And the thing is, it’s not even a custom color request. I just want more of the Tac Swamp color palate. So many of them now have so little coverage it looks like they ran out of the paint and had to make it work so put a dab here and dab there and call it 50% coverage.
-
Having trouble using the site?
Contact support
Hi calamjin, i just came across your post and didnt see a pm. I just shot you a pm. Shoot me your contact info, ill give you a buzz. Thank you
Remember the Mitch Hedberg joke about cooking a baked potato in the oven?
"Sometimes, I'll order a Manner stock,,, even if I don't need one......, because by the time it's done,, who knows?!?"
"Sometimes, I'll order a Manner stock,,, even if I don't need one......, because by the time it's done,, who knows?!?"
Just finished a build on a PRS1 and couldn’t be happier with how it came out. Tom personally made sure the experience went well and in the end I got a badass rifle exactly how I wanted it built on the stock I wanted. I couldn’t be any more amped than I am.
Picked it up in the shop yesterday and it hands down felt better in hand than anything else on the floor.
Thanks @tmanners
Picked it up in the shop yesterday and it hands down felt better in hand than anything else on the floor.
Thanks @tmanners
Hello everyone, I have ordered a manners lrh stock does anyone have first hand reviews on them? I like the practicality of the arca and picatinny rail I can’t find much reviews on it and figured I’d try on here
Right now i´m a little bit obsessed with the F Class Stock, even tough Manners Stocks are hard to get over here in Europe.
What Lead Time do i have to expect for a Manners F Class, just pure Carbon Shell, Inlet may be done by my gunsmith.
What Lead Time do i have to expect for a Manners F Class, just pure Carbon Shell, Inlet may be done by my gunsmith.
Not that big of a deal as the GAP just adds small things like the thumb rest and nothing a T2 user would find objectionable. The GAP version is what I would get anyways for the thumb rest. Helps a lot for comfort and grip repeatability.
Do you have any experience with mcmillan stocks? I'm currently using an a3-5. I'm not a big fan of the butt hook and I also wish I would've got the spacer system so now I'm considering just getting a different stock. I also like how the mini chassis doesn't require bedding. The grip area of the mcmillan is about right for me and it seems like the manners may be a bit smaller.
Yes but been a while since I used them. After getting the Manners with the mini chassis I never went back to McMillans. From what you posted the T2A would be a good match for your needs. The PRS2 is worth a look also if you wanted a slimmer forend.
I have a tac elite T4a I specified an M24 barrel, is it possible to put an MTU profile barrel in? If not how hard is it to open up the barrel channel?
I doubt it will fit but a couple minutes with a wooden dowel wrapped with sandpaper and it will fit no problem.
I opened up my mcmillan from a remington varmint to mtu contour with wrapping sand paper around sockets.
Hi, some MTU will have a pretty big shank on them depending on manufacture. If you want to get it back to us, we can always open it up asap, just let me know what your straight shank length is. Thank you
Thanks, I actually got an M24 barrel, so no need to open it up. I am still amazed by your CS, Thank You!
I ordered a PRS1T on 2/22/24 and got it today. I’m assuming a cancellation fell into my lap, but it’s exactly like I ordered it.
I’ll jump in. I ordered a Manners PRS Stock in Back in Black Composite. Putting a Defience Action and Bartlein full Bull Barrel 26“ in 6.5 PRC with matte black cerakote barrel. Mounting a Kahles 525i DLR with a diving board for a Vortex Impact. It should arrive in a couple weeks. Can’t wait to get my hands on it.
Maybe mine is getting close. I ordered Feb 15 and hoping it comes through soon!!!
Finally!!! Ordered 8/31/23, received today 7/11/24!
But its bloody well worth it!
I wish I could tell you. I don't have any insight on that at the moment. It's not common when we run out of those but is a bad deal when we do.
It sounds worse than it is. I don't work in production so I don't have any info on it. I just heard they had run out. I do know it's pretty rare we run out of those as we order a ton of those. Didn't mean to scare.
Quick question. My custom stock arrived before my barrel. I want to install the pillars now but not make any huge errors. Plan is to trim them so they are just a tad high. Push them down until they contact the bottom metal. Once cured, trim them down to closely match action contour but remove a tad extra. Should be close since custom stock cut for my action and barrel. Once barrel/action arrive skim the top of the pillars and drop the action in. Any problem I am missing with this process. Trying to get as much done as possible while I wait.
You’re probably not saving much time but definitely bringing in the chance of having to spend much more time fixing something. Imo
I’ve probably bedded 40+ stocks and many have been manners with pillars. The manners with pillars is by far your best chance of accomplishing your goal without a hiccup. However more times than not I always end up with a touch of fitting and I prefer to get this done before epoxy is mixed. Once something like devcon 10110 which I use has those pillars locked in it’s going to be a nightmare if you have any alignment issues. Why I say in my opinion I would confirm everything is right before you do anything permanent. Your saving minutes for a possible dremeling mess. But opinions are like assholes and that’s just mine lol. Is the juice worth the squeeze?
I hear they are finishing up now. Just waiting on a few small hardwareparts to get wrapped up. The stock parts are finished for the most part I hear.
