So just like the post says, looking to purchase a can. Looks like there's a bunch of manufacturers making these things these days. Would like one I can move to different rifles and probably one that mounts to a muzzle brake or flash suppressor as I'd like to be able to use the rifles without the can. I noticed that the Griffin mounts are pretty economical and would like some type of muzzle device that I can economical outfit 6 or 7 rifles with. Will be using the can with 5.56, 6mm arc, 6.5 Grendel, 6.5 creedmoor, and 308. Not too much rapid fire going on but will be going on semi autos for pig and coyote hunting along with plinking. What do you guys suggest I go with? Figure you guys are the pros and this post will save me hours of research. LOL
-
Having trouble using the site?
Contact support
Looking to purchase my first and last suppressor
- Thread starter giannid
- Start date
I have 8 total cans ... but the one I move from rifle to rifle is my SiCo Chimera-300 and I use the ASR mount on both can and rifles. It's a great combination, and a suppressor that gives me consistently good multi-caliber results. And SilencerCo's customer support is second to none in both responsiveness and resolution. 7 of my 8 cans are from SilencerCo ... I'm definitely a fan-boy.
I bought the SiCo 36M for your exact same line of thinking.
I also configure it down to the short version and use it on my pistols as well.
Been a great little can for the last 2yrs
I also configure it down to the short version and use it on my pistols as well.
Been a great little can for the last 2yrs
Nothing bigger than .308, no SBRs, little rapid fire, no pistols, lots of different rifles with different muzzle threads. Go with something titanium, with HUB threads. Maybe Silencerco Scythe?
Definitely a 30cal can with the ability to use a HUB (1.375x24). That way you can choose your favorite attachment method.
I've got one of them too ... tend to leave it on my MRAD, but it's great in the short configuration for pistols too.
If you want to use it on rimfire too, I’d plan on two suppressors. Kinda need a take apart can for rimfire otherwise it’ll get packed solid rather quite, relative to the CF can.
I say this as after you get you can, you’ll want to use it on everything lol
I say this as after you get you can, you’ll want to use it on everything lol
We’ll see you back in a year asking about second and third cans. I only have one can at the moment, but that’s only because I don’t have room in the budget yet.
I bought an OSS/Huxwrx HX-QD 7.62, and I love it. It jumps among 5.56 and 7.62 ARs. I don’t have extensive suppressor experience, so I couldn’t tell you how quiet it is vs. some other can, but I’d argue from a sound perspective that any suppressor is better than no suppressor. The selling point for me was OSS’ claim that you don’t have to mess with the gas system, and that’s been the case for me, so far.
Happy hunting.
I bought an OSS/Huxwrx HX-QD 7.62, and I love it. It jumps among 5.56 and 7.62 ARs. I don’t have extensive suppressor experience, so I couldn’t tell you how quiet it is vs. some other can, but I’d argue from a sound perspective that any suppressor is better than no suppressor. The selling point for me was OSS’ claim that you don’t have to mess with the gas system, and that’s been the case for me, so far.
Happy hunting.
I run an Omega 36M and love it. ASR everything.
Suppressors are really user specific. When deciding, check the boxes on attachment method, sound level, hosts, weight.
I also just use it for .308 and 5.56, but wanted 36 cal in case I ever wanted to play with a 9mm. It stays in the safe in K config on a gasser. Goes to the range and hunting typically in long boy mode. I’m a simple man. Kind of glad I went up in bore now that I’m kicking around an 8.6 build.
Again, very user specific.
SiCo is great. My one can has brought me more joy and fulfillment than any one of my guns.
Suppressors are really user specific. When deciding, check the boxes on attachment method, sound level, hosts, weight.
I also just use it for .308 and 5.56, but wanted 36 cal in case I ever wanted to play with a 9mm. It stays in the safe in K config on a gasser. Goes to the range and hunting typically in long boy mode. I’m a simple man. Kind of glad I went up in bore now that I’m kicking around an 8.6 build.
Again, very user specific.
SiCo is great. My one can has brought me more joy and fulfillment than any one of my guns.
