MDT Oryx Chassis

[MDT_OFFICIAL]

These look pretty interesting. I've been looking at the MDT's and this may be the ticket

You will love it!

 

[rcmigpilot]

Yes, we sure are! They have been delayed, but they should be available soon!

Any idea on the time frame? Weeks, months?

 

[MDT_OFFICIAL]

Any idea on the time frame? Weeks, months?

Yes, they are available now! Along with the 308 version, Savage Long Action, TC Compass short action, CZ 455, CZ 457, and Savage Mark II, all are in stock and ready to ship!

Buy now:

ORYX Precision Rifle Chassis System

oryxchassis.com

 

[rcmigpilot]

Looked just the other day and it wasn't there. You guys are really trying hard to make me spend money.

 

[308ftWIN]

Yes, they are available now! Along with the 308 version, Savage Long Action, TC Compass short action, CZ 455, CZ 457, and Savage Mark II, all are in stock and ready to ship!

Buy now:

ORYX Precision Rifle Chassis System

oryxchassis.com

Please consider a Savage B22!

Thanks!

 

[MDT_OFFICIAL]

Looked just the other day and it wasn't there. You guys are really trying hard to make me spend money.

We are very excited about the new additions to the Oryx line up, and we're grateful you are considering trying our product!

 

[MDT_OFFICIAL]

Please consider a Savage B22!

Thanks!

We will consider it! We are preparing to launch our LSS-RF for the B22 very soon!

 

[rcmigpilot]

Getting ready to buy, do you know what the lead time will be for a Mossberg MVP .223 inlet? When it will ship will depend on where I have it shipped to.

 

[MDT_OFFICIAL]

Getting ready to buy, do you know what the lead time will be for a Mossberg MVP .223 inlet? When it will ship will depend on where I have it shipped to.

We are in stock and ready to ship! We generally ship within two business days of the order being placed.

 

[308ftWIN]

We will consider it! We are preparing to launch our LSS-RF for the B22 very soon!

Will definitely be keeping an eye out for that!

 

[MDT_OFFICIAL]

Will definitely be keeping an eye out for that!

Make sure you are signed up for the newsletter as well!

 

[rcmigpilot]

We are in stock and ready to ship! We generally ship within two business days of the order being placed.

Done, you guys make it way too easy to spend $414

 

[MDT_OFFICIAL]

Done, you guys make it way too easy to spend $414

You will love it!

 

[MDT_OFFICIAL]

Will definitely be keeping an eye out for that!

These became available today; quality control is fire today! Check out the https://mdttac.com/lss-rimfire-chassis-system.html to place your order.

 

[308ftWIN]

These became available today; quality control is fire today! Check out the https://mdttac.com/lss-rimfire-chassis-system.html to place your order.

Now that's just good service.

 

[MDT_OFFICIAL]

Now that's just good service.

We strive to provide the best possible experience!

 

[rcmigpilot]

You will love it!

Forgot to ask, do I need the Oryx mags or does the MVP version use the AR mags?

 

[MDT_Josh]

Forgot to ask, do I need the Oryx mags or does the MVP version use the AR mags?

The Mossberg MVP .223 will use Ar15 magazines We use a standard AR mag latching system, so the factory magazines, as well as the huge amount of aftermarket magazines, should all latch in just fine!

 

[Diver160651]

The Mossberg MVP .223 will use Ar15 magazines We use a standard AR mag latching system, so the factory magazines, as well as the huge amount of aftermarket magazines, should all latch in just fine!

just being a fan that is not 6' ~ can you update us on the progress for the ACC LOP reduction?? I don't mind being the ginny pig

 

[Trigger Monkey]

I had the Howa Oryx in 6 Creedmoor out on Sunday, stretching the legs a little. It hurts a bit that I have to send it back soon because it's just incredible how good this rifle and chassis combo is for under a $1,000.

 

[308ftWIN]

We strive to provide the best possible experience!

