and Rock River elite operator

 

[Nisils14]

Got this all together, I hope it shoots.

Black rain upper/lower
BCM SS410 18" Barrel
OPS Inc. Brake
WMD NiB BCG
KAC 200m-600m Flips
CMC trigger
Wilson Combat 13.8" Rail
Viper PST 2.5-10x32
NF rings
A.R.M.S. #32
Harris S-BRM 6-9"

 

[elfster1234]

Wow, that beast is awesome! I love the simple a2stock on ar's. they are wonderful for rear sandbags. Looks like the perfect set up! Only prob you might run into is the front ring is on the handguard.

Bugholes incoming!

Got this all together, I hope it shoots.

Black rain upper/lower
BCM SS410 18" Barrel
OPS Inc. Brake
WMD NiB BCG
KAC 200m-600m Flips
CMC trigger
Wilson Combat 13.8" Rail
Viper PST 2.5-10x32
NF rings
A.R.M.S. #32
Harris S-BRM 6-9"

 

[Nisils14]

Only prob you might run into is the front ring is on the handguard.

Thanks for the heads up. I was wondering about that, but I thought how bad could it be.

 

[wareagle700]

Thanks for the heads up. I was wondering about that, but I thought how bad could it be.

It could be real bad if the rail isn't perfecty aligned.
Even if it is, POI may vary due to the bipod putting pressure on the forearm, which is supporting half of your scope. I'd be suprised if it didn't affect anything.

 

[The Lawn Ranger]

JP LRP-07 in 6.5 Creedmoor

NF 5.5-22x50 Mil/MLR reticle

Berger 130 VLD's w/ 42.3 grains of H4350 @ 2755 fps (14 fps ES for a gasser across 10 shots)

I shot a 1/2 MOA group (5 shots) at 300 yds last weekend (5 mph cross wind)

A truly exceptional gun.

 

[mewillis]

Armalite Sass has Geisselle SSA-E, Knights micro buis, rail covers, handstop.
Meopta ZD 4-16 mil dot scope.

 

[Sailormilan]

 

[elfster1234]

The only time you can go past the front receiver with the front scope ring is when you have a true monolithic upper like on a LMT in which yours is not. I would try to get both rings on the main rail only without pushing your scope back to far,,,, or you might need to look into a nice 1pc offset / cantilver style scope mount.

Thanks for the heads up. I was wondering about that, but I thought how bad could it be.

 

[kujo929]

JP LRP-07

 

[VaRandy]

H&k 91

Don't know how to get larger pictures included.

My almost new all original H&K 91 (Was A2), MSG fully adjustable stock, Harris Trigger job with set trigger, and low mounted 1.75 x 6 Nightforce with Nightforce rings.

 

[Honky]

JP LRP-07

That thing is beautiful. What does it weigh, if you don't mind me asking?

 

[Wormydog1724]

MK12ModWormydog-12 by wormydog1724, on Flickr

 

[Jerry R]

HK MR762 with 5-20x50 PMII and Aimpoint T-1.

 

[Redmanss]

Very nice Jerry. Now when are the Ultra Shorts going to be available for us mortals?

 

[Jerry R]

I've been told end of summer/fall time frame. Production models are slated to have double turn locking elevation as well as illumination. The current low profile elevation knob will only increase in height by about 1.5mm for the double turn design and will offer either 32 or 34 mil of adjustment from its 40 MRAD total internal travel.

 

[The Lawn Ranger]

Jerry,

How is accuracy been on the new HK? Knowing it's an HK, I am sure reliability has been top notch.

LR

 

[wvfarrier]

This was my 5o beowulf. I actually dont have it anymore it was destroying my shoulder

http://i712.photobucket.com/albums/ww121/badguybuster/beowulf2-1.jpg

 

[wvfarrier]

Sorry for the link couldnt get pic to post

 

[Redmanss]

This was my 5o beowulf. I actually dont have it anymore it was destroying my shoulder

http://i712.photobucket.com/albums/ww121/badguybuster/beowulf2-1.jpg

You have to use the IMG function. Cheers!

 

[Redmanss]

I've been told end of summer/fall time frame. Production models are slated to have double turn locking elevation as well as illumination. The current low profile elevation knob will only increase in height by about 1.5mm for the double turn design and will offer either 32 or 34 mil of adjustment from its 40 MRAD total internal travel.

Damn... Come in at standard PMII LP pricing and I'm sold. Thanks!

 

[Jerry R]

Jerry,

How is accuracy been on the new HK? Knowing it's an HK, I am sure reliability has been top notch.

LR

Accuracy is far better than I would have ever expected. Reliability, well, it is an HK.

