I was about to order some goodies to update an older Harris but by the time i order all the shit i could just buy one of these. Already have 2 Ckyepods and hope to order a double next black friday 
MDT GRND-Pod
- Thread starter neeltburn
- Start date
well guess what showed up today. woohoo!
and then guess what I already broke. boohoo.
and then guess what I already broke. boohoo.
lol, oh right... well the cant lever when tightened aimed straight up into where the arca rail would be so in an attempt to re-time it I apparently overtightened the little screw that holds the handle on and snapped the threads off. didnt take much as the screw tapers down to small like 3/32" threads.
Honestly not impressed by overall build quality.
Honestly not impressed by overall build quality.
couldnt find whatever tiny metric screw they useds so drill and tapped it 8-32 because I have a bunch of those kicking around. ill get a black socket head cap screw from HD later. but im back in business.
getting it back together I think you are supposed to be able to re-time the handle by simply pulling out on it and not actually dissasembling it. which was not blatantly obvious.
getting it back together I think you are supposed to be able to re-time the handle by simply pulling out on it and not actually dissasembling it. which was not blatantly obvious.
Every pod-lock lever I've ever used has worked that way. Accu-Tac, KMW for Harris, Atlas CAL, all of them. Pull out to re-time.
Something tells me that was in the instructions, on the web site, or in a product video.
wtf, going to have to check my atlas when I get home. never knew it did that. honestly never used a bipod that did that.
I didn’t mean for me, I meant for you. I’m not the one out here turning fasteners til they snap LOL.
Looks like an easy enough fix, I’m sure it will be all right. I may have wobbled out a screw once or twice in my day too.
Yeah I thought it was a normal operation break but if you didn’t know how to reposition the handle with a simple pull and twist like the Pod Loc then that’s not an equipment issue but a user issue. I am sure they will get you fixed up and then be a little less heavy handed and mess with it a little to see how it works.
Never owned a bipod or a good tripod so this is good information for me because I might have broken mine.
It is good seeing a Ground Pod getting delivered.
Of course I just back ordered mine today so I know I wont see it for a while.
It is good seeing a Ground Pod getting delivered.
Of course I just back ordered mine today so I know I wont see it for a while.
im a little dissapointed. I would put it in the same catagory as a magpul or fab defense spike. every joint and moving part is sloppy loose. me breaking the screw aside the cant lock is a hokey carriage bolt pressing a washer and doesnt tighten enough to prevent movement.
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
We're sorry to hear that; we can get that swapped out for you if you would like to? Please reach out to us through our support portal, and we will get that taken care of.
-Anthony
support.mdttac.com
-Anthony
MDT Help Center
Hi All,
I've received mine today (i'm in Canada), it was ordered on Feb 3.
To be honnest i'm deceived of the build quality of this bipod.
Really love the craftmanship on my LSS Gen 2, ACC and various other items from MDT but this one look to me like they wanted to go mass market on a lower cost bipod and outsource in China.
Main portion of the two legs are probably cast metal (probably aluminum) and not CNC like all their usual stuff. (main reason i buy from them)
They have the marks on either sides of the part just like a mold would do.
Finish on the main frame is already fading (open / closed a few times)
Arca knob is made of a cheap, shiny plastic which feel like it will break just by tightning it.
Oddly enough different from the other injection molded part on the bipod which feel better.
Customer service said to tighten the setscrews on the back of the leg (which indeed works for the play). The washer and knob were designed that way they said, noting to do there.
I've received mine today (i'm in Canada), it was ordered on Feb 3.
To be honnest i'm deceived of the build quality of this bipod.
Really love the craftmanship on my LSS Gen 2, ACC and various other items from MDT but this one look to me like they wanted to go mass market on a lower cost bipod and outsource in China.
Main portion of the two legs are probably cast metal (probably aluminum) and not CNC like all their usual stuff. (main reason i buy from them)
They have the marks on either sides of the part just like a mold would do.
Finish on the main frame is already fading (open / closed a few times)
Arca knob is made of a cheap, shiny plastic which feel like it will break just by tightning it.
Oddly enough different from the other injection molded part on the bipod which feel better.
Customer service said to tighten the setscrews on the back of the leg (which indeed works for the play). The washer and knob were designed that way they said, noting to do there.
Last edited:
So the first few examples of these in the wild have shown up all black in color which we are told was a one time limited run and with sloppy fit and finish. Really getting me excited to receive mine whenever that day comes.
