• Win a RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below!

    Join the contest

MDT Oryx Chassis

#453
#469
MDT_Josh said:
The Mossberg MVP .223 will use Ar15 magazines :) We use a standard AR mag latching system, so the factory magazines, as well as the huge amount of aftermarket magazines, should all latch in just fine!
Click to expand...

just being a fan that is not 6' ~ can you update us on the progress for the ACC LOP reduction?? I don't mind being the ginny pig :)
 
#470
IMG_1715.JPG


I had the Howa Oryx in 6 Creedmoor out on Sunday, stretching the legs a little. It hurts a bit that I have to send it back soon because it's just incredible how good this rifle and chassis combo is for under a $1,000.
 
  • Like
Reactions: geek65 and MDT_OFFICIAL
#471
MDT_OFFICIAL said:
We strive to provide the best possible experience!
Click to expand...

So about the PRS Discount, (sorry, I browsed your post history and couldn't find a post really detailing this and want to be sure)

I have yet to shoot a match or sign up.

www.precisionrifleseries.com

Precision Rifle Series| Memberships Page

The Precision Rifle Series is the preeminent rifle organization in the world, structuring a yearly points race for both the PRS Pro Bolt Gun Series and the PRS Regional Series. The PRS Championship Shooting Series is synonymous with precision rifle shooting.
www.precisionrifleseries.com

Is the process to sign up for either a Pro or Regional series membership, get a number, and then send my profile to MDT support with what I want?

Do I have to shoot a match first? LSS-RF eligible?

Many Thanks.
 
#473
308ftWIN said:
So about the PRS Discount, (sorry, I browsed your post history and couldn't find a post really detailing this and want to be sure)

I have yet to shoot a match or sign up.

www.precisionrifleseries.com

Precision Rifle Series| Memberships Page

The Precision Rifle Series is the preeminent rifle organization in the world, structuring a yearly points race for both the PRS Pro Bolt Gun Series and the PRS Regional Series. The PRS Championship Shooting Series is synonymous with precision rifle shooting.
www.precisionrifleseries.com

Is the process to sign up for either a Pro or Regional series membership, get a number, and then send my profile to MDT support with what I want?

Do I have to shoot a match first? LSS-RF eligible?

Many Thanks.
Click to expand...
As long as you are signed up and have a membership number, you qualify for the discount. Yes, once you have signed up message us through our support portal and provide us with the profile and we can supply you the discount code. Please note, this only applies for MDT products and not Oryx. No, you don't have to shoot a match, and yes, the LSS-RF is eligible.
 
  • Like
Reactions: 308ftWIN
#480
loveha said:
Doesn't want to flop over upside down then? That is the issue when you put a QD on the bottom. Because there is a lot more aluminum at the end there too preferably put in a flush cup.
Click to expand...
Nah it's not trying to flip over on me. I think either the side or the front would work fine. The barrel rides high enough and the channel has so much room that I don't think there's even a remote chance of barrel contact if you put a flush cup in the side
 
  • Like
Reactions: Rover31
#486
BigdaddyWSM said:
Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?
Click to expand...
Comes with a grip already; however, any AR-15 grip without beavertail will do. I run our vertical grip on mine; it's awesome!
 

Attachments

  • IMG_3652.jpg
    IMG_3652.jpg
    85.3 KB · Views: 325
  • Like
Reactions: Central Line and BigdaddyWSM
#487
MDT_OFFICIAL said:
Comes with a grip already; however, any AR-15 grip without beavertail will do. I run our vertical grip on mine; it's awesome!
Click to expand...

What’s the probability of seeing an LSS (either size) for a Howa mini with a fixed interface? Leaning towards an Oryx because I dislike looking at buffer tubes (and stock adaptors) on a bolt action.
 
