Hey man, feel free to e-mail me at [email protected] and I'll be glad to help you you out and check on it.
-
Having trouble using the site?
Contact support
I haven't seen this (haven't really looked) - but do we anticipate a similar 9 month-ish lead time on the new PRS-TCS stocks? I saw on Instagram where they (Manners) have new machines dedicated to cranking these out. Curious if these are meant to be a quicker turnaround option for a sweet ass stock?? The lead time has been the only thing holding me back...
We got some dedicated machines for the new stock and were thinking we can keep em in the sub 6 month timeline but hate to promise too much until we get enough of em going to know for sure.
Emailed Robert a couple days ago, no answer so either he is super busy or my questions are stupid. (Eight years in the Marines teaches you there are actually stupid questions.) So I'll repeat them here.
I have a few questions before placing an order.
First question, Defiance just released a new action, the anTi. I'm assuming just selecting Defiance S/A will suffice in the stock builder? Not sure if it is another action just shaved down and I should select one of the actual action choices, or if it is different completely.
In place of an Atlas rail, I would like to put a RRS Arca rail on the front instead. Not sure if this is possible, if so how would we go about this.
Flush cup options, I don't see one that I particularly like in the list. Optimally, I would like one right side rear, and left side front. Mostly because this is how I'm accustomed to carrying my other rifles. If I can shave a little money and save $36 and not have to buy both options for left and right that would be nice.
Last question, do you need the barreled action?
If anybody can answer these for me that would be great. Thanks!
I have a few questions before placing an order.
First question, Defiance just released a new action, the anTi. I'm assuming just selecting Defiance S/A will suffice in the stock builder? Not sure if it is another action just shaved down and I should select one of the actual action choices, or if it is different completely.
In place of an Atlas rail, I would like to put a RRS Arca rail on the front instead. Not sure if this is possible, if so how would we go about this.
Flush cup options, I don't see one that I particularly like in the list. Optimally, I would like one right side rear, and left side front. Mostly because this is how I'm accustomed to carrying my other rifles. If I can shave a little money and save $36 and not have to buy both options for left and right that would be nice.
Last question, do you need the barreled action?
If anybody can answer these for me that would be great. Thanks!
Just call them up. Floyd is particularly awesome to deal with. You can give more details placing an order over the phone such as what you want for flush cups etc.
Hey Man, did you get a response because I'm caught up on my e-mails other than a few from last night? [email protected] in case you have it in wrong. Let me know how I can help.
All those things you mention are easy for us. We don't have to have the barreled action either. Please let me know if I can help in any way.
Responded back! The names didn't match up from order to e-mail so I was left wondering on yours lol. Your post here reminded me who's it was. Let me know if you have any other questions.
Is anyone running mdt mags on their mini chassis? Got a 12 rounder that’s very tight to get in. Accurate mags run fine but the mdt is tight. Just trying to diagnose if it’s a mag problem if I need to contact MDT or move the mag down the road for another accurate mag.
Is there any difference between starting with a flat top stock vs going with the made to order options when it comes to the action inlet?
Is the ejection port milled out after the stock is molded on both options?
Is the ejection port milled out after the stock is molded on both options?
Last edited:
Either way its a long wait. With all the demand, i wish they would up production... Im slowly buying more chassis over stocks.
I worded my question poorly.
Is the ejection port and bolt handle area machined after the stock is molded?
Is there any downside buying a generic Rem 700 and having it opened up to fit an Impact or other similar action?
LRI had a cool video of his CNC machine inletting a stock top to bottom side to side. CK it out.
Hey Manners, would like to give a shout out to Jim. ?? Had a minor issue with a butt pad and he took care of me asap.
Sent email out Mon night regarding issue, received response next morning, replacement part scheduled for delivery tomorrow. That's service folks!!
Sent email out Mon night regarding issue, received response next morning, replacement part scheduled for delivery tomorrow. That's service folks!!
There is no difference. The flat tops are simply stocks we think people would want and we build them out but not inlet them. After they are complete we put them on the website to be inlet to your specs. Whether short or long, right hand or left. That way guys who need something faster can get them if the model and color are acceptable to them.
Hope this helps!
We have alot of options so phone calls can take awhile and many times we have all 3 guys on the phone at the same time. Never hesitate to email me at [email protected] if you can't get through and I'll be happy to help you. I've been out last few days for a marketing effort and catching up now. I'm always glad to help y'all. I started out on Snipers Hide and still love the community!
Just wanted to give Mr Tom Manners a huge THANK YOU. Manners customer service is the best I have ever delt with!
Hi, just sent you a pm, shoot me a pm with your build number and info. I’ll get right back to you. Thank you
Order is in and confirmed as of this afternoon for a PRS1TK. Read up on wait times before I ordered. Figure I have time and not like I have not waited the same amount or longer for other items before. Will be my first Manners. Up until now have done a couple MPA chassis.
I placed an order for a PRS2 on 11.21.19 and it was delivered yesterday, 4.2.20. I wasn't expecting it until at least late May!
Ordered mine in October.
Just got the email saying will be ready in 4 to 5 weeks.
This will be my 4th manners stock.
3 out of the 4 I have ordered have taken right around 6 months. 1 took about 8 months.
Always worth the wait.
Just got the email saying will be ready in 4 to 5 weeks.
This will be my 4th manners stock.
3 out of the 4 I have ordered have taken right around 6 months. 1 took about 8 months.
Always worth the wait.
I ordered mine about a week after you did (PRS1) and got the shipping notification today.
Got my invoice email today and paid. Looking forward to my first manners!