Any comment @MDT_OFFICIAL or @MDT_Josh ?
Any comment @MDT_OFFICIAL or @MDT_Josh ?
There are two setscrews per leg that are there to adjust the fit between the plastic and the aluminum core of the leg. Those were not set properly on mine and MDT told me to adjust them.
This gets rid of the play in the legs for now. (screws seems quite loose, not sure they will stay properly adjusted)
It doesn't solve the knob, washer or finish however.
would you mind taking a picture of the order of the washers. theres 3 brass and one steel. If you take the cant lever and pin out and get the washers wrong it wont work.
I wouldnt reccomend it. you can find Atlas Cals for a few dollars more and its 100x better quality. if you just need a quick lightweight bipod magpul or Fab Defense Spike for half the price.
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
There was a very small run of BLK that ended up in the mix, and currently, there have been some huge delays that were unforeseen, so we did release them to get bipods shipped. As for the other portion, this is our first reported case of any issue with the legs, and we have shipped a decent amount already. It got past QC by mistake, but we are looking into it to ensure it doesn't happen. We have changed the knob, although they are of similar construction except the new style is a three-prong design opposed to the four-star with a different surface finish so that is changing. Can't comment on the finish, haven't heard of anything.
-Anthony
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
It's anodized aluminum so it takes most coatings incredibly well. Rattle can will do the trick for sure!
-Anthony
We have shipped hundreds already and only a small handful have had issues (which we're already working to adjust), so that is a fairly smooth product launch in my opinion. I am sorry to hear that some of you have been running into issues, but we're trying to provide you the best bipod for the money and there are always bound to be compromises made! Unfortunately we can't make a $200 Ckye-pod yet
- Josh
The new knob might not be a big improvement but sure look better from what i can see on your website.
The finish is already wearing out on mine and it probably openned it 10 times.
I'm not expecting a $200 Ckye-pod but i'm comparing this to something in the same price range. (Atlas & UTG Recon 360)
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Is anyone having issues with the clamp opening up on the arca version? Just got mine today and was surprised by the quality. I could not get the clamp to open up until I smacked it with a dead blow. After tightening it back down, had to do the same thing to get it to "release". Legs seem good to me but the polymer controls are way cheaper feeling than what I expected. I can over look a few things for the $200 price tag but the arca clamp setup is a huge hang up for me.
Last edited:
I just wish there were knurled bolt heads or some way to grab them on the picatinny version. It’s a pain to break out an Allen wrench to move the bipod back and forth between rifles. I assumed it would have something similar to the ARCA setup.
If you can get the clamp side off the mount and just put it in on one side like this first pic it slides in and out like butter. Does this no matter what side you put it in as long as it's one side/pin at a time. Inserting it correctly jams it up to a point where it won't come back off without some serious effort and it wouldn't tighten down on to any of my RRS or 419 rails. MDT is legendary for making stuff right, but this is pretty bad.
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Just got mine today.
Ordered on 30 Apr 22 so a little shy of 10 weeks.
Fit was great and I had no problems with it.
Originally had it further back but realized with the legs fully extended they were past the front of the magazine.
With it fully forward I can fold the legs back while fully extended without interfering with a mag change.
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Nice! Great to hear, yes, the GRND Pod was a weird challenge, honestly, but glad to hear you got it, and it's working out for you!
-Anthony
-Anthony
I noticed it says the Ckye-Pod will also work on this bipod.
I was wondering if the Ckye-pod feet also use a roll pin or are they a ball detent style?
And if they are the ball detent style do you sell them separately?
Looking to have feet that are easier to switch out.
Thanks.
I was wondering if the Ckye-pod feet also use a roll pin or are they a ball detent style?
And if they are the ball detent style do you sell them separately?
Looking to have feet that are easier to switch out.
Thanks.
They are a ball/detent style and you'll have to ask @MDT_OFFICIAL if they're able to sell them separately!
- Josh
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Some of you punks sure are being critical of an obvious “gateway drug” bipod. It is obviously not supposed to measure up to things costing twice as much.
MDT GRND-POD BIPOD A.R.M.S. 17S MOUNT | Brownells
Versatile and Modular Brownells Exclusive 17S GRND-POD Bipod The MDT GRND-Pod (pronounced "Ground-Pod") was developed for the shooter wanting a stable ...
www.brownells.com
Apparently brownells has ARMS 17 MDT GRND pods so you can put a RRS SC-ARC on it and be set