So about the PRS Discount, (sorry, I browsed your post history and couldn't find a post really detailing this and want to be sure)

I have yet to shoot a match or sign up.

Precision Rifle Series| Memberships Page

The Precision Rifle Series is the preeminent rifle organization in the world, structuring a yearly points race for both the PRS Pro Bolt Gun Series and the PRS Regional Series. The PRS Championship Shooting Series is synonymous with precision rifle shooting.

www.precisionrifleseries.com

Is the process to sign up for either a Pro or Regional series membership, get a number, and then send my profile to MDT support with what I want?

Do I have to shoot a match first? LSS-RF eligible?

Many Thanks.

 

[MDT_OFFICIAL]

just being a fan that is not 6' ~ can you update us on the progress for the ACC LOP reduction?? I don't mind being the ginny pig

It is currently in progress! You can order without fear!

 

[MDT_OFFICIAL]

So about the PRS Discount, (sorry, I browsed your post history and couldn't find a post really detailing this and want to be sure)

I have yet to shoot a match or sign up.

Precision Rifle Series| Memberships Page

The Precision Rifle Series is the preeminent rifle organization in the world, structuring a yearly points race for both the PRS Pro Bolt Gun Series and the PRS Regional Series. The PRS Championship Shooting Series is synonymous with precision rifle shooting.

www.precisionrifleseries.com

Is the process to sign up for either a Pro or Regional series membership, get a number, and then send my profile to MDT support with what I want?

Do I have to shoot a match first? LSS-RF eligible?

Many Thanks.

As long as you are signed up and have a membership number, you qualify for the discount. Yes, once you have signed up message us through our support portal and provide us with the profile and we can supply you the discount code. Please note, this only applies for MDT products and not Oryx. No, you don't have to shoot a match, and yes, the LSS-RF is eligible.

 

[Diver160651]

It is currently in progress! You can order without fear!

Great. Do you have the min- lop?

 

[MDT_OFFICIAL]

Great. Do you have the min- lop?

13.5" is the minimum LOP.

 

[PoniesWhee]

Not the most elegant solution but it works

 

[loveha]

How does it ride slung?

 

[PoniesWhee]

How does it ride slung?

It's no lightweight woods gun but not bad if I slide the bipod out of the way. The Warne Skyline is a bit chunky

 

[loveha]

It's no lightweight woods gun but not bad if I slide the bipod out of the way. The Warne Skyline is a bit chunky

Doesn't want to flop over upside down then? That is the issue when you put a QD on the bottom. Because there is a lot more aluminum at the end there too preferably put in a flush cup.

 

[PoniesWhee]

Doesn't want to flop over upside down then? That is the issue when you put a QD on the bottom. Because there is a lot more aluminum at the end there too preferably put in a flush cup.

Nah it's not trying to flip over on me. I think either the side or the front would work fine. The barrel rides high enough and the channel has so much room that I don't think there's even a remote chance of barrel contact if you put a flush cup in the side

 

[MDT_OFFICIAL]

Not the most elegant solution but it works

View attachment 7137929View attachment 7137930

Great job, thank you for sharing!

 

[seansmd]

Great. Do you have the min- lop?

More @Diver160651 stuff to be listed in the px ??

 

[BigdaddyWSM]

Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?

 

[PoniesWhee]

Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?

Any AR-15 grip I believe. The one that comes with it is really nice, you may want to hold off on ordering a grip until you try it.

 

[Bayhawk21]

Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?

I'd suggest AR-15 grips without a beaver tail.

 

[MDT_OFFICIAL]

Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?

Comes with a grip already; however, any AR-15 grip without beavertail will do. I run our vertical grip on mine; it's awesome!

 

[n00g7]

Comes with a grip already; however, any AR-15 grip without beavertail will do. I run our vertical grip on mine; it's awesome!

What’s the probability of seeing an LSS (either size) for a Howa mini with a fixed interface? Leaning towards an Oryx because I dislike looking at buffer tubes (and stock adaptors) on a bolt action.