Check out PTP Tactical. I ended up with 3 of their cans; rifle, pistol and rimfire. They offer brakes or flash hiders, 5/8-24 and 1/2-28, if you don't want the blowback of a brake. I also like the feature of always ending in the same position when mounted and will lock in place with levers so can be used under a handguard. They are not the lightest but offer good sound reduction. It also looks like they have a few dealers in your area.
Last edited:
No, really. Don’t agonize over it. There are a ton of good options. And, as soon as you get your first one home, you’ll be looking for a different one. Kinda like wives.
The YHM Resonator line of silencers is hard to beat for the money. The Dead Air Nomad is a really good can too. As is the, and the, oh and the too…
The can threads over a dedicated muzzle device to create a seal that forces the gasses through the supressor. Some cans can utilize an A2 flash hider similarly. Otherwise, the can direct threads onto the muzzle threads.Can someone explain to ME ,exactly how a can works on a muzzle brake or flash suppressor ?. Gases take the path of least resistance
I'm only familiar with cans which direct thread onto a barrels muzzle ,which stuffs gases via ports washers aka baffles .
Wasn't aware any actually covered over a brake or flash suppressor ,as I assumed those had to be removed prior to installing a can/suppressor .
I remember when I said that, and added 3 more super fast shortly after that lol
So many nuances and trade-offs with suppressors.
No matter which can you choose, you will likely want more suppressors later on down the road to perform other roles.
One of my first suppressors I wanted a more general purpose type can. One that does well on my rifles from AR15's to my bolt guns, and could handle .300NM.
I ended up going with an Abel Co biscuit. It's a great "generalist" suppressor in that it performs well in many different roles.
There are trade-offs though. Its not a large volume suppressor, so it does not suppress cartridges like .300NM well at all. Being all 17-4 SS, it is heavy.
I'm now looking to get a larger volume suppressor like a Theorem-L or Enticer L-Ti to fill the role of more suppression.
Start with one that will fit most of your desires, with the understanding that you will likely need more suppressors in the future that fill other roles.
No matter which can you choose, you will likely want more suppressors later on down the road to perform other roles.
One of my first suppressors I wanted a more general purpose type can. One that does well on my rifles from AR15's to my bolt guns, and could handle .300NM.
I ended up going with an Abel Co biscuit. It's a great "generalist" suppressor in that it performs well in many different roles.
There are trade-offs though. Its not a large volume suppressor, so it does not suppress cartridges like .300NM well at all. Being all 17-4 SS, it is heavy.
I'm now looking to get a larger volume suppressor like a Theorem-L or Enticer L-Ti to fill the role of more suppression.
Start with one that will fit most of your desires, with the understanding that you will likely need more suppressors in the future that fill other roles.
Can someone explain to ME ,exactly how a can works on a muzzle brake or flash suppressor ?. Gases take the path of least resistance
I see your head is definitely still up your ass
And who is asking the dumbest, ignorant questions you expect any basic gun owner to already know? I just want to save this gem for your next meth induced , autism fueled rant about nothing. This way people who read your dribble can see how ignorant and full of shit you are.I see your head is definitely still up your ass
Um, I’m unaware of any modern suppressors that do not use some sort of baffle to slow and cool the exiting gasses. (Even wipes are baffles of a sort.) In the image below, you can see the acme threads on both the suppressor and the muzzle device. There is also a taper in front of the threads that seals them from the gasses. The second image shows the side of the can, and you can clearly see weld lines in this tubeless design. Each weld is due to the presence of a baffle at that location.
One of the biggest mistakes that people do when choosing a suppressor for a gas operated semi is to look only at sound suppression and ignore back pressure, which can affect function. You can run high back pressure cans, but you usually choose your build components and specs with that in mind. Here's the Pew Science info and data page on back pressure: Back Pressure - Suppressors
Hum - I recently got a huxwrx ventum 7.62 that seems quite nice - it has a hub interface so I could use the silencerco ASR mount with it - it seems to group a bit better than my omega 300 with less back pressure on my obr 6.5 upper. (obr has a ASR break on it)
Suppressors are like Lays potato chips , you can't stop at one.
Hey klootzak, unless you were born knowing all you claim you know now you need to STFU.
Like the OP I'm looking to acquire my first(but not last) suppressor here shortly and don't know that much about them. I'm on a learning curve same as the OP.
