Call me crazy, but I didn't realize Dwilson did URX conversion on the MWS quad. So am really leaning towards selling the LM8 upper to grab a quad. Is there still a market for such? What's the going value for an LM8 this day in age?
They did a blowout sale for around 500(LM8 no barrel) and after that, around there is where I’ve seen a few LM8’s for sale price wise. If you bought it not during that sale, I doubt you’ll see near what you spent. Which is why I’ll just keep mine! Great upper.
I got mine second hand for $700 with nearly $200 worth of accessories. So wasn’t a bad deal by any means. Quads seem to carry a much higher price tag.
Absolutely. Just a matter of the right buyer/right time. I’m not a huge mlok fan. I prefer either quad or the LM8 system. I mean I imagine you could get 500 for the stripped upper no prob if it’s in good shape for the guys that missed the deal!
For sure it’s like new. In excellent condition. Just wonder what a quad would run me. Probably 1000 or so. I’ll likely just get the lower get it together run it till i feel like switching
I would for sure. You might just find that you don’t need the quad URX drip down the line
. I’m running mine as a relatively light set up MWS lower, LM8 upper, LW SS 16” barrel. Super happy with it. Although I must admit the quad URX is sick. Yeah the quads are still going for 1k or more. I’d wait till around Christmas time and see. LMT does a bunch of sales around then.
It’ll definitely be later down the line. I don’t have a need other than i love the aesthetic and don’t wanna source KAC stuff (hence my MGL110 venture with the sabre10)I would for sure. You might just find that you don’t need the quad URX drip down the line
I’ll say the ole FA762SS really shows its weight when i put it on that upper. I plan on getting a psr 7 for it. But i also have a lot on the to do list.
Currently rebarreling a sako 85 to 6.5 prc, trying to secure an MGL110, for the mock m110 build, need to redo our 300wby that no one uses to a 7prc, plan on getting an MRAD 300 prc at some point it just goes on and on and on lol. I still don’t have the lmt lower either. Right now focus is getting the MGL110
What is the current quality of LMT these days?
The MWS seems like an interesting system, but the reports of QA/QC issues is a bit off-putting.
The MWS seems like an interesting system, but the reports of QA/QC issues is a bit off-putting.
The Sniper’s Hide answer is to buy a new suppressor cover. Also, keep this cover, and buy a new rifle/suppressor combo so the cover doesn’t just sit in a box.
I haven't purchased anything in the past year, but just looking around the various message boards, it doesn't seem like there's a bad batch of anything floating around.
In the event that there's an issue, they will make it right.
$887 for a MARS H lower with no stock sound like a reasonable deal? Titandefense having a sale right now.
I have bought a MARS-H and a MARS-L in the past 6 months. They are comparable to the MWS that I bought 10 years ago and to my KAC guns.
Machining and finish are good and they run flawlessly.
I can’t comment on their CS as I have never had to use it.
The guns come with H3’s. Unless you’re using an 18 or 20” factory barrel that’s been chopped, H3 is what you’ll want.
I’d use a LMT or Armalite AR10 spring
A5 is a hair longer than the Lmt 308 tube. It will work but I’m not sure if you’ll have bolt catch issues long term.
It is a 18” that has been chopped to 17” and has a Seekins adjustable. So maybe H2?
I had read they were the exact same length is it better to just go with LMTs buffer tube assembly and be done?
Im about to pull the trigger on a mount for my MWS. Which mount would you recommend between these 2? I dont plan on using this setup on my MARS-L or other ARs. Optic is a Leupold MK5 3-18
www.bauer-precision.com
www.bauer-precision.com
Badger Ordnance C1 MAX 35 MM, 1.54" Tall Black
Badger Ordnance C1 MAX 35 MM, 1.54" Tall Black, 154-350KB, CONDITION ONE MAX 35 MM, 1.54" TALL, Badger Ordnance C.O.M.M. MAX 35mm 1.54" 0MOA Scope Mount 154-350KB,
www.bauer-precision.com
Badger Ordnance - C.O.M.M. 35 MM 1.54" NV HEIGHT - Black
Badger Ordnance - C.O.M.M. 35 MM 1.54" NV HEIGHT - Black
www.bauer-precision.com
Either will work. I have the C1 max on my mk12 mod H cause i didn’t want the thumb screws from the regular snagging on anything. If you need a mount that is a little forward but don’t like those screws sticking out the Reptilia is also really high quality and a tad cheaper. Considering the LMT is monolithic you could go with either.