 

[MDT_OFFICIAL]

What’s the probability of seeing an LSS (either size) for a Howa mini with a fixed interface? Leaning towards an Oryx because I dislike looking at buffer tubes (and stock adaptors) on a bolt action.

There are no plans at this time, however, you can always run a carbine to fixed stock adapter and a fixed buttstock.

Carbine to Fixed Stock Adapter

The Fixed Stock adapter connects to any of our carbine interface chassis enabling the use of a fixed buttstock. Connect our MDT Skeleton Rifle Stock to an MDT chassis that is equipped for a carbine stock. The Carbine to Fixed Stock Adapter installs in seconds and increased the modularity of our...

mdttac.com

 

[n00g7]

There are no plans at this time, however, you can always run a carbine to fixed stock adapter and a fixed buttstock.

Carbine to Fixed Stock Adapter

The Fixed Stock adapter connects to any of our carbine interface chassis enabling the use of a fixed buttstock. Connect our MDT Skeleton Rifle Stock to an MDT chassis that is equipped for a carbine stock. The Carbine to Fixed Stock Adapter installs in seconds and increased the modularity of our...

mdttac.com

Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.

 

[MDT_OFFICIAL]

Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.

Fair enough, we do provide the option should someone want it.

 

[Rangerbob33]

Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.

I have a Howa Mini in a MDT Brownells BRN-1 with the MDT Skeleton stock. I don't think it's that bad.

 

[n00g7]

I have a Howa Mini in a MDT Brownells BRN-1 with the MDT Skeleton stock. I don't think it's that bad.

Ok, it’s not nearly as offensive as I thought it would be, but LOP is too long with the adapter. Will be going with a LSS+carbine unless I decide I might want to steal it from the wife and play around with it in production (would have to run the oryx to mimic a factory rifle.)

 

[Rangerbob33]

I have the shorter Skeleton stock as they make two lengths. For what it's worth I have an Oryx also, my Tikka T3x in 223 is in it.

 

[MDT_OFFICIAL]

@n00g7 We do have the Howa Mini Youth in the Oryx which is a shorter LOP as well.

 

[sambo11510]

I have a possible dumb question. I have TC compass in 7mm rem mag. I assume we would run the factory mag correct?

 

[erwos]

Any chance of seeing a version of the Oryx for the Ruger American AR mag rifles?

 

[MDT_OFFICIAL]

I have a possible dumb question. I have TC compass in 7mm rem mag. I assume we would run the factory mag correct?

Any chance of seeing a version of the Oryx for the Ruger American AR mag rifles?

We only offer a short action chassis for the TC Compass at this time which will not fit your 7MM Remington Magnum version. However, make sure to leave a request on the Oryx website. Also, there are no plans to offer a Ruger American AR version to the Oryx lineup; however, we do have the LSS-XL Gen 2 available for your rifle.

Oryx Oryx Product Request

Complete bolt action chassis system for under $400. Available for Savage, Howa, Tikka and more!

oryxchassis.com

 

[erwos]

I was aware of the LSS-XL Gen2; it's simply that once I put a stock on that chassis, it's like 50-100% more than the Oryx. I very much liked the idea of a spending $400 and having a usable chassis. Ah well.

 

[MDT_OFFICIAL]

I was aware of the LSS-XL Gen2; it's simply that once I put a stock on that chassis, it's like 50-100% more than the Oryx. I very much liked the idea of a spending $400 and having a usable chassis. Ah well.

That is true. but keep in mind it is built for standard AR-15 parts so if you would like to install an entry-level stock there is a lot of choices!

 

[JAMER]

Sorry if I missed it in this thread... I have ordered a Howa 1500 in 6mm Creedmoor and the Oryx stock. I handload and would like to get a magazine with lots of COAL room so I can load long if need be; I'll be using larger bullets like the 110gr SMK.

I know this takes AICS magazines, but which tend to accommodate longer COAL or can be windowed?

Thanks