  • Like
Reactions: Nathantc
#488
n00g7 said:
What’s the probability of seeing an LSS (either size) for a Howa mini with a fixed interface? Leaning towards an Oryx because I dislike looking at buffer tubes (and stock adaptors) on a bolt action.
Click to expand...
There are no plans at this time, however, you can always run a carbine to fixed stock adapter and a fixed buttstock.

mdttac.com

Carbine to Fixed Stock Adapter

The Fixed Stock adapter connects to any of our carbine interface chassis enabling the use of a fixed buttstock. Connect our MDT Skeleton Rifle Stock to an MDT chassis that is equipped for a carbine stock. The Carbine to Fixed Stock Adapter installs in seconds and increased the modularity of our...
mdttac.com mdttac.com
 
#489
MDT_OFFICIAL said:
There are no plans at this time, however, you can always run a carbine to fixed stock adapter and a fixed buttstock.

mdttac.com

Carbine to Fixed Stock Adapter

The Fixed Stock adapter connects to any of our carbine interface chassis enabling the use of a fixed buttstock. Connect our MDT Skeleton Rifle Stock to an MDT chassis that is equipped for a carbine stock. The Carbine to Fixed Stock Adapter installs in seconds and increased the modularity of our...
mdttac.com mdttac.com
Click to expand...

Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.
 
#490
n00g7 said:
Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.
Click to expand...
Fair enough, we do provide the option should someone want it.
 
#491
n00g7 said:
Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.
Click to expand...
I have a Howa Mini in a MDT Brownells BRN-1 with the MDT Skeleton stock. I don't think it's that bad.
 

Attachments

  • IMG_20181127_201429809.jpg
    IMG_20181127_201429809.jpg
    459.7 KB · Views: 283
  • Like
Reactions: MDT_OFFICIAL
#492
Rangerbob33 said:
I have a Howa Mini in a MDT Brownells BRN-1 with the MDT Skeleton stock. I don't think it's that bad.
Click to expand...

Ok, it’s not nearly as offensive as I thought it would be, but LOP is too long with the adapter. Will be going with a LSS+carbine unless I decide I might want to steal it from the wife and play around with it in production (would have to run the oryx to mimic a factory rifle.)
 
#497
sambo11510 said:
I have a possible dumb question. I have TC compass in 7mm rem mag. I assume we would run the factory mag correct?
Click to expand...
erwos said:
Any chance of seeing a version of the Oryx for the Ruger American AR mag rifles?
Click to expand...

We only offer a short action chassis for the TC Compass at this time which will not fit your 7MM Remington Magnum version. However, make sure to leave a request on the Oryx website. Also, there are no plans to offer a Ruger American AR version to the Oryx lineup; however, we do have the LSS-XL Gen 2 available for your rifle.

Oryx Oryx Product Request

Complete bolt action chassis system for under $400. Available for Savage, Howa, Tikka and more!
oryxchassis.com oryxchassis.com
 
  • Like
Reactions: sambo11510
#498
I was aware of the LSS-XL Gen2; it's simply that once I put a stock on that chassis, it's like 50-100% more than the Oryx. I very much liked the idea of a spending $400 and having a usable chassis. Ah well.
 
#499
erwos said:
I was aware of the LSS-XL Gen2; it's simply that once I put a stock on that chassis, it's like 50-100% more than the Oryx. I very much liked the idea of a spending $400 and having a usable chassis. Ah well.
Click to expand...
That is true. but keep in mind it is built for standard AR-15 parts so if you would like to install an entry-level stock there is a lot of choices!
 
#500
Sorry if I missed it in this thread... I have ordered a Howa 1500 in 6mm Creedmoor and the Oryx stock. I handload and would like to get a magazine with lots of COAL room so I can load long if need be; I'll be using larger bullets like the 110gr SMK.

I know this takes AICS magazines, but which tend to accommodate longer COAL or can be windowed?

Thanks
 
You must log in or register to reply here.

Similar threads

K
Accessories MDT Oryx chassis with extras
Replies
9
Views
602
Kahrhart63
K
C
SOLD WTS/WTT LA MDT Oryx chassis
Replies
2
Views
262
Cmiller5
C
I
SOLD MDT Oryx Tikka T3x S/A Chassis
Replies
0
Views
185
IronOperator87
I
NearSighted25
MDT Oryx - Weight adding options
Replies
45
Views
2K
MO Fugga
MO Fugga
6
SOLD FS Two MDT Oryx Chassis for Remington 700 SA
Replies
1
Views
330
6BR_Sniper
6
Top Bottom
Back
Home
Forums
Merch
Alerts