Certainly an acquisition I will never regret.

 

[The Lawn Ranger]

I have 4 HK pistols and never had a FTE/FTF which in itself is pretty remarkable-they just run.

I love the German rifle mated up with the German glass- Sehr gut!

I would love to see some groups.

 

[ROK]

SR-15 E3 14.5, SR-25 ECC 16" (still working with this one), M24 R From Remington (had to throw it in)



Bipod only from bench at 100 yards, 2 2round groups both from cold bore with 1 on a clean barrel/1 6 round string

 

[InsidetheStorm]

Bipod only from bench at 100 yards, 2 2round groups both from cold bore with 1 on a clean barrel/1 6 round string

I only count 9 rounds. =]

 

[ROK]

I only count 9 rounds. =]

I demand a Recount!... lmao

 

[Grinch_CZ]

V-AR 9mmL "Grinch" custom

This is my last project: V-AR in 9mmL caliber / magazine upgrade to look as real .223 mag

More pics at: V-AR 9mmL 'Grinch' - Taktická-malorážka.cz

Martin

 

[AR is for Argyle]

 

[Travv801]

Just got her done today & hitting the range tomorrow!

Rock River Arms ATH 18" stainless steel wylde chamber 1:8twist heavy barrel & mid-length tube/gas @ $1130
Vortex Viper PST FFP 4-16x50 scope @ $850
larue LT158 10moa cant QD mount @ $200
6-9" harris swivel bipod with bipod adapter (integrated rail on the handguard worked perfect for this!) $100
20round PMAG $15
Grand total all decked out = $2295

RELOADS = 60grn v-max, 23.8varget, 2.25coal, off brand nato brass

Wish me luck that she is a shooter! LOL

Interesting, this is pretty much the same setup I'm building. I ordered the same scope today.
I'm also trying to find the ATH or a similar RRA locally without having to ship one in. One place has one, but it's the AWB version. Might have the barrel threaded if I go that route. Nice rig none-the-less!

 

[evilsvt]

 

[Raptorx]

Nice little collection there!

 

[Rade1MOA]

Yep that's a great pic...nice rigs.

Sent from my DROID RAZR using Tapatalk 2

 

[Roadki11]

That's a little much. I mean come on,.. 3 YETI coolers?

 

[Skeld1]

DPMS Recon 308
Troy MRF-308 13.8" Battle Rail
Magpul MOE Rifle Stock, XTM Rail Covers, MS4 sling
EOTech 512

 

[tickled pink]

I scooped up this LE 6920 M4 & case yesterday and had the store set it up for my scope. Now I need to replace the atrocious trigger that came with it.

 

[poison123]

Is that a Honey Badger on the far right?

 

[Wormydog1724]

Forget the guns... I want the gigormus Trijicon banner!

 

[rideHPD]

Forget the guns... I want the gigormus Trijicon banner!

2nded, where do you get one of those?

 

[odonnks]

22-in JP LRP 07

 

[evilsvt]

thanks guys, the short SBR is a 10.5" with an OPS MINIs and NEA PDW stock. The banner is from Trijicon

 

[tickled pink]

Here is mine.

 

[Wormydog1724]

The banner is from Trijicon

Funny guy, eh?

 

[evilsvt]

trijicon mailed me a box, I opened the box, the banner was inside the box. I don't know how else to put it....

 

[sfogold]

Pair-o-JPs

LRP-07 chambered in 260 and a PSC-11 in 5.56

 

[ReimoS]

Nothing special or as cool looking as most of the rifles here. But this is my semi rig and so far has done everything I have needed or asked for. It has a pre-production prototype rail on it with the TRG style bipod, Sako TRG 3-ring scope mount and P&M 3-12x50. And on the plus side, that rail has been already combat proven. Link here: The Link to a pic in Facebook album

I am not very happy with the sling, probably because I do not know how to implement it as well as I should. On my scale the rifle as seen on the pic was 6,9-7 kg unloaded, standard profile 22 inch barrel. Because of the bipod it is a bit more nose heavy, but the bipod is removable (I cannot say the weight of the rifle without one, though, since I have not scaled it that way). With Lapua 170 grain Lockbase it shoots about 1 MOA and it likes the Lapua's 155 grain Scenar a lot, so far it has been under a MOA at 300-500 meters. I should try 168 grain SMK-s (Sellier's Match, that is quite readily available here). Anyway it has been more accurate than me so far.

I hope the pic works, as the attachment. It is a cell phone picture, sadly, when I have better ones I can put them up.

 

[Stalpeth]

Here's one of mine. Thinking of selling but I don't know why.

 

[800mZero]

Jp scr-11

Lrp 07 .308