So, unless you have something useful to contribute you need to FO and go pound sand down a rathole.
Now, back to the regularly scheduled programing.....
Last edited:
Sounds like you don't know shit either. Sorry I didn't realize Jerry's kids got out this weekend...or learned to use a computer.
Op if you want one can ( which like everyone else said, will not happen) buy something with low back pressure. The Hux cans would be a good example. Or a KGM. Being able to shoot on ARs and not eat a ton of gas or cause malfunction issues is nice. Something 30 cal bore.
TBAC Magnus SR. .30 caliber magnum rated for full auto. Buy once and cry once. There was even one at a discount on the PX recently and may still be available.
It's a great can, I have the Ti version (Nomad-LT) since Dec. 2020, but there are quieter cans out there now... TBAC Magnus HUB, Otter Creek Labs Hydrogen-L, are about the tippy top of the list.
That's what we all said.... 8 cans ago
I had these on my phone. These are all titanium. The brake is on the barrel, and the mount (which you install into your can) then screws onto the brake with a different thread so it's easier to remove. It also has a taper to block the games and stuff from locking up the threads.
Attachments
I totally agree, in my case I am looking at a magnus for my bolt needs and a Velos lbp 765 or Ventum 765 for my gas gun joy.
They suck on ARs. Too much back pressure. I have a full size magnus on a 16" precision AR and it's still too gassy even with all that volume.
Tbac cans are awesome but they suck on ARs.
In the middle of transfer waiting on my third Thunderbeast can. 22td first, ultra 7 Gen 1 30 cal, and a fly 9 in the queue right now.
Haven't really seen anything bad about any of the Abel cans, or the OCL's either.
I agree it is only the first can.
Haven't really seen anything bad about any of the Abel cans, or the OCL's either.
I agree it is only the first can.
Can someone explain to ME ,exactly how a can works on a muzzle brake or flash suppressor ?. Gases take the path of least resistance
It goes over the top?
I saw my first down-range launch the other day. Pre-production can that clamps over an A2 flash hider...
So stick to brakes or flash hiders that have threaded can attachments.
And like the most of the guys I bought 1 can that's full auto rated and direct thread to keep it simple and easy assuming I'd only have 1.
I now have 4, and more in jail.
Can someone explain to ME ,exactly how a can works on a muzzle brake or flash suppressor ?. Gases take the path of least resistance
Both are of Q cans which I will never buy anything from them but it shows how it works.
Or a large volume .30 cal can dedicated for bolt guns and a low back pressure .30 cal can that works well on bolt guns and AR15s.
My Abel Co Biscuit performs really well on both platforms. I am not left needing a dedicated suppressor for my AR15s, and I love it for PRS type shooting on my short action cartridges.
Paired with something like a Theorem-L, Magnus, Enticer L-Ti, or something similar and you have a pretty versatile setup.
The reason why I suggest two .30 cal cans is for versatility, given the amount of rifles he wants to suppress. It's nice to have multiple suppressors for a range trip that involves 2 or more rifles. You lose that versatility with a dedicated 556 can.
Buy a 22lr suppressor and you’ll find a reason to buy a host. Suppressed 22lr is the most fun you can have with a suppressor.
With subs. Without subs might as well not even have a can.
Three points.
1. While high velocity 22lr ammunition does exist (stingers, etc), standard velocity 22lr is subsonic. This includes the majority of the 22lr ammunition on the market, including pretty much all “precision 22lr.”
2. The sonic crack from hv 22lr is noticeable from a suppressed 22lr firearm, but the overall report from a suppressed 22lr is observably quieter than an unsuppressed firearm shooting the same ammunition.
3. Oh, the irony.
Yeah fully aware of how they work and that illustrates MY perspective perfectly ; Threading onto the barrel ,regardless of thread as adapters are available .
What I was confused about was how they would work attached to a Brake or Compensator ??. Gases would simply blow out compensator ,rather than drive through the can's baffle system . Having read the 1 St. posting **,I assumed I was missing a new device .
** ( Would like one I can move to different rifles and probably one that mounts to a muzzle brake or flash suppressor as I'd like to be able to use the rifles without the can ) ?