I’ve used the A5 tubes on builds with a lot of rounds through them with no issues.
I had an 18” chopped to 16” and it needs an H to run reliably so you may be right.
So i don’t need to order the buffer kit with the damn H3 in it i just asked titan defense to add to my order lol?
Kitted out 15.3 / 18" 6.5 Creedmoor pig zapper.
15.3" Mlok upper
18" Factory LW 6.5 Barrel
Leupold Mk5HD 3-18
Vortex Impact 4000 range finder
Eotech Clip-IR LR
15.3" Mlok upper
18" Factory LW 6.5 Barrel
Leupold Mk5HD 3-18
Vortex Impact 4000 range finder
Eotech Clip-IR LR
Can that Impact actually range anything with the CLIP-IR?Kitted out 15.3 / 18" 6.5 Creedmoor pig zapper.
15.3" Mlok upper
18" Factory LW 6.5 Barrel
Leupold Mk5HD 3-18
Vortex Impact 4000 range finder
Eotech Clip-IR LR
In it's current configuration, no. I need to switch to a higher diving board so it'll clear the thermal. I have been eyeing a different laser like the Wilcox or one of the newer Envision units. Alternatively, I could mount the LRF on the side of the rail.
Deadair Primal (.46? Cal) I had laying around. Probably switch to something else down the road, but it seems to work for now.
Details on both please but especially the top? Super curious about the can? I'm trying to find an over the barrel reflex style can like this for my mars h dmr 6.5.Posted this in a few other LMT pages... but I'm supper stoked with how well this build is coming together. Can is still in jail, so I can't paint it or stretch its legs yet.
And while we're at it, my "battle rifle" 13.5 .308.
Little 6/5 teaser for you shorty 6.5 fans.
If I understand your meaning. I strongly disagree. IMO MWS is a cornerstone in AR development. LMT pushed the industry with the most rigid, repeatable upper with LMT barrels, not aftermarket. People have taken upon themselves to add barrels for calibers not offered by LMT or for lighter weight and in some instances more accurate barrels. Nothing wrong with LMT barrels.
I wouldn't personally agree but to each their own, I'd say the MWS platform is the large frame lego set for shooters. I've had excellent results from factory LMT SS and chrome barrels, haven't had a reason to use other manufacturer's barrels. Still the best large frame pattern package out there in my opinion, that's just me though.
Seriously? This thread is 107 pages, most of the guns posted here are close to stock configuration and that is your take? OK.
I guess no one makes barrels in various sizes, materials or profiles for any other AR frame or platform - just the MWS
Mine has a factory 16" chrome lined barrel and shoots sub moa with match ammo.
I’ve never had any problems with LMT barrels. Their cut rifled stainless barrels shoot as good as other custom cut rifled barrels I have. Their chrome lined barrels shoot good as well.
The only reason to convert another barrel for the LMT’s is to have something they don’t offer.
I don’t see any difference in going custom for an LMT vs any other platform.
I love the look of the MWS with the M110 style can! Can't wait to get her to the range to see how she shoots!
Fix-it sticks has 140in-lb torque limiters back in stock
store.fixitsticks.com
Large Torque Limiters | Fix It Sticks
Big jobs requiring big torque need Fix It Sticks' Large Torque Limiters, available in 140, 100, 80, 65, 62 and 60 inch-lbs,
store.fixitsticks.com
Took my 16” mws out to some distance today. Setup isn’t the best with a pst 1-6, but I was shooting 168 hornady HPBT hand loads, G national match trigger, stock lmt everything else. Prior to this I had shot to 300 on steel so I knew my hold over for that distance. I then walked about 6 rounds in at 700 until I found my hold. I then went 9/10 on a 24x24 plate. I tried at 1k at the same size target and could only make one impact out of 10.
For the first time ever shooting that far I am happy with myself and the rifle the optic wasn’t doing me any favors and I’ll most likely keep it at 700 and in where it excels.
For the first time ever shooting that far I am happy with myself and the rifle the optic wasn’t doing me any favors and I’ll most likely keep it at 700 and in where it excels.
Similar threads
Firearms
LMT MWS BCG
Accessories
LMT MWS H Quad Upper
